paul- wrote: > There were several users trying to get the Merus Amp to work. I think I > finally cracked it. > > _Disable_onboard_audio_ > dtparm=audio=off > > _Disable_SPI_ > Remove the spi=on from the line > > Code: -------------------- > > > deparam=i2c_arm=on,spi=on,i2s=on -------------------- > > > > Then on the Squeezelite page, make sure you limit the sample rate to > 48000. > > Also, make sure you do not play any music until you have turned down > the Limit Threashold as described in the docs. If you try to play > music with the default Alsa settings, it will likely lockup the > amplifier chip requiring a reboot. > > Once things are set in alsa mixer, then you should save the alsa > settings on the "Card Control" Page. > > I'll see about adding some better controls in pCP7.
Hi Paul, firstly I want to say I really appreciate all the work your team has done on this. I followed the instructions above but I am stuck on the Limit Threshold setting. Where do I find/change that? Thanks Current: Windows 10 - LMS Server 7.9.3 8TB RAID 10 Media Drive Office - Windows 10 - Squeezelite-X Living Room - 2x RPiZeroW w/ Allo MiniBoss each running a Logitech Z623 System Family Room (TV) - 1X RPi3B+ HDMI to Denon Surround Receiver 7.2 System Bedroom 1x RPiZeroW with HiFiBerry MiniAmp to 2X POLK OWM3's All running piCorePlayer 6.1.0 and synchronized. Building Pi Boombox - RPi3B+ w/ HiFiBerry DAC+, Touch Screen in place of Cassette Decks ------------------------------------------------------------------------ micmed's Profile: http://forums.slimdevices.com/member.php?userid=67919 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix