Yes, i changed it to use Anonymous and its working now. Now i need some documents or suggestions on how to configure Mem settings and flow to disk settings in config.json
Thanks, Ram On Fri, Aug 26, 2016 at 12:16 PM, Rob Godfrey <rob.j.godf...@gmail.com> wrote: > Hi Ram, > > I assume that you have configured port 5672 to use the Plain auth provider > (each port can only be associated with a single auth provider - you can add > other ports which use the a different auth provider). The issue here is > that by default the Java Broker will not allow PLAIN SASL over a non-TLS > connection. You can override this by changing the "secureOnlyMechanisms" > attribute of the (password) auth provider. Setting this value to the empty > list within the password auth provider section > > "secureOnlyMechanisms" : [ ], > > in your json config file, will mean than PLAIN will be offered as a > mechanism. > > Alternatively you can change your port configuration to use you anonymous > authentication provider, rather than the password provider. > > Hope this helps, > Rob > > > On 26 August 2016 at 19:27, rammohan ganapavarapu <rammohanga...@gmail.com > > > wrote: > > > Rob, > > > > I have followed as you said and created a clean slate v6 broker and from > UI > > created two auth provides palin and anonimous but when i make this api > call > > i am getting different sasl list > > > > curl -s http://localhost:10001/service/sasl > > { > > "mechanisms" : [ "CRAM-MD5", "SCRAM-SHA-1", "SCRAM-SHA-256" ] > > > > and as you told you before my client is throwing this error, so client > has > > a logic to try Plain with user guest first if it doesn't work then try > > anonymous. Since broker doesn't have any of those in its sasl list may be > > its not able to connect? > > > > > > url=amqp://guest:********@/?brokerlist='tcp://host:5672? > > connecttimeout='5000'&sasl_mechs='PLAIN'' > > Not Connected. error Client and broker have no SASL mechanisms in common. > > Broker allows : CRAM-MD5 SCRAM-SHA-1 SCRAM-SHA-256 Client has : > [EXTERNAL, > > GSSAPI, SCRAM-SHA-256, SCRAM-SHA-1, CRAM-MD5-HASHED, CRAM-MD5, PLAIN, > > AMQPLAIN, ANONYMOUS, XOAUTH2] Client restricted itself to : PLAIN > > username=guest > > > > > > and > > > > url=amqp://guest:********@/?brokerlist='tcp://host:5672? > > connecttimeout='5000'&sasl_mechs='ANONYMOUS'' > > Not Connected. error Client and broker have no SASL mechanisms in common. > > Broker allows : CRAM-MD5 SCRAM-SHA-1 SCRAM-SHA-256 Client has : > [EXTERNAL, > > GSSAPI, SCRAM-SHA-256, SCRAM-SHA-1, CRAM-MD5-HASHED, CRAM-MD5, PLAIN, > > AMQPLAIN, ANONYMOUS, XOAUTH2] Client restricted itself to : ANONYMOUS > > username=null > > > > Thanks, > > Ram > > > > On Tue, Apr 19, 2016 at 10:10 AM, rammohan ganapavarapu < > > rammohanga...@gmail.com> wrote: > > > > > Hi Rob, > > > > > > I did not get chance to try v6, i will try and let you know. > > > > > > Ram > > > > > > On Tue, Apr 19, 2016 at 12:56 AM, Rob Godfrey <rob.j.godf...@gmail.com > > > > > wrote: > > > > > >> Hi Ram, > > >> > > >> have you got v6 working now? The memory settings for the broker > depend > > >> upon which version you are using. For version 6 there is a > > comprehensive > > >> discussion on memory allocation settings in the manual: > > >> https://qpid.apache.org/releases/qpid-java-6.0.1/java- > > >> broker/book/Java-Broker-Runtime-Memory.html > > >> > > >> Versions prior to v6 use memory (and threads) very differently. > > >> > > >> Hope this helps, > > >> Rob > > >> > > >> On 18 April 2016 at 22:09, rammohan ganapavarapu < > > rammohanga...@gmail.com > > >> > > > >> wrote: > > >> > > >> > Rob, > > >> > > > >> > One more question in the same context, what are the recommended JVM > > >> > settings for java broker? i am using default "-Xmx1024m" its working > > >> fine > > >> > but i wanted to follow the best practices. Please advice. > > >> > > > >> > > > >> > Thanks, > > >> > Ram > > >> > > > >> > On Wed, Apr 13, 2016 at 6:46 AM, Rob Godfrey < > rob.j.godf...@gmail.com > > > > > >> > wrote: > > >> > > > >> > > Hi Ram, > > >> > > > > >> > > Apologies, I've been having a few issues with my internet > provider. > > >> > > > > >> > > Can you try setting up an entirely clean install of Qpid 6.0.1 and > > >> > > configuring (through the UI) that to use ANONYMOUS, and then check > > >> your > > >> > > client can connect. > > >> > > > > >> > > This is what I did, and it works fine for me. > > >> > > > > >> > > For the rest of your requirements (like setting the log file > > location, > > >> > > etc.) you really want to be using version 6 or later. > > >> > > > > >> > > Cheers, > > >> > > Rob > > >> > > > > >> > > On 11 April 2016 at 22:44, rammohan ganapavarapu < > > >> > rammohanga...@gmail.com> > > >> > > wrote: > > >> > > > > >> > > > Rob, > > >> > > > > > >> > > > I have tried with virtualhost config that you have provided but > i > > am > > >> > > still > > >> > > > getting connection error. I would like to make it work with 6.0* > > >> > version > > >> > > > but at this point i need 0.28 version to make working, so if you > > can > > >> > help > > >> > > > me to configure log location in 0.28 that would unblock me for > > now. > > >> > > > > > >> > > > Thanks, > > >> > > > Ram > > >> > > > > > >> > > > 2016-04-11 21:40:01,845 DelayedTaskExecutor-1 ERROR > > >> > > S.QUEUECLIENTSERVICE - > > >> > > > ConnectionImpl.openConnection() : Error connecting to > Connection > > : > > >> 0 > > >> > > Host = > > >> > > > localhost > > >> > > > > > >> > > > > > >> > > > > >> > url=amqp://guest:********@/?brokerlist='tcp://localhost: > > >> 5672?connecttimeout='5000'&sasl_mechs='PLAIN'' > > >> > > > Not Connected. error Client and broker have no SASL mechanisms > in > > >> > common. > > >> > > > Broker allows : ANONYMOUS Client has : [EXTERNAL, GSSAPI, > > >> > > CRAM-MD5-HASHED, > > >> > > > CRAM-MD5, AMQPLAIN, PLAIN, ANONYMOUS] Client restricted itself > to > > : > > >> > PLAIN > > >> > > > username=guest > > >> > > > > > >> > > > 2016-04-11 21:40:01,846 DelayedTaskExecutor-1 ERROR > > >> > > S.QUEUECLIENTSERVICE - > > >> > > > ConnectionImpl.verifyQueueAndExchange() : Error binding queue > > null > > >> > > > 2016-04-11 21:40:01,846 DelayedTaskExecutor-1 ERROR > > >> > > c.a.a.q.QueueBuilder - > > >> > > > QueueBuilder$1.execute() : Attempt to create exchange/queue > > >> > > > ax-ex-mxgroup001/ax-q-mxgroup001 failed. > > >> > > > > > >> > > > 2016-04-11 21:40:01,861 DelayedTaskExecutor-1 INFO > > >> > > c.a.a.q.QueueBuilder - > > >> > > > QueueBuilder$1.execute() : Creating exchange/queue > > >> > > > ax-ex-mxgroup001-dl/ax-q-mxgroup001-dl > > >> > > > > > >> > > > 2016-04-11 21:40:01,867 DelayedTaskExecutor-1 ERROR > > >> > > S.QUEUECLIENTSERVICE - > > >> > > > ConnectionImpl.openConnection() : Error connecting to > Connection > > : > > >> 0 > > >> > > Host = > > >> > > > localhost > > >> > > > > > >> > > > > > >> > > > > >> > url=amqp://guest:********@/?brokerlist='tcp://localhost: > > >> 5672?connecttimeout='5000'&sasl_mechs='ANONYMOUS'' > > >> > > > Not Connected. error Unknown virtualhost '' username=null > > >> > > > > > >> > > > 2016-04-11 21:40:01,870 DelayedTaskExecutor-1 ERROR > > >> > > S.QUEUECLIENTSERVICE - > > >> > > > ConnectionImpl.openConnection() : Error connecting to > Connection > > : > > >> 0 > > >> > > Host = > > >> > > > localhost > > >> > > > > > >> > > > > > >> > > > > >> > url=amqp://guest:********@/?brokerlist='tcp://localhost: > > >> 5672?connecttimeout='5000'&sasl_mechs='PLAIN'' > > >> > > > Not Connected. error Client and broker have no SASL mechanisms > in > > >> > common. > > >> > > > Broker allows : ANONYMOUS Client has : [EXTERNAL, GSSAPI, > > >> > > CRAM-MD5-HASHED, > > >> > > > CRAM-MD5, AMQPLAIN, PLAIN, ANONYMOUS] Client restricted itself > to > > : > > >> > PLAIN > > >> > > > username=guest > > >> > > > > > >> > > > 2016-04-11 21:40:01,870 DelayedTaskExecutor-1 ERROR > > >> > > S.QUEUECLIENTSERVICE - > > >> > > > ConnectionImpl.verifyQueueAndExchange() : Error binding queue > > null > > >> > > > > > >> > > > On Sun, Apr 10, 2016 at 3:11 PM, Rob Godfrey < > > >> rob.j.godf...@gmail.com> > > >> > > > wrote: > > >> > > > > > >> > > > > Hi Ram, > > >> > > > > > > >> > > > > in 6.0.x the log file location can be changed directly through > > the > > >> > > config > > >> > > > > json - I really think we should first concentrate on getting > > that > > >> > > working > > >> > > > > for you. > > >> > > > > > > >> > > > > I've verified that using the 6.0.x client and broker with a > URL > > >> > similar > > >> > > > to > > >> > > > > the one in your log file works for ANONYMOUS. > > >> > > > > > > >> > > > > Looking at your error output again I notice that there seem > > >> actually > > >> > to > > >> > > > be > > >> > > > > two connection attempts, the first ends with: > > >> > > > > > > >> > > > > error Unknown virtualhost '' username=null > > >> > > > > > > >> > > > > Then we see the second failure with the "PLAIN" error. That > > first > > >> > > error > > >> > > > > indicate that ANONYMOUS log in was actually successful, > however > > >> you > > >> > > were > > >> > > > > the running into the fact that no virtualhost is mapped to the > > >> empty > > >> > > > > string. That suggests to me that you don't have any > > >> > virtualhostaliases > > >> > > > > defined in your (AMQP) port config. I'd suggest that it would > > make > > >> > > sense > > >> > > > to > > >> > > > > craft an initial config based on the default initial config > for > > >> 6.0.x > > >> > > > which > > >> > > > > will include a virtualhostaliases section in the AMQP port > which > > >> > looks > > >> > > > > like: > > >> > > > > > > >> > > > > "virtualhostaliases" : [ { > > >> > > > > "name" : "nameAlias", > > >> > > > > "type" : "nameAlias" > > >> > > > > }, { > > >> > > > > "name" : "defaultAlias", > > >> > > > > "type" : "defaultAlias" > > >> > > > > }, { > > >> > > > > "name" : "hostnameAlias", > > >> > > > > "type" : "hostnameAlias" > > >> > > > > } ] > > >> > > > > > > >> > > > > > > >> > > > > Let me know if this works for you, then we can look at some of > > >> your > > >> > > other > > >> > > > > questions. > > >> > > > > > > >> > > > > -- Rob > > >> > > > > > > >> > > > > > > >> > > > > On 9 April 2016 at 00:31, rammohan ganapavarapu < > > >> > > rammohanga...@gmail.com > > >> > > > > > > >> > > > > wrote: > > >> > > > > > > >> > > > > > Rob, > > >> > > > > > > > >> > > > > > Also how do i pass logfile location as -prop as commandline > > >> > argument? > > >> > > > or > > >> > > > > > how do i change default log file location i know we can > update > > >> > > > log4j.xml > > >> > > > > > but is there any other way? > > >> > > > > > > > >> > > > > > Ram > > >> > > > > > > > >> > > > > > On Fri, Apr 8, 2016 at 11:48 AM, rammohan ganapavarapu < > > >> > > > > > rammohanga...@gmail.com> wrote: > > >> > > > > > > > >> > > > > > > Rob, > > >> > > > > > > > > >> > > > > > > I tried passing properties file as argument but it didnt > > like > > >> it. > > >> > > > Does > > >> > > > > it > > >> > > > > > > support in 0.28v? > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > ./qpid-server -icp ../etc/initial_config.json -prop > > >> > > > > > ../etc/qpidd.properties > > >> > > > > > > > > >> > > > > > > System Properties set to -Damqj.logging.level=info > > >> > > > > > > -DQPID_HOME=/opt/qpid-java-broker -DQPID_WORK=/ebs/ > > >> > > > > > > QPID_OPTS set to -Damqj.read_write_pool_size=32 > > >> > -DQPID_LOG_APPEND= > > >> > > > > > > Using QPID_CLASSPATH > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > /opt/qpid-java-broker/lib/*:/opt/qpid-java-broker/lib/ > > >> plugins/*:/opt/qpid-java-broker/lib/opt/* > > >> > > > > > > Info: QPID_JAVA_GC not set. Defaulting to JAVA_GC > > >> > > > > -XX:+UseConcMarkSweepGC > > >> > > > > > > -XX:+HeapDumpOnOutOfMemoryError > > >> > > > > > > Info: QPID_JAVA_MEM not set. Defaulting to JAVA_MEM > > -Xmx1024m > > >> > > > > > > Exception during startup: java.lang. > > IllegalArgumentException: > > >> > > > > > > Configuration property argument is not of the format > > >> name=value: > > >> > > > > > > ../etc/qpidd.properties > > >> > > > > > > java.lang.IllegalArgumentException: Configuration > property > > >> > argument > > >> > > > is > > >> > > > > > not > > >> > > > > > > of the format name=value: ../etc/qpidd.properties > > >> > > > > > > at org.apache.qpid.server.Main.execute(Main.java:226) > > >> > > > > > > at org.apache.qpid.server.Main.<init>(Main.java:134) > > >> > > > > > > at org.apache.qpid.server.Main.main(Main.java:125) > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > ./qpid-server -icp ../etc/initial_config.json -props > > >> > > > > > > ../etc/qpidd.properties > > >> > > > > > > > > >> > > > > > > System Properties set to -Damqj.logging.level=info > > >> > > > > > > -DQPID_HOME=/opt/qpid-java-broker -DQPID_WORK=/ebs/ > > >> > > > > > > QPID_OPTS set to -Damqj.read_write_pool_size=32 > > >> > -DQPID_LOG_APPEND= > > >> > > > > > > Using QPID_CLASSPATH > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > /opt/qpid-java-broker/lib/*:/opt/qpid-java-broker/lib/ > > >> plugins/*:/opt/qpid-java-broker/lib/opt/* > > >> > > > > > > Info: QPID_JAVA_GC not set. Defaulting to JAVA_GC > > >> > > > > -XX:+UseConcMarkSweepGC > > >> > > > > > > -XX:+HeapDumpOnOutOfMemoryError > > >> > > > > > > Info: QPID_JAVA_MEM not set. Defaulting to JAVA_MEM > > -Xmx1024m > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > *Error: Unrecognized option: -props* > > >> > > > > > > How do i change this block from initial configuration to > use > > >> > > > Anonymous? > > >> > > > > > > > > >> > > > > > > { > > >> > > > > > > "name": "Broker", > > >> > > > > > > "storeVersion": 1, > > >> > > > > > > "modelVersion": "1.2", > > >> > > > > > > "defaultVirtualHost" : "default", > > >> > > > > > > "authenticationproviders" : [ { > > >> > > > > > > "name" : "passwordFile", > > >> > > > > > > "type" : "PlainPasswordFile", > > >> > > > > > > "path" : "${qpid.home_dir}/etc/passwd", > > >> > > > > > > "preferencesproviders" : [{ > > >> > > > > > > "name": "fileSystemPreferences", > > >> > > > > > > "type": "FileSystemPreferences", > > >> > > > > > > "path" : "${qpid.work_dir}/user.preferences.json" > > >> > > > > > > }] > > >> > > > > > > } ], > > >> > > > > > > > > >> > > > > > > On Fri, Apr 8, 2016 at 10:26 AM, Rob Godfrey < > > >> > > > rob.j.godf...@gmail.com> > > >> > > > > > > wrote: > > >> > > > > > > > > >> > > > > > >> Hi Ram, > > >> > > > > > >> > > >> > > > > > >> so one approach to this would be to define you > > authentication > > >> > > > > providers > > >> > > > > > up > > >> > > > > > >> from in your config file, so you have an an Anonymous > > >> provider > > >> > > named > > >> > > > > > >> "anonymous" and a password file provider named > > >> "passwordFile" or > > >> > > > > > >> something. Then in the port sections (AMQP, HTTP, JMX, > > etc) > > >> you > > >> > > can > > >> > > > > > >> parameterise the value they have for the name of the auth > > >> > provider > > >> > > > > they > > >> > > > > > >> are > > >> > > > > > >> using. So your initial JSON config file could contain > > >> something > > >> > > > like: > > >> > > > > > >> > > >> > > > > > >> "ports" : [ { > > >> > > > > > >> "name" : "AMQP", > > >> > > > > > >> "port" : "${qpid.amqp_port}", > > >> > > > > > >> "authenticationProvider" : > > >> > > > > "${qpid.amqp_port_authenticationProvider}", > > >> > > > > > >> > > >> > > > > > >> > > >> > > > > > >> and then you could override which provider to use at > > runtime > > >> by > > >> > > > > setting > > >> > > > > > >> the > > >> > > > > > >> property qpid.amqp_port_authenticationProvider to > > anonymous > > >> or > > >> > > > > > >> passwordFile > > >> > > > > > >> (or the name of any other authentication provider that is > > >> > defined > > >> > > in > > >> > > > > > your > > >> > > > > > >> JSON config. > > >> > > > > > >> > > >> > > > > > >> The only thing you can't do with properties is to add new > > >> > entities > > >> > > > > into > > >> > > > > > >> the > > >> > > > > > >> config - that you have to do either by editing the file, > or > > >> by > > >> > > using > > >> > > > > the > > >> > > > > > >> REST api to modify the broker configuration while it is > > >> running. > > >> > > > > > >> > > >> > > > > > >> Hope this helps, > > >> > > > > > >> Rob > > >> > > > > > >> > > >> > > > > > >> On 8 April 2016 at 18:04, rammohan ganapavarapu < > > >> > > > > > rammohanga...@gmail.com> > > >> > > > > > >> wrote: > > >> > > > > > >> > > >> > > > > > >> > Rob, > > >> > > > > > >> > > > >> > > > > > >> > Thanks for detailed explanation, i wanted to restart > with > > >> the > > >> > > > > changed > > >> > > > > > >> > properties if any for example today i have Anonymous > SASL > > >> and > > >> > > > later > > >> > > > > i > > >> > > > > > >> may > > >> > > > > > >> > want to use password file. How do i pass SASL mechanism > > as > > >> > > -prop? > > >> > > > > > >> > > > >> > > > > > >> > Thanks, > > >> > > > > > >> > Ram > > >> > > > > > >> > > > >> > > > > > >> > On Fri, Apr 8, 2016 at 2:10 AM, Rob Godfrey < > > >> > > > > rob.j.godf...@gmail.com> > > >> > > > > > >> > wrote: > > >> > > > > > >> > > > >> > > > > > >> > > Hi Ram, > > >> > > > > > >> > > > > >> > > > > > >> > > The initial config file is only used when there is no > > >> broker > > >> > > > > config > > >> > > > > > - > > >> > > > > > >> the > > >> > > > > > >> > > idea is that it is used to populate the broker config > > on > > >> > first > > >> > > > > > >> startup. > > >> > > > > > >> > > Once there is a broker config file then this is used > > >> (since > > >> > it > > >> > > > may > > >> > > > > > >> have > > >> > > > > > >> > > been updated by creating or modifying entities > through > > >> the > > >> > > > > > management > > >> > > > > > >> > > functions). The broker ships with a default initial > > >> config > > >> > > > which > > >> > > > > is > > >> > > > > > >> > > contained within its jar files, however we allow > people > > >> to > > >> > > > provide > > >> > > > > > >> there > > >> > > > > > >> > > own. Records in the config file a copied verbatim > into > > >> the > > >> > > > config > > >> > > > > > >> store > > >> > > > > > >> > - > > >> > > > > > >> > > the only difference being that ids are generated for > > each > > >> > > > entity. > > >> > > > > > The > > >> > > > > > >> > > interpolation from property names to values is done > > each > > >> > time > > >> > > > the > > >> > > > > > >> broker > > >> > > > > > >> > > reads the config. If the broker finds there is > config > > in > > >> > the > > >> > > > > store > > >> > > > > > >> path > > >> > > > > > >> > > then it completely ignores the initial config - it > does > > >> not > > >> > > > > examine > > >> > > > > > >> any > > >> > > > > > >> > > differences. > > >> > > > > > >> > > > > >> > > > > > >> > > Are you looking to start a completely fresh broker > each > > >> > time, > > >> > > or > > >> > > > > > >> merely > > >> > > > > > >> > to > > >> > > > > > >> > > be able to change certain properties (such as port > > >> numbers) > > >> > on > > >> > > > > each > > >> > > > > > >> > > restart? If you do not want to retain any changes to > > the > > >> > > broker > > >> > > > > > >> > > configuration made while the broker is actually > > running, > > >> > then > > >> > > > you > > >> > > > > > >> could > > >> > > > > > >> > use > > >> > > > > > >> > > a "memory" config store rather than a Json one. If > you > > >> want > > >> > > to > > >> > > > > > retain > > >> > > > > > >> > any > > >> > > > > > >> > > changes made through management, but desire the > ability > > >> to > > >> > > > change > > >> > > > > > >> certain > > >> > > > > > >> > > properties (like ports) on each startup, then you > don't > > >> need > > >> > > to > > >> > > > > > worry > > >> > > > > > >> > about > > >> > > > > > >> > > the fact that the initial configuration is only > loaded > > >> the > > >> > > first > > >> > > > > > time > > >> > > > > > >> - > > >> > > > > > >> > you > > >> > > > > > >> > > just need to pass in the property values you want on > > >> > startup. > > >> > > > > > >> > > > > >> > > > > > >> > > In terms of an example system properties file... The > > >> > default > > >> > > > > > >> > > initial-config.json defines the amqp port to be > > >> > > > ${qpid.amqp_port} > > >> > > > > > and > > >> > > > > > >> the > > >> > > > > > >> > > http port to run on ${qpid.http_port}, so if I > create a > > >> > > > properties > > >> > > > > > >> file > > >> > > > > > >> > > called rob.properties which contains > > >> > > > > > >> > > > > >> > > > > > >> > > qpid.http_port=8888 > > >> > > > > > >> > > qpid.amqp_port=5555 > > >> > > > > > >> > > > > >> > > > > > >> > > and then run qpid with the argument -props > > rob.properties > > >> > > then I > > >> > > > > > >> get... > > >> > > > > > >> > > > > >> > > > > > >> > > [Broker] BRK-1002 : Starting : Listening on TCP port > > 5555 > > >> > > > > > >> > > [Broker] MNG-1001 : Web Management Startup > > >> > > > > > >> > > [Broker] MNG-1002 : Starting : HTTP : Listening on > TCP > > >> port > > >> > > 8888 > > >> > > > > > >> > > > > >> > > > > > >> > > > > >> > > > > > >> > > So, when you use your initial or stored config you > just > > >> need > > >> > > to > > >> > > > > > ensure > > >> > > > > > >> > all > > >> > > > > > >> > > the variables you use in your config are set in your > > >> > > properties > > >> > > > > file > > >> > > > > > >> > (some > > >> > > > > > >> > > properties have defaults within the code if they are > > not > > >> > > > otherwise > > >> > > > > > >> set - > > >> > > > > > >> > > e.g. qpid.amqp_port will default to 5672 if it is not > > set > > >> > > > > > elsewhere). > > >> > > > > > >> > > > > >> > > > > > >> > > Hope this helps, > > >> > > > > > >> > > Rob > > >> > > > > > >> > > > > >> > > > > > >> > > On 8 April 2016 at 00:41, rammohan ganapavarapu < > > >> > > > > > >> rammohanga...@gmail.com > > >> > > > > > >> > > > > >> > > > > > >> > > wrote: > > >> > > > > > >> > > > > >> > > > > > >> > > > Rob, > > >> > > > > > >> > > > > > >> > > > > > >> > > > Thank you, one more question on -icp and -sp, so > what > > >> if i > > >> > > > have > > >> > > > > > >> updated > > >> > > > > > >> > > icp > > >> > > > > > >> > > > with some property change and restarted broker > with > > >> icp > > >> > > > (every > > >> > > > > > >> time i > > >> > > > > > >> > > > restart broker i am using initial config > > >> > > > > > >> > > > "/opt/qpid-java-broker/bin/qpid-server -icp > > >> > > > > > >> > > > /opt/qpid-java-broker/etc/config.json" not sure if > > >> its is > > >> > > > right > > >> > > > > > way > > >> > > > > > >> or > > >> > > > > > >> > > > not), does it automatically update config file in > > -sp? > > >> i > > >> > my > > >> > > > case > > >> > > > > > it > > >> > > > > > >> did > > >> > > > > > >> > > not > > >> > > > > > >> > > > updated the config file in store-path upon restart. > > >> What > > >> > > will > > >> > > > > > >> happened > > >> > > > > > >> > > if i > > >> > > > > > >> > > > have differences in initial config file that i use > to > > >> > start > > >> > > > > broker > > >> > > > > > >> and > > >> > > > > > >> > > the > > >> > > > > > >> > > > config file under store-path? > > >> > > > > > >> > > > > > >> > > > > > >> > > > Thanks, > > >> > > > > > >> > > > Ram > > >> > > > > > >> > > > > > >> > > > > > >> > > > On Thu, Apr 7, 2016 at 3:59 PM, Rob Godfrey < > > >> > > > > > >> rob.j.godf...@gmail.com> > > >> > > > > > >> > > > wrote: > > >> > > > > > >> > > > > > >> > > > > > >> > > > > This looks like a client error to me... the line > > >> which > > >> > > says: > > >> > > > > > >> > > > > > > >> > > > > > >> > > > > Client restricted itself to : PLAIN > > >> > > > > > >> > > > > > > >> > > > > > >> > > > > Out of interest what happens if you remove the > > >> > > > > > >> > &sasl_mechs='ANONYMOUS' > > >> > > > > > >> > > > from > > >> > > > > > >> > > > > your connection URL? Without any sort of > > restriction > > >> > I'd > > >> > > > > expect > > >> > > > > > >> the > > >> > > > > > >> > > > client > > >> > > > > > >> > > > > to do the right thing. > > >> > > > > > >> > > > > > > >> > > > > > >> > > > > I need to get to sleep now (1am here :-) )... > I'll > > >> have > > >> > > > deeper > > >> > > > > > >> look > > >> > > > > > >> > in > > >> > > > > > >> > > > the > > >> > > > > > >> > > > > morning. > > >> > > > > > >> > > > > > > >> > > > > > >> > > > > -- Rob > > >> > > > > > >> > > > > > > >> > > > > > >> > > > > On 7 April 2016 at 23:51, rammohan ganapavarapu < > > >> > > > > > >> > > rammohanga...@gmail.com > > >> > > > > > >> > > > > > > >> > > > > > >> > > > > wrote: > > >> > > > > > >> > > > > > > >> > > > > > >> > > > > > Rob, > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > thanks for the explanation, do you have a > sample > > >> > > > > > >> > > > > --system-properties-file? > > >> > > > > > >> > > > > > that i can take a look? > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > Also i just tried 6.0.1 but my client/app is > > >> throwing > > >> > > this > > >> > > > > > >> error, i > > >> > > > > > >> > > am > > >> > > > > > >> > > > > not > > >> > > > > > >> > > > > > a developer, i am ops guy and i dont want to > > change > > >> > the > > >> > > > > > existing > > >> > > > > > >> > code > > >> > > > > > >> > > > but > > >> > > > > > >> > > > > > wanted to make java qpid work. This is the > error > > i > > >> am > > >> > > > > getting > > >> > > > > > >> with > > >> > > > > > >> > > > > 6.0.1v.. > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > 2016-04-07 22:32:36,726 > > >> > > > > > >> > > > > > > > >> > > QPIDConnectionManager-80478ba7-b31e-483a-823e-f726104ac1db > > >> > > > > > ERROR > > >> > > > > > >> > > > > > S.QUEUECLIENTSERVICE - > > >> > ConnectionImpl.openConnection() : > > >> > > > > Error > > >> > > > > > >> > > > connecting > > >> > > > > > >> > > > > > to Connection : 0 Host = qphost01 > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > >> > > > > > >> > > > >> > > > > > >> > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > url=amqp://null:********@qphost011460067563391/? > > >> brokerlist='tcp://localhost:5672?connecttimeout='5000'& > > >> sasl_mechs='ANONYMOUS'' > > >> > > > > > >> > > > > > error Unknown virtualhost '' username=null > > >> > > > > > >> > > > > > 2016-04-07 22:32:36,731 > > >> > > > > > >> > > > > > > > >> > > QPIDConnectionManager-80478ba7-b31e-483a-823e-f726104ac1db > > >> > > > > > ERROR > > >> > > > > > >> > > > > > S.QUEUECLIENTSERVICE - > > >> > ConnectionImpl.openConnection() : > > >> > > > > Error > > >> > > > > > >> > > > connecting > > >> > > > > > >> > > > > > to Connection : 0 Host = qphost01 > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > >> > > > > > >> > > > >> > > > > > >> > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > url=amqp://null:********@qphost011460067563391/? > > >> brokerlist='tcp://localhost:5672?connecttimeout='5000'& > > >> sasl_mechs='ANONYMOUS'' > > >> > > > > > >> > > > > > error Client and broker have no SASL mechanisms > > in > > >> > > common. > > >> > > > > > >> Broker > > >> > > > > > >> > > > allows > > >> > > > > > >> > > > > : > > >> > > > > > >> > > > > > ANONYMOUS Client has : [EXTERNAL, GSSAPI, > > >> > > CRAM-MD5-HASHED, > > >> > > > > > >> > CRAM-MD5, > > >> > > > > > >> > > > > > AMQPLAIN, PLAIN, ANONYMOUS] Client restricted > > >> itself > > >> > to > > >> > > : > > >> > > > > > PLAIN > > >> > > > > > >> > > > > > username=guest > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > And here is my sasl mechanism. > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > curl -s 0:10001/service/sasl > > >> > > > > > >> > > > > > { > > >> > > > > > >> > > > > > "user" : "ANONYMOUS", > > >> > > > > > >> > > > > > "mechanisms" : [ "ANONYMOUS" ] > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > Same SASL with 0.28 works fine with my app but > > >> 6.0.1 > > >> > is > > >> > > > not > > >> > > > > > >> > working. > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > Thanks, > > >> > > > > > >> > > > > > Ram > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > On Thu, Apr 7, 2016 at 3:39 PM, Rob Godfrey < > > >> > > > > > >> > rob.j.godf...@gmail.com > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > wrote: > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > > On 7 April 2016 at 23:16, rammohan > > ganapavarapu < > > >> > > > > > >> > > > > rammohanga...@gmail.com > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > wrote: > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > > Rob, > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > Does v6.0.1 support Anonymous or no > > >> > authentication? > > >> > > > last > > >> > > > > > >> time > > >> > > > > > >> > > when > > >> > > > > > >> > > > i > > >> > > > > > >> > > > > > try > > >> > > > > > >> > > > > > > to > > >> > > > > > >> > > > > > > > use .32 it was not working with Anonymous. > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > Yes, Anonymous is supported. Which AMQP > > protocol > > >> > are > > >> > > > you > > >> > > > > > >> using > > >> > > > > > >> > > > (0-9-1, > > >> > > > > > >> > > > > > > 0-10, or 1.0)... I would expect that > Anonymous > > >> > should > > >> > > > work > > >> > > > > > on > > >> > > > > > >> > 0.32 > > >> > > > > > >> > > > > > however > > >> > > > > > >> > > > > > > I think in 0.32 the "no authentication layer > at > > >> all" > > >> > > > > option > > >> > > > > > >> for > > >> > > > > > >> > > AMQP > > >> > > > > > >> > > > > 1.0 > > >> > > > > > >> > > > > > > probably didn't work (this is different to an > > >> > > > > authentication > > >> > > > > > >> > layer > > >> > > > > > >> > > > > which > > >> > > > > > >> > > > > > > allows anonymous). > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > Sorry i was not clear in my previous > email, i > > >> was > > >> > > > taking > > >> > > > > > >> about > > >> > > > > > >> > > > > > properties > > >> > > > > > >> > > > > > > > file not broker storage format, the use > case > > is > > >> > if i > > >> > > > > > wanted > > >> > > > > > >> to > > >> > > > > > >> > > > > override > > >> > > > > > >> > > > > > > > some of these properties and i have my own > > >> custom > > >> > > > > > >> tool/script > > >> > > > > > >> > > that > > >> > > > > > >> > > > > > goes > > >> > > > > > >> > > > > > > > through the properties files and replace > with > > >> the > > >> > > > > > override i > > >> > > > > > >> > > > defined, > > >> > > > > > >> > > > > > so > > >> > > > > > >> > > > > > > i > > >> > > > > > >> > > > > > > > want to use the same tool/script for qpid > > >> config > > >> > as > > >> > > > > well. > > >> > > > > > My > > >> > > > > > >> > tool > > >> > > > > > >> > > > > only > > >> > > > > > >> > > > > > > > support key:value but if we have json array > > it > > >> > wont > > >> > > > > work. > > >> > > > > > So > > >> > > > > > >> > if i > > >> > > > > > >> > > > > want > > >> > > > > > >> > > > > > to > > >> > > > > > >> > > > > > > > pass overrides as "-prop" command line > > >> arguments > > >> > > what > > >> > > > > are > > >> > > > > > >> the > > >> > > > > > >> > > > > > properties > > >> > > > > > >> > > > > > > > that java qpid support as command line? > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > Below if my config, is it possible to pass > > all > > >> > these > > >> > > > as > > >> > > > > > >> command > > >> > > > > > >> > > > line > > >> > > > > > >> > > > > > > > arguments? > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > { > > >> > > > > > >> > > > > > > > "authenticationproviders" : [ { > > >> > > > > > >> > > > > > > > "id" : "7050933f-3485-4866-95d2- > > >> 1f1b258ea3ac", > > >> > > > > > >> > > > > > > > "name" : "Anonymous", > > >> > > > > > >> > > > > > > > "type" : "Anonymous" > > >> > > > > > >> > > > > > > > } ], > > >> > > > > > >> > > > > > > > "defaultVirtualHost" : "default", > > >> > > > > > >> > > > > > > > "id" : "c433a66c-e6dc-4c48-be01- > > >> 268295f580bc", > > >> > > > > > >> > > > > > > > "modelVersion" : "1.3", > > >> > > > > > >> > > > > > > > "name" : "Broker", > > >> > > > > > >> > > > > > > > "plugins" : [ { > > >> > > > > > >> > > > > > > > "id" : "58889cb7-9b9b-4866-bab2- > > >> 4cfd63266dbf", > > >> > > > > > >> > > > > > > > "name" : "httpManagement", > > >> > > > > > >> > > > > > > > "pluginType" : "MANAGEMENT-HTTP" > > >> > > > > > >> > > > > > > > }, { > > >> > > > > > >> > > > > > > > "id" : "67282f5e-ebab-4341-9ff5- > > >> 27a58fd2df89", > > >> > > > > > >> > > > > > > > "name" : "jmxManagement", > > >> > > > > > >> > > > > > > > "pluginType" : "MANAGEMENT-JMX" > > >> > > > > > >> > > > > > > > } ], > > >> > > > > > >> > > > > > > > "ports" : [ { > > >> > > > > > >> > > > > > > > "authenticationProvider" : "Anonymous", > > >> > > > > > >> > > > > > > > "id" : "99e13356-080a-4abe-852e- > > >> 8c452149cdae", > > >> > > > > > >> > > > > > > > "name" : "JMX_CONNECTOR", > > >> > > > > > >> > > > > > > > "port" : "9099", > > >> > > > > > >> > > > > > > > "protocols" : [ "JMX_RMI" ] > > >> > > > > > >> > > > > > > > }, { > > >> > > > > > >> > > > > > > > "authenticationProvider" : "Anonymous", > > >> > > > > > >> > > > > > > > "id" : "12813407-62ae-429f-8bee- > > >> 75802f3b6553", > > >> > > > > > >> > > > > > > > "name" : "RMI_REGISTRY", > > >> > > > > > >> > > > > > > > "port" : "8999", > > >> > > > > > >> > > > > > > > "protocols" : [ "RMI" ] > > >> > > > > > >> > > > > > > > }, { > > >> > > > > > >> > > > > > > > "authenticationProvider" : "Anonymous", > > >> > > > > > >> > > > > > > > "id" : "3b107675-edd7-40a3-86c2- > > >> 3113b46157f9", > > >> > > > > > >> > > > > > > > "name" : "AMQP", > > >> > > > > > >> > > > > > > > "port" : "5672" > > >> > > > > > >> > > > > > > > }, { > > >> > > > > > >> > > > > > > > "authenticationProvider" : "Anonymous", > > >> > > > > > >> > > > > > > > "id" : "6dff5ecf-1a4b-46ad-b93d- > > >> f2606b5e4f6e", > > >> > > > > > >> > > > > > > > "name" : "HTTP", > > >> > > > > > >> > > > > > > > "port" : "10001", > > >> > > > > > >> > > > > > > > "protocols" : [ "HTTP" ] > > >> > > > > > >> > > > > > > > } ], > > >> > > > > > >> > > > > > > > "storeVersion" : 1, > > >> > > > > > >> > > > > > > > "virtualhosts" : [ { > > >> > > > > > >> > > > > > > > "createdTime" : 1439482250329, > > >> > > > > > >> > > > > > > > "id" : "eef20ba0-33d3-4b37-93a7- > > >> fe2b34e54503", > > >> > > > > > >> > > > > > > > "name" : "default", > > >> > > > > > >> > > > > > > > "storePath" : > "/ebs//derbystore/default", > > >> > > > > > >> > > > > > > > "storeType" : "DERBY", > > >> > > > > > >> > > > > > > > "type" : "STANDARD" > > >> > > > > > >> > > > > > > > } ] > > >> > > > > > >> > > > > > > > } > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > In 6.0 you can replace any value in the JSON > > >> with a > > >> > > > > > reference > > >> > > > > > >> to > > >> > > > > > >> > a > > >> > > > > > >> > > > > > > property, for example > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > "name" : "${myPortName}", > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > this will then interpolate the value from the > > >> > > property, > > >> > > > so > > >> > > > > > if > > >> > > > > > >> you > > >> > > > > > >> > > set > > >> > > > > > >> > > > > the > > >> > > > > > >> > > > > > > property myPortName to "RobsPort" that will > be > > >> the > > >> > > value > > >> > > > > > used. > > >> > > > > > >> > > Type > > >> > > > > > >> > > > > > > conversions will be performed, so if the > > required > > >> > > value > > >> > > > is > > >> > > > > > an > > >> > > > > > >> > > integer > > >> > > > > > >> > > > > it > > >> > > > > > >> > > > > > > will convert to an integer. If the value > > >> required > > >> > is > > >> > > a > > >> > > > > list > > >> > > > > > >> then > > >> > > > > > >> > > you > > >> > > > > > >> > > > > can > > >> > > > > > >> > > > > > > use a String representation of a list in Json > > >> > format. > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > You can set the properties individually, or > you > > >> can > > >> > > pass > > >> > > > > in > > >> > > > > > a > > >> > > > > > >> > > > > properties > > >> > > > > > >> > > > > > > file using -props or --system-properties-file > > >> (so if > > >> > > you > > >> > > > > > have > > >> > > > > > >> a > > >> > > > > > >> > > > > > properties > > >> > > > > > >> > > > > > > file already maybe you can just pass this > in). > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > > One more question or may be clarification > is, > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > *-sp (--store-path) is the path of config > > file > > >> > that > > >> > > > will > > >> > > > > > >> > > generated > > >> > > > > > >> > > > by > > >> > > > > > >> > > > > > > qpidd > > >> > > > > > >> > > > > > > > from the initial config right? what is the > > use > > >> of > > >> > > > > > >> store-path?* > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > That is correct. Some people just like to > have > > >> > config > > >> > > > > files > > >> > > > > > >> in a > > >> > > > > > >> > > > > > > non-default location :-) > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > Hope this helps, > > >> > > > > > >> > > > > > > Rob > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > > *Thanks,* > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > *Ram* > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > On Thu, Apr 7, 2016 at 3:02 PM, Rob > Godfrey < > > >> > > > > > >> > > > rob.j.godf...@gmail.com > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > > > wrote: > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > > Firstly, 0.28 is quite old now - I would > > >> > recommend > > >> > > > > > >> updating > > >> > > > > > >> > to > > >> > > > > > >> > > > > v6.0.1 > > >> > > > > > >> > > > > > > if > > >> > > > > > >> > > > > > > > > you can. > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > > Secondly I'm not sure I understand your > > >> > question - > > >> > > > are > > >> > > > > > you > > >> > > > > > >> > > asking > > >> > > > > > >> > > > > > about > > >> > > > > > >> > > > > > > > > overriding particular properties, or the > > >> storage > > >> > > > > format > > >> > > > > > >> for > > >> > > > > > >> > the > > >> > > > > > >> > > > > > broker > > >> > > > > > >> > > > > > > > > configuration - these are two different > > >> things. > > >> > > In > > >> > > > > > terms > > >> > > > > > >> of > > >> > > > > > >> > > > > > > properties / > > >> > > > > > >> > > > > > > > > context overrides this can be specified > > >> using a > > >> > > > > > properties > > >> > > > > > >> > file > > >> > > > > > >> > > > (at > > >> > > > > > >> > > > > > > least > > >> > > > > > >> > > > > > > > > in v6 - I forget exactly how it worked on > > >> 0.28). > > >> > > In > > >> > > > > > >> terms of > > >> > > > > > >> > > the > > >> > > > > > >> > > > > > > > > configuration, JSON is currently the only > > >> text > > >> > > based > > >> > > > > > >> format > > >> > > > > > >> > > > > > supported. > > >> > > > > > >> > > > > > > > You > > >> > > > > > >> > > > > > > > > can use a database for the broker config > > >> > storage, > > >> > > > > there > > >> > > > > > >> are > > >> > > > > > >> > > built > > >> > > > > > >> > > > > in > > >> > > > > > >> > > > > > > > > mechanisms to support Derby, BDB, and > > generic > > >> > JDBC > > >> > > > > > config > > >> > > > > > >> > > stores. > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > > May I ask what advantage you would get by > > >> using > > >> > > YAML > > >> > > > > or > > >> > > > > > >> > > > properties > > >> > > > > > >> > > > > > > files > > >> > > > > > >> > > > > > > > > instead of JSON? > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > > -- Rob > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > > On 7 April 2016 at 22:43, rammohan > > >> ganapavarapu > > >> > < > > >> > > > > > >> > > > > > > rammohanga...@gmail.com > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > > wrote: > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > > > Hi, > > >> > > > > > >> > > > > > > > > > > > >> > > > > > >> > > > > > > > > > Is there any way to start > qpid-java-0.28 > > >> > broker > > >> > > > > using > > >> > > > > > >> > > > .properties > > >> > > > > > >> > > > > > > file > > >> > > > > > >> > > > > > > > or > > >> > > > > > >> > > > > > > > > > .xml or .yaml file instead of .json > file? > > >> or > > >> > > what > > >> > > > > are > > >> > > > > > >> the > > >> > > > > > >> > > other > > >> > > > > > >> > > > > > ways > > >> > > > > > >> > > > > > > to > > >> > > > > > >> > > > > > > > > > pass override properties instead of > JSON > > >> > config > > >> > > > > file? > > >> > > > > > >> > > > > > > > > > > > >> > > > > > >> > > > > > > > > > > > >> > > > > > >> > > > > > > > > > Thanks, > > >> > > > > > >> > > > > > > > > > Ram > > >> > > > > > >> > > > > > > > > > > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > >> > > > > > >> > > > >> > > > > > >> > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > > > > > > > >
