Hi, use the key file at /root/.ssh/id_rsa.cloud If it not found, locate key file
Thanks, Jayapal On 18-Oct-2013, at 2:41 AM, motty cruz <motty.c...@gmail.com> wrote: > Thanks Peter, > I tried the command you suggested, > > [root@kvm1 network-scripts]# ssh -i .ssh/id_rsa.cloud -p 3922 169.254.3.53 > Warning: Identity file .ssh/id_rsa.cloud not accessible: No such file or > directory. > ssh: connect to host 169.254.3.53 port 3922: No route to host > [root@kvm1 network-scripts]# > > do you mind providing the config file of your vlans? I believe VLANs are > not configure properly > here is my management/storage bridge > less ifcfg-eth1: > > DEVICE=eth1 > HWADDR=00:25:90:88:51:5D > ONBOOT=yes > BRIDGE=cloudbr1 > [root@kvm1 network-scripts]# > > less ifcfg-cloudbr1: > DEVICE=cloudbr1 > ONBOOT=yes > TYPE=Bridge > IPADDR=10.107.0.7 > NETMASK=255.255.255.0 > DNS1=8.8.8.8 > DNS2=10.0.10.0 > > Thank you for your support! > > > On Thu, Oct 17, 2013 at 1:45 PM, Erdősi Péter <f...@niif.hu> wrote: > >> Hello! >> >> I stucked something like this in Xen. >> The problem was the networks (and vlans) on sysvm. >> Can you ssh it (in xen, ssh -i .ssh/id_rsa.cloud -p 3922 169.254.X.Y >> from the xen host machine, which own the guest), and check the network >> avaibility of the system vm? >> >> Best regards, >> Peter >> >> >> 2013.10.17. 22:31 keltezéssel, motty cruz írta: >> >> Hello, install Cloudstack 4.2 with KVM hypervisors, Console Proxy MV >>> started but I am not able to ping the private or public IP, second VM >>> won't >>> start. When I ran the command >>> [root@kvm1 network-scripts]# virsh list >>> Id Name State >>> ------------------------------**---------------------- >>> 2 v-2-VM running >>> 4 s-3-VM running >>> >>> [root@kvm1 network-scripts]# >>> >>> I see both VMs running; I configured zone with advance network, >>> guest/public network on eth0, management/storage on eth1 >>> >>> any ideas or suggestions? >>> >>> Thanks, >>> >>> >>