So for the others out there I might have found the issue with the 3.5mm audio stutter...
In my case, as NOOB, too much of diving in and not reading & following the steps. If I load the image on to the SD card and fire up without adjusting any settings I cannot see the player. So from there I SSH'd to the rPi and ran picoreplayer. Then using option 5 I set the MAC address to a "Slim Devices" one and restarted (6). Bingo it pops up in LMS as "SqueezeLite" and I can play but get the stutter. What I should have done was to SSH to the rPi and run picoreplayer. Then use option 2 & 6. This time it pops up in LMS as "piCorePlayer" and plays without any stutter. So there is more to option 2 than just setting the audio to the 3.5mm socket. The overall volume is still on the low side but no doubt that is a hardware limitation. Using "amixeser PCM 400" sets it as loud as it can go until the next reboot so need to find how to make that a permanent change. ------------------------------------------------------------------------ garym999's Profile: http://forums.slimdevices.com/member.php?userid=4943 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix