Bonjour Nathanael, You haven't mentioned which version of oVirt you were using - I suspect it's pre-3.5 and therefore this isn't fixed yet: https://bugzilla.redhat.com/show_bug.cgi?id=1114085
>From 3.5 onwards the warning should not appear for a bond (in aggregating mode) if only one of its slaves is overloaded. A bientot, Lior. On 18/03/15 18:17, Nathanaël Blanchet wrote: > Hi all, > > I'm used to create a mode 4 bond0 interface with two 1 Gb/s interfaces > on all my hosts, and ethtool bond0 gives me a functionnal 2000Mb/s. > However, when importing a vm from the export domain (NFS with a speed of > 4GB/s), I always have this alert: > "Host siple has network interface which exceeded the defined threshold > [95%] (em3: transmit rate[0%], receive rate [100%])" > It seems that the second nic never works while the first one is overloaded. > Is it an expected behaviour? I believed that the flow was balanced > between the two interfaces in 802.3ad mode. > > > > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users