Hi Lucian, We are aware that both ip addresses are distributed over separate nics over hypervisor.
We need to calculate only internet usage only for public ethernet interface, for IAAS like usage. Is it possible to get/calculate each nics network usage separately over ACS? Thanks. 2016-02-04 18:30 GMT+02:00 Nux! <n...@li.nux.ro>: > Virtual NICs/networks can be linked to different physical interfaces on > the hypervisor, if that's what you're asking. > > -- > Sent from the Delta quadrant using Borg technology! > > Nux! > www.nux.ro > > ----- Original Message ----- > > From: "Semih Tolga DEMİR" <semihtolgade...@gmail.com> > > To: users@cloudstack.apache.org > > Sent: Thursday, 4 February, 2016 16:12:37 > > Subject: Re: Adding Ethernet Card > > > Hi, > > > > Ok,we will give up Security Groups option but if we use NAT + Shared > > network, Is it possible to evaluate both ethernet usage which taken ACS? > > and Can we will see ethernet usage separately? > > > > Thanks. > > > > 2016-02-04 17:06 GMT+02:00 Nux! <n...@li.nux.ro>: > > > >> Hello, > >> > >> You can't have Security Groups in a pure advanced zone (ie without > >> security groups). > >> If you opt for an Advanced zone with Security Groups then you can't have > >> more than one NIC per VM (sux, I know). > >> So basically it can't be done. > >> > >> The closest you can go for IMHO is in an Advanced Zone to add your VM > to a > >> NAT-ed 10.x network (I highly discourage you to use /8) and if you > really > >> must have public IPs, then go for a shared network - however security > >> groups are not available, so you will need to firewall this somehow > >> yourself. > >> > >> HTH > >> Lucian > >> > >> -- > >> Sent from the Delta quadrant using Borg technology! > >> > >> Nux! > >> www.nux.ro > >> > >> ----- Original Message ----- > >> > From: "Semih Tolga DEMİR" <semihtolgade...@gmail.com> > >> > To: users@cloudstack.apache.org > >> > Sent: Thursday, 4 February, 2016 11:51:48 > >> > Subject: Adding Ethernet Card > >> > >> > Hi; > >> > > >> > I need to setup/design an advanced networking with the following > features > >> > like below and i like to ask if its possbile or not. > >> > > >> > > >> > > >> > All vm's have 2 ethernet cards. > >> > > >> > 1) This ethernet uses real ip(public) for internet access with > security > >> > groups enabled. This ethernets, networks default gateway directly > points > >> to > >> > the gateway at network, it will not pass thru ACS virtual router, we > do > >> not > >> > want to make any NAT or SNAT operation over ACS virtual router. > >> > > >> > > >> > > >> > 2) This ethernet will use virtual ip like 10.0.0.0/8 for guest > network > >> and > >> > all vm's use this ip for vm interconnect. > >> > > >> > > >> > > >> > After this setup we like to calculate bandwidth usage only for the > first > >> > ethernet card, we do not want to calculate usage for vm interconnect. > >> > > >> > > >> > > >> > Thanks >
