I found the thread: In kannel userlist the thread is called "Connecting USB GSM phones" dated 8-10-06
Hope helps Alvaro |-----------------------------------------------------------------------------------------------------------------| Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier celular y Nextel en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y GPRS online Visitenos en www.perusms.NET www.smsglobal.com.mx y www.pravcom.com On Thu, Jun 11, 2009 at 8:38 PM, Dennis Low Weng Kin<powered182...@live.com> wrote: > Thanks > > >> Date: Thu, 11 Jun 2009 20:44:46 +0200 >> From: m...@arvanta.net >> To: users@kannel.org >> Subject: Re: Unplugging USB GSM Modem and replugging >> >> On Thu, 2009-06-11 at 12:43, Alvaro Cornejo wrote: >> > There was a thread about this sometime ago. I'll try to look for it >> > later. >> > >> > Note that, for the workarround above, you might get into troubles if >> > you do have several equal usb modems. >> > >> > Each modem will have its own sim with -maybe- different >> > carrier/service/plan/etc. With the above procedure, you will remap any >> > one of the removed modems to the next recognized device and if you do >> > get to remove two or more.... you might finish sending messages >> > through the wrong modem. >> >> The solution can be to use different modems/phones with different USB >> id's. >> >> Or maybe there are modems/phones with serial id's. >> >> > As said above, there was thread that provides a way through a script >> > to remap an specific usb device to an specific usb port. I didn't >> > tested that solution but looked to be the right solution. >> >> -- >> Kind regards, Milan >> > > ________________________________ > See all the ways you can stay connected to friends and family