Hi, Ok,we will give up Security Groups option but if we use NAT + Shared network, Is it possible to evaluate both ethernet usage which taken ACS? and Can we will see ethernet usage separately?
Thanks. 2016-02-04 17:06 GMT+02:00 Nux! <n...@li.nux.ro>: > Hello, > > You can't have Security Groups in a pure advanced zone (ie without > security groups). > If you opt for an Advanced zone with Security Groups then you can't have > more than one NIC per VM (sux, I know). > So basically it can't be done. > > The closest you can go for IMHO is in an Advanced Zone to add your VM to a > NAT-ed 10.x network (I highly discourage you to use /8) and if you really > must have public IPs, then go for a shared network - however security > groups are not available, so you will need to firewall this somehow > yourself. > > HTH > Lucian > > -- > Sent from the Delta quadrant using Borg technology! > > Nux! > www.nux.ro > > ----- Original Message ----- > > From: "Semih Tolga DEMİR" <semihtolgade...@gmail.com> > > To: users@cloudstack.apache.org > > Sent: Thursday, 4 February, 2016 11:51:48 > > Subject: Adding Ethernet Card > > > Hi; > > > > I need to setup/design an advanced networking with the following features > > like below and i like to ask if its possbile or not. > > > > > > > > All vm's have 2 ethernet cards. > > > > 1) This ethernet uses real ip(public) for internet access with security > > groups enabled. This ethernets, networks default gateway directly points > to > > the gateway at network, it will not pass thru ACS virtual router, we do > not > > want to make any NAT or SNAT operation over ACS virtual router. > > > > > > > > 2) This ethernet will use virtual ip like 10.0.0.0/8 for guest network > and > > all vm's use this ip for vm interconnect. > > > > > > > > After this setup we like to calculate bandwidth usage only for the first > > ethernet card, we do not want to calculate usage for vm interconnect. > > > > > > > > Thanks >
