Greg Erskine wrote: > hi jclctr, > > Can you run the wifi diagnostics, it gives us all the data we need. > > [Main Page] in [Beta] mode > [Wifi Settings] > [Diagnostics] > > The generated log file can be accessed via: > > [Main Page] in [Beta] mode > [Diagnostics] > [Logs] > > Can you try an Ethernet cable? > > I don't think any of your ideas are worth pursuing as I feel it is your > USB wifi adaptor that is the problem and pCP runs in RAM. > > You could try increasing your buffers, first field in [ALSA setting] on > the [Squeezelite Settings] page. Post your current settings. > > regards > Greg
1.676520] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.676787] Indeed it is in host mode hprt0 = 00001101 [ 1.852785] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 1.852808] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.853653] hub 1-1:1.0: USB hub found [ 1.853762] hub 1-1:1.0: 5 ports detected [ 2.001587] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ 2.036018] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 2.072171] bcm2708_i2c 3f804000.i2c: BSC1 Controller at 0x3f804000 (irq 83) (baudrate 100000) [ 2.130453] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 2.218736] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 2.218755] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.221745] smsc95xx v1.0.4 [ 2.266175] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:98:23 [ 2.342443] usb 1-1.4: new high-speed USB device number 4 using dwc_otg [ 2.431867] usb 1-1.4: New USB device found, idVendor=7392, idProduct=7811 [ 2.431883] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.431896] usb 1-1.4: Product: 802.11n WLAN Adapter [ 2.431908] usb 1-1.4: Manufacturer: Realtek [ 2.431921] usb 1-1.4: SerialNumber: 00e04c000001 [ 4.042305] zram: Added device: zram0 [ 4.061553] zram0: detected capacity change from 0 to 233975808 [ 4.068453] random: mkswap: uninitialized urandom read (16 bytes read, 60 bits of entropy available) [ 4.075037] Adding 228488k swap on /dev/zram0. Priority:-1 extents:1 across:228488k SSFS [ 4.235609] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 5.813174] EXT4-fs (mmcblk0p2): recovery complete [ 5.982558] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.080856] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 10.741262] snd-hifiberry-digi soc:sound: ASoC: CODEC DAI wm8804-spdif not registered [ 10.741300] snd-hifiberry-digi soc:sound: snd_soc_register_card() failed: -517 [ 10.744207] wm8804 1-003b: revision E [ 10.756844] snd-hifiberry-digi soc:sound: wm8804-spdif <-> 3f203000.i2s mapping ok [ 11.108686] random: nonblocking pool is initialized [ 11.117290] usbcore: registered new interface driver rtl8192cu [ 11.964961] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup ====================================================================================== ######################### # Edit the variables below to setup a wifi based system without LAN access # Change Wifi to "on". Valid options for Encryption are "WEP", "WPA" or "OPEN" WIFI="on" SSID=xxxx PASSWORD=xxxx ENCRYPTION="WPA" # End Wifi setup ########################## NAME="piCorePlayer" OUTPUT="hw:CARD=sndrpihifiberry" ALSA_PARAMS="80:4::1" BUFFER_SIZE="" _CODEC="" XCODEC="" PRIORITY="" MAX_RATE="" UPSAMPLE="" MAC_ADDRESS="" SERVER_IP="" LOGLEVEL="" LOGFILE="" DSDOUT="" VISUALISER="" CLOSEOUT="" UNMUTE="" ALSAVOLUME="" OTHER="" AUDIO="hifi_digi" HOST="piCorePlayer" TIMEZONE="PST8PDT,M3.2.0,M11.1.0" OVERCLOCK="NONE" ADVOVERCLOCK="None" CMD="Default" FIQ="0xF" ALSAlevelout="Default" ALSAeq="no" REBOOT="Disabled" RB_H="0" RB_WD="*" RB_DMONTH="*" RESTART="Disabled" RS_H="0" RS_WD="*" RS_DMONTH="*" CRON_COMMAND="" AUTOSTARTLMS="" A_S_LMS="Disabled" AUTOSTARTFAV="" A_S_FAV="Disabled" USER_COMMAND_1="" USER_COMMAND_2="" USER_COMMAND_3="" JIVELITE="no" SCREENROTATE="no" SHAIRPORT="no" LMSERVER="no" LMSDATA="default" MOUNTPOINT="" MOUNTUUID="no" NETMOUNT1POINT="" NETMOUNT1="no" NETMOUNT1IP="" NETMOUNT1SHARE="" NETMOUNT1FSTYPE="" NETMOUNT1USER="" NETMOUNT1PASS="" NETMOUNT1OPTIONS="" SQLT_VERSION="basic" SQUEEZELITE="yes" POWER_GPIO="" POWER_OUTPUT="L" POWER_SCRIPT="" IR_LIRC="no" IR_GPIO_IN="25" IR_GPIO_OUT="" IR_DEVICE="lirc0" IR_CONFIG="" LMSWEBPORT="" FSM="Default" LMSCONTROLS="yes" PLAYERTABS="yes" HDMIPOWER="on" RPI3INTWIFI="on" SAMBA="disabled" WOL="no" WOL_NIC="" WOL_LMSMACADDRESS="" SPARAMS1="" SPARAMS2="" SPARAMS3="" SPARAMS4="" SPARAMS5="" Hope this is what you wanted to see. Thanks very much. Mark ------------------------------------------------------------------------ jclctr's Profile: http://forums.slimdevices.com/member.php?userid=65926 View this thread: http://forums.slimdevices.com/showthread.php?t=106755 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
