Hi,
You're welcome, but.. can You start the vnc session?
If yes, what did you saw on a local console?
Peter
2013.10.20. 4:21 keltezéssel, motty cruz írta:
Thanks Fazy,
when I ran the command dumpxml s-28-VM,
[root@kvm1 networks]# virsh
Welcome to virsh, the virtualization interactive terminal.
Type: 'help' for help with commands
'quit' to quit
virsh # dumpxml s-28-VM
<graphics type='vnc' port='5900' autoport='yes' listen='0.0.0.0'>
<listen type='address' address='0.0.0.0'/>
</graphics>
On Sat, Oct 19, 2013 at 12:05 PM, Erdősi Péter <f...@niif.hu> wrote:
Hy,
2013.10.19. 19:59 keltezéssel, motty cruz írta:
Thanks for you support on this matter! it is of a streamly importance. I
can't VNC into the macine, I get the error "no route to hosts"
But this is not goes over ethernet. Just connect to the vm-s console same
as a non-cloud kvm vm.
You should check the console settings of this vm by the dom xml.
You can do the check if you write to virsh:
virsh # dumpxml s-3-VM
You should see something like this: <graphics type='vnc' port='-1'
autoport='yes' keymap='en-us'/>
This is a tutorial, how can you connect to VNC
http://www.cyberciti.biz/faq/**linux-kvm-vnc-for-guest-**machine/<http://www.cyberciti.biz/faq/linux-kvm-vnc-for-guest-machine/>
Regards,
Fazy
yes the zone is enable!
I personally don't think it has to do with VLANs because management
traffic
does not have VLANs but I could be wrong, also I disabled iptables and
selinux but not able to resolve this issue.
On Sat, Oct 19, 2013 at 10:08 AM, raj kumar <rajkumar600...@gmail.com>**
wrote:
Can you check whether zone is enabled? if not enabled it.
On Sat, Oct 19, 2013 at 9:34 PM, Erdősi Péter <f...@niif.hu> wrote:
Hy,
Can you try to vnc to sysvm machine?
root/password should be work, if you use the default sysvm template.
Peter
2013.10.19. 17:33 keltezéssel, motty cruz írta:
thank you;
I found the file :
[root@kvm1 .ssh]# ls
id_rsa.cloud id_rsa.pub.cloud known_hosts
[root@kvm1 .ssh]#
[root@kvm1 network-scripts]# ssh -i ~/.ssh/id_rsa.cloud -p 3922
169.254.2.56
ssh: connect to host 169.254.2.56 port 3922: No route to host
[root@kvm1 network-scripts]#
I get no route to host, I'm running out of ideas. please help
On Thu, Oct 17, 2013 at 9:15 PM, Jayapal Reddy Uradi <
jayapalreddy.ur...@citrix.com> wrote:
Hi,
use the key file at /root/.ssh/id_rsa.cloud
If it not found, locate key file
Thanks,
Jayapal
On 18-Oct-2013, at 2:41 AM, motty cruz <motty.c...@gmail.com> wrote:
Thanks Peter,
I tried the command you suggested,
[root@kvm1 network-scripts]# ssh -i .ssh/id_rsa.cloud -p 3922
169.254.3.53
Warning: Identity file .ssh/id_rsa.cloud not accessible: No such file
or
directory.
ssh: connect to host 169.254.3.53 port 3922: No route to host
[root@kvm1 network-scripts]#
do you mind providing the config file of your vlans? I believe VLANs
are
not configure properly
here is my management/storage bridge
less ifcfg-eth1:
DEVICE=eth1
HWADDR=00:25:90:88:51:5D
ONBOOT=yes
BRIDGE=cloudbr1
[root@kvm1 network-scripts]#
less ifcfg-cloudbr1:
DEVICE=cloudbr1
ONBOOT=yes
TYPE=Bridge
IPADDR=10.107.0.7
NETMASK=255.255.255.0
DNS1=8.8.8.8
DNS2=10.0.10.0
Thank you for your support!
On Thu, Oct 17, 2013 at 1:45 PM, Erdősi Péter <f...@niif.hu> wrote:
Hello!
I stucked something like this in Xen.
The problem was the networks (and vlans) on sysvm.
Can you ssh it (in xen, ssh -i .ssh/id_rsa.cloud -p 3922
169.254.X.Y
from the xen host machine, which own the guest), and check the
network
avaibility of the system vm?
Best regards,
Peter
2013.10.17. 22:31 keltezéssel, motty cruz írta:
Hello, install Cloudstack 4.2 with KVM hypervisors, Console Proxy MV
started but I am not able to ping the private or public IP, second
VM
won't
start. When I ran the command
[root@kvm1 network-scripts]# virsh list
Id Name State
------------------------------******----------------------
2 v-2-VM running
4 s-3-VM running
[root@kvm1 network-scripts]#
I see both VMs running; I configured zone with advance network,
guest/public network on eth0, management/storage on eth1
any ideas or suggestions?
Thanks,
