Hi all, I'm new to Kannel and im trying to get my nokia 6150 to work as an smsc. i'm running gateway-1.2.0 (compiled under redhat 7.2).
the bearer box comes up no problem with no errors and the AT2 thread gets as far as "start called" (see below) but never sends or receives any messages. so it seems that i've got the correct device, and the "AT" command is accepted successfully. Also, the http status page always shows the phone status as "connecting" (my guess is that it should change to "connected" at some point?). Im using the supplied modems.conf (unaltered) with the following excerpt from kannel.conf (im fairly confident that my smsbox is configured correctly as i get "Sent." as a response to my sms push): group = core admin-port = 13000 smsbox-port = 13001 admin-password = *** admin-deny-ip = "*.*.*.*" admin-allow-ip = "127.0.0.1" log-file = "/home/kannel/log/main.log" log-level = 0 box-deny-ip = "*.*.*.*" box-allow-ip = "127.0.0.1" unified-prefix = "00358,0" access-log = "/home/kannel/log/access.log" #include modems include = "/home/kannel/conf/modems.conf" # SMSC CONNECTIONS group = smsc smsc = at2 modemtype = nokiaphone device = /dev/ttyS1 #speed = 9600 #keepalive = 4 smsc-id = nk6150 #port = 10000 #connect-allow-ip = 127.0.0.1 the log file: 2002-08-19 11:36:16 [0] INFO: Added logfile `/home/kannel/log/main.log' with level `0'. 2002-08-19 11:36:16 [0] INFO: ---------------------------------------- 2002-08-19 11:36:16 [0] INFO: Kannel bearerbox II version 1.2.0 starting 2002-08-19 11:36:16 [0] INFO: Started access logfile `/home/kannel/log/access.log'. 2002-08-19 11:36:16 [0] DEBUG: HTTP: Opening server at port 13000. 2002-08-19 11:36:16 [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller) 2002-08-19 11:36:16 [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread) 2002-08-19 11:36:16 [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run) 2002-08-19 11:36:16 [0] DEBUG: starting smsbox connection module 2002-08-19 11:36:16 [0] DEBUG: Started thread 4 (gw/bb_boxc.c:smsboxc_run) 2002-08-19 11:36:16 [0] INFO: AT2[nk6150]: configuration shows modemtype <nokiaphone> 2002-08-19 11:36:16 [0] DEBUG: AT2[nk6150]: Reading modem definitions from <../conf/kannel.conf> 2002-08-19 11:36:16 [0] DEBUG: Loading include file `/home/kannel/conf/modems.conf' (on line 36 of file ../conf/kannel.conf). 2002-08-19 11:36:16 [0] DEBUG: AT2[nk6150]: Found <10> modems in config 2002-08-19 11:36:16 [0] INFO: AT2[nk6150]: read modem definition for <Nokia Phone> 2002-08-19 11:36:16 [0] DEBUG: Started thread 5 (gw/smsc_at2.c:at2_device_thread) 2002-08-19 11:36:16 [5] INFO: AT2[nk6150]: trying to use speed <9600> from modem definition 2002-08-19 11:36:16 [5] INFO: AT2[nk6150]: opening device 2002-08-19 11:36:16 [5] DEBUG: AT2[nk6150]: device opened 2002-08-19 11:36:16 [5] INFO: AT2[nk6150]: speed set to 9600 2002-08-19 11:36:16 [5] DEBUG: AT2[nk6150]: --> ^M 2002-08-19 11:36:16 [0] DEBUG: Started thread 6 (gw/bb_smscconn.c:sms_router) 2002-08-19 11:36:16 [0] INFO: MAIN: Start-up done, entering mainloop 2002-08-19 11:36:16 [0] DEBUG: AT2[nk6150]: start called 2002-08-19 11:36:16 [6] DEBUG: sms_router: time to sleep 2002-08-19 11:36:16 [6] DEBUG: sms_router: list_len = 0 (Incidently, gnokii code works no problem with the same phone and device name /dev/ttyS1.) Any help would be greatly appreciated, Wilf (Neil Wilkinson) --