On Aug 31, 2006, at 11:08 AM, Marty Knapp wrote:
I was talking with a guy yesterday who said that using Basic you
could use the printer port on Windows to talk to a stepper motor. I
know pretty much nothing about robotics (or communicating through
ports for that matter). Does anyone know if this is possible with
Rev? I read through the docs and could see that one can read from
and write data to com ports and LPT ports, but wouldn't a stepper
motor just need electrical pulses sent to it?
I realize I'm revealing my ignorance to the world here, but any
help would be appreciated.
The stepper motor does not use pulses in that sense, but phase
changes. You won't be able to drive the motor directly with TTL, you
will need to do level shifting. Some motors need current going both
directions, so this might get involved.
The printer port has gotten pretty smart since the last time I used
it, so this might or might not work. It might be worth a try. In
the BIOS set the printer port to the simplest form you can find. It
might be called classic. You can find some printer port data
online. You might be able to rig it so the handshake is always there
or it always responds to each byte sent out. Better, put in a
oneshot or other delay so you can write several bytes and have the
motor moving at that speed. You would drive the motor by sending
four or 8 letters to it in a repeating sequence.
I have used a driver that makes all bits available for bit twiddling,
so you can get input. I forgot the name and I don't think it was
being maintained last I used it. I have read about another that
makes this bit twiddling I/O available as though you have a serial port.
I'd look around online for output-only printer port I/O tips.
You might have trouble with jitter and getting up to speed.
You might be better off getting a hobby robot control board from many
sources and using a serial interface. You can also try some toy/
educational robots.
None of those will do microstepping, but if you have a motor that
needs both positive and negative currents, you might have off as a
half step.
Dar Scott
_______________________________________________
use-revolution mailing list
use-revolution@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription
preferences:
http://lists.runrev.com/mailman/listinfo/use-revolution
