Hi Ram, This page from the broker docs covers most aspects of memory configuration:
https://qpid.apache.org/releases/qpid-java-6.0.4/java-broker/book/Java-Broker-Runtime-Memory.html Hope this helps, Rob On 26 August 2016 at 20:49, rammohan ganapavarapu <rammohanga...@gmail.com> wrote: > Yes, i changed it to use Anonymous and its working now. Now i need some > documents or suggestions on how to configure Mem settings and flow to disk > settings in config.json > > Thanks, > Ram > > On Fri, Aug 26, 2016 at 12:16 PM, Rob Godfrey <rob.j.godf...@gmail.com> > wrote: > > > Hi Ram, > > > > I assume that you have configured port 5672 to use the Plain auth > provider > > (each port can only be associated with a single auth provider - you can > add > > other ports which use the a different auth provider). The issue here is > > that by default the Java Broker will not allow PLAIN SASL over a non-TLS > > connection. You can override this by changing the "secureOnlyMechanisms" > > attribute of the (password) auth provider. Setting this value to the > empty > > list within the password auth provider section > > > > "secureOnlyMechanisms" : [ ], > > > > in your json config file, will mean than PLAIN will be offered as a > > mechanism. > > > > Alternatively you can change your port configuration to use you anonymous > > authentication provider, rather than the password provider. > > > > Hope this helps, > > Rob > > > > > > On 26 August 2016 at 19:27, rammohan ganapavarapu < > rammohanga...@gmail.com > > > > > wrote: > > > > > Rob, > > > > > > I have followed as you said and created a clean slate v6 broker and > from > > UI > > > created two auth provides palin and anonimous but when i make this api > > call > > > i am getting different sasl list > > > > > > curl -s http://localhost:10001/service/sasl > > > { > > > "mechanisms" : [ "CRAM-MD5", "SCRAM-SHA-1", "SCRAM-SHA-256" ] > > > > > > and as you told you before my client is throwing this error, so client > > has > > > a logic to try Plain with user guest first if it doesn't work then try > > > anonymous. Since broker doesn't have any of those in its sasl list may > be > > > its not able to connect? > > > > > > > > > url=amqp://guest:********@/?brokerlist='tcp://host:5672? > > > connecttimeout='5000'&sasl_mechs='PLAIN'' > > > Not Connected. error Client and broker have no SASL mechanisms in > common. > > > Broker allows : CRAM-MD5 SCRAM-SHA-1 SCRAM-SHA-256 Client has : > > [EXTERNAL, > > > GSSAPI, SCRAM-SHA-256, SCRAM-SHA-1, CRAM-MD5-HASHED, CRAM-MD5, PLAIN, > > > AMQPLAIN, ANONYMOUS, XOAUTH2] Client restricted itself to : PLAIN > > > username=guest > > > > > > > > > and > > > > > > url=amqp://guest:********@/?brokerlist='tcp://host:5672? > > > connecttimeout='5000'&sasl_mechs='ANONYMOUS'' > > > Not Connected. error Client and broker have no SASL mechanisms in > common. > > > Broker allows : CRAM-MD5 SCRAM-SHA-1 SCRAM-SHA-256 Client has : > > [EXTERNAL, > > > GSSAPI, SCRAM-SHA-256, SCRAM-SHA-1, CRAM-MD5-HASHED, CRAM-MD5, PLAIN, > > > AMQPLAIN, ANONYMOUS, XOAUTH2] Client restricted itself to : ANONYMOUS > > > username=null > > > > > > Thanks, > > > Ram > > > > > > On Tue, Apr 19, 2016 at 10:10 AM, rammohan ganapavarapu < > > > rammohanga...@gmail.com> wrote: > > > > > > > Hi Rob, > > > > > > > > I did not get chance to try v6, i will try and let you know. > > > > > > > > Ram > > > > > > > > On Tue, Apr 19, 2016 at 12:56 AM, Rob Godfrey < > rob.j.godf...@gmail.com > > > > > > > wrote: > > > > > > > >> Hi Ram, > > > >> > > > >> have you got v6 working now? The memory settings for the broker > > depend > > > >> upon which version you are using. For version 6 there is a > > > comprehensive > > > >> discussion on memory allocation settings in the manual: > > > >> https://qpid.apache.org/releases/qpid-java-6.0.1/java- > > > >> broker/book/Java-Broker-Runtime-Memory.html > > > >> > > > >> Versions prior to v6 use memory (and threads) very differently. > > > >> > > > >> Hope this helps, > > > >> Rob > > > >> > > > >> On 18 April 2016 at 22:09, rammohan ganapavarapu < > > > rammohanga...@gmail.com > > > >> > > > > >> wrote: > > > >> > > > >> > Rob, > > > >> > > > > >> > One more question in the same context, what are the recommended > JVM > > > >> > settings for java broker? i am using default "-Xmx1024m" its > working > > > >> fine > > > >> > but i wanted to follow the best practices. Please advice. > > > >> > > > > >> > > > > >> > Thanks, > > > >> > Ram > > > >> > > > > >> > On Wed, Apr 13, 2016 at 6:46 AM, Rob Godfrey < > > rob.j.godf...@gmail.com > > > > > > > >> > wrote: > > > >> > > > > >> > > Hi Ram, > > > >> > > > > > >> > > Apologies, I've been having a few issues with my internet > > provider. > > > >> > > > > > >> > > Can you try setting up an entirely clean install of Qpid 6.0.1 > and > > > >> > > configuring (through the UI) that to use ANONYMOUS, and then > check > > > >> your > > > >> > > client can connect. > > > >> > > > > > >> > > This is what I did, and it works fine for me. > > > >> > > > > > >> > > For the rest of your requirements (like setting the log file > > > location, > > > >> > > etc.) you really want to be using version 6 or later. > > > >> > > > > > >> > > Cheers, > > > >> > > Rob > > > >> > > > > > >> > > On 11 April 2016 at 22:44, rammohan ganapavarapu < > > > >> > rammohanga...@gmail.com> > > > >> > > wrote: > > > >> > > > > > >> > > > Rob, > > > >> > > > > > > >> > > > I have tried with virtualhost config that you have provided > but > > i > > > am > > > >> > > still > > > >> > > > getting connection error. I would like to make it work with > 6.0* > > > >> > version > > > >> > > > but at this point i need 0.28 version to make working, so if > you > > > can > > > >> > help > > > >> > > > me to configure log location in 0.28 that would unblock me for > > > now. > > > >> > > > > > > >> > > > Thanks, > > > >> > > > Ram > > > >> > > > > > > >> > > > 2016-04-11 21:40:01,845 DelayedTaskExecutor-1 ERROR > > > >> > > S.QUEUECLIENTSERVICE - > > > >> > > > ConnectionImpl.openConnection() : Error connecting to > > Connection > > > : > > > >> 0 > > > >> > > Host = > > > >> > > > localhost > > > >> > > > > > > >> > > > > > > >> > > > > > >> > url=amqp://guest:********@/?brokerlist='tcp://localhost: > > > >> 5672?connecttimeout='5000'&sasl_mechs='PLAIN'' > > > >> > > > Not Connected. error Client and broker have no SASL mechanisms > > in > > > >> > common. > > > >> > > > Broker allows : ANONYMOUS Client has : [EXTERNAL, GSSAPI, > > > >> > > CRAM-MD5-HASHED, > > > >> > > > CRAM-MD5, AMQPLAIN, PLAIN, ANONYMOUS] Client restricted itself > > to > > > : > > > >> > PLAIN > > > >> > > > username=guest > > > >> > > > > > > >> > > > 2016-04-11 21:40:01,846 DelayedTaskExecutor-1 ERROR > > > >> > > S.QUEUECLIENTSERVICE - > > > >> > > > ConnectionImpl.verifyQueueAndExchange() : Error binding queue > > > null > > > >> > > > 2016-04-11 21:40:01,846 DelayedTaskExecutor-1 ERROR > > > >> > > c.a.a.q.QueueBuilder - > > > >> > > > QueueBuilder$1.execute() : Attempt to create exchange/queue > > > >> > > > ax-ex-mxgroup001/ax-q-mxgroup001 failed. > > > >> > > > > > > >> > > > 2016-04-11 21:40:01,861 DelayedTaskExecutor-1 INFO > > > >> > > c.a.a.q.QueueBuilder - > > > >> > > > QueueBuilder$1.execute() : Creating exchange/queue > > > >> > > > ax-ex-mxgroup001-dl/ax-q-mxgroup001-dl > > > >> > > > > > > >> > > > 2016-04-11 21:40:01,867 DelayedTaskExecutor-1 ERROR > > > >> > > S.QUEUECLIENTSERVICE - > > > >> > > > ConnectionImpl.openConnection() : Error connecting to > > Connection > > > : > > > >> 0 > > > >> > > Host = > > > >> > > > localhost > > > >> > > > > > > >> > > > > > > >> > > > > > >> > url=amqp://guest:********@/?brokerlist='tcp://localhost: > > > >> 5672?connecttimeout='5000'&sasl_mechs='ANONYMOUS'' > > > >> > > > Not Connected. error Unknown virtualhost '' username=null > > > >> > > > > > > >> > > > 2016-04-11 21:40:01,870 DelayedTaskExecutor-1 ERROR > > > >> > > S.QUEUECLIENTSERVICE - > > > >> > > > ConnectionImpl.openConnection() : Error connecting to > > Connection > > > : > > > >> 0 > > > >> > > Host = > > > >> > > > localhost > > > >> > > > > > > >> > > > > > > >> > > > > > >> > url=amqp://guest:********@/?brokerlist='tcp://localhost: > > > >> 5672?connecttimeout='5000'&sasl_mechs='PLAIN'' > > > >> > > > Not Connected. error Client and broker have no SASL mechanisms > > in > > > >> > common. > > > >> > > > Broker allows : ANONYMOUS Client has : [EXTERNAL, GSSAPI, > > > >> > > CRAM-MD5-HASHED, > > > >> > > > CRAM-MD5, AMQPLAIN, PLAIN, ANONYMOUS] Client restricted itself > > to > > > : > > > >> > PLAIN > > > >> > > > username=guest > > > >> > > > > > > >> > > > 2016-04-11 21:40:01,870 DelayedTaskExecutor-1 ERROR > > > >> > > S.QUEUECLIENTSERVICE - > > > >> > > > ConnectionImpl.verifyQueueAndExchange() : Error binding queue > > > null > > > >> > > > > > > >> > > > On Sun, Apr 10, 2016 at 3:11 PM, Rob Godfrey < > > > >> rob.j.godf...@gmail.com> > > > >> > > > wrote: > > > >> > > > > > > >> > > > > Hi Ram, > > > >> > > > > > > > >> > > > > in 6.0.x the log file location can be changed directly > through > > > the > > > >> > > config > > > >> > > > > json - I really think we should first concentrate on getting > > > that > > > >> > > working > > > >> > > > > for you. > > > >> > > > > > > > >> > > > > I've verified that using the 6.0.x client and broker with a > > URL > > > >> > similar > > > >> > > > to > > > >> > > > > the one in your log file works for ANONYMOUS. > > > >> > > > > > > > >> > > > > Looking at your error output again I notice that there seem > > > >> actually > > > >> > to > > > >> > > > be > > > >> > > > > two connection attempts, the first ends with: > > > >> > > > > > > > >> > > > > error Unknown virtualhost '' username=null > > > >> > > > > > > > >> > > > > Then we see the second failure with the "PLAIN" error. That > > > first > > > >> > > error > > > >> > > > > indicate that ANONYMOUS log in was actually successful, > > however > > > >> you > > > >> > > were > > > >> > > > > the running into the fact that no virtualhost is mapped to > the > > > >> empty > > > >> > > > > string. That suggests to me that you don't have any > > > >> > virtualhostaliases > > > >> > > > > defined in your (AMQP) port config. I'd suggest that it > would > > > make > > > >> > > sense > > > >> > > > to > > > >> > > > > craft an initial config based on the default initial config > > for > > > >> 6.0.x > > > >> > > > which > > > >> > > > > will include a virtualhostaliases section in the AMQP port > > which > > > >> > looks > > > >> > > > > like: > > > >> > > > > > > > >> > > > > "virtualhostaliases" : [ { > > > >> > > > > "name" : "nameAlias", > > > >> > > > > "type" : "nameAlias" > > > >> > > > > }, { > > > >> > > > > "name" : "defaultAlias", > > > >> > > > > "type" : "defaultAlias" > > > >> > > > > }, { > > > >> > > > > "name" : "hostnameAlias", > > > >> > > > > "type" : "hostnameAlias" > > > >> > > > > } ] > > > >> > > > > > > > >> > > > > > > > >> > > > > Let me know if this works for you, then we can look at some > of > > > >> your > > > >> > > other > > > >> > > > > questions. > > > >> > > > > > > > >> > > > > -- Rob > > > >> > > > > > > > >> > > > > > > > >> > > > > On 9 April 2016 at 00:31, rammohan ganapavarapu < > > > >> > > rammohanga...@gmail.com > > > >> > > > > > > > >> > > > > wrote: > > > >> > > > > > > > >> > > > > > Rob, > > > >> > > > > > > > > >> > > > > > Also how do i pass logfile location as -prop as > commandline > > > >> > argument? > > > >> > > > or > > > >> > > > > > how do i change default log file location i know we can > > update > > > >> > > > log4j.xml > > > >> > > > > > but is there any other way? > > > >> > > > > > > > > >> > > > > > Ram > > > >> > > > > > > > > >> > > > > > On Fri, Apr 8, 2016 at 11:48 AM, rammohan ganapavarapu < > > > >> > > > > > rammohanga...@gmail.com> wrote: > > > >> > > > > > > > > >> > > > > > > Rob, > > > >> > > > > > > > > > >> > > > > > > I tried passing properties file as argument but it didnt > > > like > > > >> it. > > > >> > > > Does > > > >> > > > > it > > > >> > > > > > > support in 0.28v? > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > ./qpid-server -icp ../etc/initial_config.json -prop > > > >> > > > > > ../etc/qpidd.properties > > > >> > > > > > > > > > >> > > > > > > System Properties set to -Damqj.logging.level=info > > > >> > > > > > > -DQPID_HOME=/opt/qpid-java-broker -DQPID_WORK=/ebs/ > > > >> > > > > > > QPID_OPTS set to -Damqj.read_write_pool_size=32 > > > >> > -DQPID_LOG_APPEND= > > > >> > > > > > > Using QPID_CLASSPATH > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > /opt/qpid-java-broker/lib/*:/opt/qpid-java-broker/lib/ > > > >> plugins/*:/opt/qpid-java-broker/lib/opt/* > > > >> > > > > > > Info: QPID_JAVA_GC not set. Defaulting to JAVA_GC > > > >> > > > > -XX:+UseConcMarkSweepGC > > > >> > > > > > > -XX:+HeapDumpOnOutOfMemoryError > > > >> > > > > > > Info: QPID_JAVA_MEM not set. Defaulting to JAVA_MEM > > > -Xmx1024m > > > >> > > > > > > Exception during startup: java.lang. > > > IllegalArgumentException: > > > >> > > > > > > Configuration property argument is not of the format > > > >> name=value: > > > >> > > > > > > ../etc/qpidd.properties > > > >> > > > > > > java.lang.IllegalArgumentException: Configuration > > property > > > >> > argument > > > >> > > > is > > > >> > > > > > not > > > >> > > > > > > of the format name=value: ../etc/qpidd.properties > > > >> > > > > > > at org.apache.qpid.server.Main. > execute(Main.java:226) > > > >> > > > > > > at org.apache.qpid.server.Main.< > init>(Main.java:134) > > > >> > > > > > > at org.apache.qpid.server.Main.main(Main.java:125) > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > ./qpid-server -icp ../etc/initial_config.json -props > > > >> > > > > > > ../etc/qpidd.properties > > > >> > > > > > > > > > >> > > > > > > System Properties set to -Damqj.logging.level=info > > > >> > > > > > > -DQPID_HOME=/opt/qpid-java-broker -DQPID_WORK=/ebs/ > > > >> > > > > > > QPID_OPTS set to -Damqj.read_write_pool_size=32 > > > >> > -DQPID_LOG_APPEND= > > > >> > > > > > > Using QPID_CLASSPATH > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > /opt/qpid-java-broker/lib/*:/opt/qpid-java-broker/lib/ > > > >> plugins/*:/opt/qpid-java-broker/lib/opt/* > > > >> > > > > > > Info: QPID_JAVA_GC not set. Defaulting to JAVA_GC > > > >> > > > > -XX:+UseConcMarkSweepGC > > > >> > > > > > > -XX:+HeapDumpOnOutOfMemoryError > > > >> > > > > > > Info: QPID_JAVA_MEM not set. Defaulting to JAVA_MEM > > > -Xmx1024m > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > *Error: Unrecognized option: -props* > > > >> > > > > > > How do i change this block from initial configuration to > > use > > > >> > > > Anonymous? > > > >> > > > > > > > > > >> > > > > > > { > > > >> > > > > > > "name": "Broker", > > > >> > > > > > > "storeVersion": 1, > > > >> > > > > > > "modelVersion": "1.2", > > > >> > > > > > > "defaultVirtualHost" : "default", > > > >> > > > > > > "authenticationproviders" : [ { > > > >> > > > > > > "name" : "passwordFile", > > > >> > > > > > > "type" : "PlainPasswordFile", > > > >> > > > > > > "path" : "${qpid.home_dir}/etc/passwd", > > > >> > > > > > > "preferencesproviders" : [{ > > > >> > > > > > > "name": "fileSystemPreferences", > > > >> > > > > > > "type": "FileSystemPreferences", > > > >> > > > > > > "path" : "${qpid.work_dir}/user. > preferences.json" > > > >> > > > > > > }] > > > >> > > > > > > } ], > > > >> > > > > > > > > > >> > > > > > > On Fri, Apr 8, 2016 at 10:26 AM, Rob Godfrey < > > > >> > > > rob.j.godf...@gmail.com> > > > >> > > > > > > wrote: > > > >> > > > > > > > > > >> > > > > > >> Hi Ram, > > > >> > > > > > >> > > > >> > > > > > >> so one approach to this would be to define you > > > authentication > > > >> > > > > providers > > > >> > > > > > up > > > >> > > > > > >> from in your config file, so you have an an Anonymous > > > >> provider > > > >> > > named > > > >> > > > > > >> "anonymous" and a password file provider named > > > >> "passwordFile" or > > > >> > > > > > >> something. Then in the port sections (AMQP, HTTP, JMX, > > > etc) > > > >> you > > > >> > > can > > > >> > > > > > >> parameterise the value they have for the name of the > auth > > > >> > provider > > > >> > > > > they > > > >> > > > > > >> are > > > >> > > > > > >> using. So your initial JSON config file could contain > > > >> something > > > >> > > > like: > > > >> > > > > > >> > > > >> > > > > > >> "ports" : [ { > > > >> > > > > > >> "name" : "AMQP", > > > >> > > > > > >> "port" : "${qpid.amqp_port}", > > > >> > > > > > >> "authenticationProvider" : > > > >> > > > > "${qpid.amqp_port_authenticationProvider}", > > > >> > > > > > >> > > > >> > > > > > >> > > > >> > > > > > >> and then you could override which provider to use at > > > runtime > > > >> by > > > >> > > > > setting > > > >> > > > > > >> the > > > >> > > > > > >> property qpid.amqp_port_authenticationProvider to > > > anonymous > > > >> or > > > >> > > > > > >> passwordFile > > > >> > > > > > >> (or the name of any other authentication provider that > is > > > >> > defined > > > >> > > in > > > >> > > > > > your > > > >> > > > > > >> JSON config. > > > >> > > > > > >> > > > >> > > > > > >> The only thing you can't do with properties is to add > new > > > >> > entities > > > >> > > > > into > > > >> > > > > > >> the > > > >> > > > > > >> config - that you have to do either by editing the > file, > > or > > > >> by > > > >> > > using > > > >> > > > > the > > > >> > > > > > >> REST api to modify the broker configuration while it is > > > >> running. > > > >> > > > > > >> > > > >> > > > > > >> Hope this helps, > > > >> > > > > > >> Rob > > > >> > > > > > >> > > > >> > > > > > >> On 8 April 2016 at 18:04, rammohan ganapavarapu < > > > >> > > > > > rammohanga...@gmail.com> > > > >> > > > > > >> wrote: > > > >> > > > > > >> > > > >> > > > > > >> > Rob, > > > >> > > > > > >> > > > > >> > > > > > >> > Thanks for detailed explanation, i wanted to restart > > with > > > >> the > > > >> > > > > changed > > > >> > > > > > >> > properties if any for example today i have Anonymous > > SASL > > > >> and > > > >> > > > later > > > >> > > > > i > > > >> > > > > > >> may > > > >> > > > > > >> > want to use password file. How do i pass SASL > mechanism > > > as > > > >> > > -prop? > > > >> > > > > > >> > > > > >> > > > > > >> > Thanks, > > > >> > > > > > >> > Ram > > > >> > > > > > >> > > > > >> > > > > > >> > On Fri, Apr 8, 2016 at 2:10 AM, Rob Godfrey < > > > >> > > > > rob.j.godf...@gmail.com> > > > >> > > > > > >> > wrote: > > > >> > > > > > >> > > > > >> > > > > > >> > > Hi Ram, > > > >> > > > > > >> > > > > > >> > > > > > >> > > The initial config file is only used when there is > no > > > >> broker > > > >> > > > > config > > > >> > > > > > - > > > >> > > > > > >> the > > > >> > > > > > >> > > idea is that it is used to populate the broker > config > > > on > > > >> > first > > > >> > > > > > >> startup. > > > >> > > > > > >> > > Once there is a broker config file then this is > used > > > >> (since > > > >> > it > > > >> > > > may > > > >> > > > > > >> have > > > >> > > > > > >> > > been updated by creating or modifying entities > > through > > > >> the > > > >> > > > > > management > > > >> > > > > > >> > > functions). The broker ships with a default > initial > > > >> config > > > >> > > > which > > > >> > > > > is > > > >> > > > > > >> > > contained within its jar files, however we allow > > people > > > >> to > > > >> > > > provide > > > >> > > > > > >> there > > > >> > > > > > >> > > own. Records in the config file a copied verbatim > > into > > > >> the > > > >> > > > config > > > >> > > > > > >> store > > > >> > > > > > >> > - > > > >> > > > > > >> > > the only difference being that ids are generated > for > > > each > > > >> > > > entity. > > > >> > > > > > The > > > >> > > > > > >> > > interpolation from property names to values is done > > > each > > > >> > time > > > >> > > > the > > > >> > > > > > >> broker > > > >> > > > > > >> > > reads the config. If the broker finds there is > > config > > > in > > > >> > the > > > >> > > > > store > > > >> > > > > > >> path > > > >> > > > > > >> > > then it completely ignores the initial config - it > > does > > > >> not > > > >> > > > > examine > > > >> > > > > > >> any > > > >> > > > > > >> > > differences. > > > >> > > > > > >> > > > > > >> > > > > > >> > > Are you looking to start a completely fresh broker > > each > > > >> > time, > > > >> > > or > > > >> > > > > > >> merely > > > >> > > > > > >> > to > > > >> > > > > > >> > > be able to change certain properties (such as port > > > >> numbers) > > > >> > on > > > >> > > > > each > > > >> > > > > > >> > > restart? If you do not want to retain any changes > to > > > the > > > >> > > broker > > > >> > > > > > >> > > configuration made while the broker is actually > > > running, > > > >> > then > > > >> > > > you > > > >> > > > > > >> could > > > >> > > > > > >> > use > > > >> > > > > > >> > > a "memory" config store rather than a Json one. If > > you > > > >> want > > > >> > > to > > > >> > > > > > retain > > > >> > > > > > >> > any > > > >> > > > > > >> > > changes made through management, but desire the > > ability > > > >> to > > > >> > > > change > > > >> > > > > > >> certain > > > >> > > > > > >> > > properties (like ports) on each startup, then you > > don't > > > >> need > > > >> > > to > > > >> > > > > > worry > > > >> > > > > > >> > about > > > >> > > > > > >> > > the fact that the initial configuration is only > > loaded > > > >> the > > > >> > > first > > > >> > > > > > time > > > >> > > > > > >> - > > > >> > > > > > >> > you > > > >> > > > > > >> > > just need to pass in the property values you want > on > > > >> > startup. > > > >> > > > > > >> > > > > > >> > > > > > >> > > In terms of an example system properties file... > The > > > >> > default > > > >> > > > > > >> > > initial-config.json defines the amqp port to be > > > >> > > > ${qpid.amqp_port} > > > >> > > > > > and > > > >> > > > > > >> the > > > >> > > > > > >> > > http port to run on ${qpid.http_port}, so if I > > create a > > > >> > > > properties > > > >> > > > > > >> file > > > >> > > > > > >> > > called rob.properties which contains > > > >> > > > > > >> > > > > > >> > > > > > >> > > qpid.http_port=8888 > > > >> > > > > > >> > > qpid.amqp_port=5555 > > > >> > > > > > >> > > > > > >> > > > > > >> > > and then run qpid with the argument -props > > > rob.properties > > > >> > > then I > > > >> > > > > > >> get... > > > >> > > > > > >> > > > > > >> > > > > > >> > > [Broker] BRK-1002 : Starting : Listening on TCP > port > > > 5555 > > > >> > > > > > >> > > [Broker] MNG-1001 : Web Management Startup > > > >> > > > > > >> > > [Broker] MNG-1002 : Starting : HTTP : Listening on > > TCP > > > >> port > > > >> > > 8888 > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > So, when you use your initial or stored config you > > just > > > >> need > > > >> > > to > > > >> > > > > > ensure > > > >> > > > > > >> > all > > > >> > > > > > >> > > the variables you use in your config are set in > your > > > >> > > properties > > > >> > > > > file > > > >> > > > > > >> > (some > > > >> > > > > > >> > > properties have defaults within the code if they > are > > > not > > > >> > > > otherwise > > > >> > > > > > >> set - > > > >> > > > > > >> > > e.g. qpid.amqp_port will default to 5672 if it is > not > > > set > > > >> > > > > > elsewhere). > > > >> > > > > > >> > > > > > >> > > > > > >> > > Hope this helps, > > > >> > > > > > >> > > Rob > > > >> > > > > > >> > > > > > >> > > > > > >> > > On 8 April 2016 at 00:41, rammohan ganapavarapu < > > > >> > > > > > >> rammohanga...@gmail.com > > > >> > > > > > >> > > > > > >> > > > > > >> > > wrote: > > > >> > > > > > >> > > > > > >> > > > > > >> > > > Rob, > > > >> > > > > > >> > > > > > > >> > > > > > >> > > > Thank you, one more question on -icp and -sp, so > > what > > > >> if i > > > >> > > > have > > > >> > > > > > >> updated > > > >> > > > > > >> > > icp > > > >> > > > > > >> > > > with some property change and restarted broker > > with > > > >> icp > > > >> > > > (every > > > >> > > > > > >> time i > > > >> > > > > > >> > > > restart broker i am using initial config > > > >> > > > > > >> > > > "/opt/qpid-java-broker/bin/qpid-server -icp > > > >> > > > > > >> > > > /opt/qpid-java-broker/etc/config.json" not sure > if > > > >> its is > > > >> > > > right > > > >> > > > > > way > > > >> > > > > > >> or > > > >> > > > > > >> > > > not), does it automatically update config file in > > > -sp? > > > >> i > > > >> > my > > > >> > > > case > > > >> > > > > > it > > > >> > > > > > >> did > > > >> > > > > > >> > > not > > > >> > > > > > >> > > > updated the config file in store-path upon > restart. > > > >> What > > > >> > > will > > > >> > > > > > >> happened > > > >> > > > > > >> > > if i > > > >> > > > > > >> > > > have differences in initial config file that i > use > > to > > > >> > start > > > >> > > > > broker > > > >> > > > > > >> and > > > >> > > > > > >> > > the > > > >> > > > > > >> > > > config file under store-path? > > > >> > > > > > >> > > > > > > >> > > > > > >> > > > Thanks, > > > >> > > > > > >> > > > Ram > > > >> > > > > > >> > > > > > > >> > > > > > >> > > > On Thu, Apr 7, 2016 at 3:59 PM, Rob Godfrey < > > > >> > > > > > >> rob.j.godf...@gmail.com> > > > >> > > > > > >> > > > wrote: > > > >> > > > > > >> > > > > > > >> > > > > > >> > > > > This looks like a client error to me... the > line > > > >> which > > > >> > > says: > > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > Client restricted itself to : PLAIN > > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > Out of interest what happens if you remove the > > > >> > > > > > >> > &sasl_mechs='ANONYMOUS' > > > >> > > > > > >> > > > from > > > >> > > > > > >> > > > > your connection URL? Without any sort of > > > restriction > > > >> > I'd > > > >> > > > > expect > > > >> > > > > > >> the > > > >> > > > > > >> > > > client > > > >> > > > > > >> > > > > to do the right thing. > > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > I need to get to sleep now (1am here :-) )... > > I'll > > > >> have > > > >> > > > deeper > > > >> > > > > > >> look > > > >> > > > > > >> > in > > > >> > > > > > >> > > > the > > > >> > > > > > >> > > > > morning. > > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > -- Rob > > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > On 7 April 2016 at 23:51, rammohan > ganapavarapu < > > > >> > > > > > >> > > rammohanga...@gmail.com > > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > wrote: > > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > Rob, > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > thanks for the explanation, do you have a > > sample > > > >> > > > > > >> > > > > --system-properties-file? > > > >> > > > > > >> > > > > > that i can take a look? > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > Also i just tried 6.0.1 but my client/app is > > > >> throwing > > > >> > > this > > > >> > > > > > >> error, i > > > >> > > > > > >> > > am > > > >> > > > > > >> > > > > not > > > >> > > > > > >> > > > > > a developer, i am ops guy and i dont want to > > > change > > > >> > the > > > >> > > > > > existing > > > >> > > > > > >> > code > > > >> > > > > > >> > > > but > > > >> > > > > > >> > > > > > wanted to make java qpid work. This is the > > error > > > i > > > >> am > > > >> > > > > getting > > > >> > > > > > >> with > > > >> > > > > > >> > > > > 6.0.1v.. > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > 2016-04-07 22:32:36,726 > > > >> > > > > > >> > > > > > > > > >> > > QPIDConnectionManager-80478ba7-b31e-483a-823e-f726104ac1db > > > >> > > > > > ERROR > > > >> > > > > > >> > > > > > S.QUEUECLIENTSERVICE - > > > >> > ConnectionImpl.openConnection() : > > > >> > > > > Error > > > >> > > > > > >> > > > connecting > > > >> > > > > > >> > > > > > to Connection : 0 Host = qphost01 > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > >> > > > > > >> > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > url=amqp://null:********@qphost011460067563391/? > > > >> brokerlist='tcp://localhost:5672?connecttimeout='5000'& > > > >> sasl_mechs='ANONYMOUS'' > > > >> > > > > > >> > > > > > error Unknown virtualhost '' username=null > > > >> > > > > > >> > > > > > 2016-04-07 22:32:36,731 > > > >> > > > > > >> > > > > > > > > >> > > QPIDConnectionManager-80478ba7-b31e-483a-823e-f726104ac1db > > > >> > > > > > ERROR > > > >> > > > > > >> > > > > > S.QUEUECLIENTSERVICE - > > > >> > ConnectionImpl.openConnection() : > > > >> > > > > Error > > > >> > > > > > >> > > > connecting > > > >> > > > > > >> > > > > > to Connection : 0 Host = qphost01 > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > >> > > > > > >> > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > url=amqp://null:********@qphost011460067563391/? > > > >> brokerlist='tcp://localhost:5672?connecttimeout='5000'& > > > >> sasl_mechs='ANONYMOUS'' > > > >> > > > > > >> > > > > > error Client and broker have no SASL > mechanisms > > > in > > > >> > > common. > > > >> > > > > > >> Broker > > > >> > > > > > >> > > > allows > > > >> > > > > > >> > > > > : > > > >> > > > > > >> > > > > > ANONYMOUS Client has : [EXTERNAL, GSSAPI, > > > >> > > CRAM-MD5-HASHED, > > > >> > > > > > >> > CRAM-MD5, > > > >> > > > > > >> > > > > > AMQPLAIN, PLAIN, ANONYMOUS] Client restricted > > > >> itself > > > >> > to > > > >> > > : > > > >> > > > > > PLAIN > > > >> > > > > > >> > > > > > username=guest > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > And here is my sasl mechanism. > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > curl -s 0:10001/service/sasl > > > >> > > > > > >> > > > > > { > > > >> > > > > > >> > > > > > "user" : "ANONYMOUS", > > > >> > > > > > >> > > > > > "mechanisms" : [ "ANONYMOUS" ] > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > Same SASL with 0.28 works fine with my app > but > > > >> 6.0.1 > > > >> > is > > > >> > > > not > > > >> > > > > > >> > working. > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > Thanks, > > > >> > > > > > >> > > > > > Ram > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > On Thu, Apr 7, 2016 at 3:39 PM, Rob Godfrey < > > > >> > > > > > >> > rob.j.godf...@gmail.com > > > >> > > > > > >> > > > > > > >> > > > > > >> > > > > > wrote: > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > On 7 April 2016 at 23:16, rammohan > > > ganapavarapu < > > > >> > > > > > >> > > > > rammohanga...@gmail.com > > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > wrote: > > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > Rob, > > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > Does v6.0.1 support Anonymous or no > > > >> > authentication? > > > >> > > > last > > > >> > > > > > >> time > > > >> > > > > > >> > > when > > > >> > > > > > >> > > > i > > > >> > > > > > >> > > > > > try > > > >> > > > > > >> > > > > > > to > > > >> > > > > > >> > > > > > > > use .32 it was not working with > Anonymous. > > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > Yes, Anonymous is supported. Which AMQP > > > protocol > > > >> > are > > > >> > > > you > > > >> > > > > > >> using > > > >> > > > > > >> > > > (0-9-1, > > > >> > > > > > >> > > > > > > 0-10, or 1.0)... I would expect that > > Anonymous > > > >> > should > > > >> > > > work > > > >> > > > > > on > > > >> > > > > > >> > 0.32 > > > >> > > > > > >> > > > > > however > > > >> > > > > > >> > > > > > > I think in 0.32 the "no authentication > layer > > at > > > >> all" > > > >> > > > > option > > > >> > > > > > >> for > > > >> > > > > > >> > > AMQP > > > >> > > > > > >> > > > > 1.0 > > > >> > > > > > >> > > > > > > probably didn't work (this is different to > an > > > >> > > > > authentication > > > >> > > > > > >> > layer > > > >> > > > > > >> > > > > which > > > >> > > > > > >> > > > > > > allows anonymous). > > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > Sorry i was not clear in my previous > > email, i > > > >> was > > > >> > > > taking > > > >> > > > > > >> about > > > >> > > > > > >> > > > > > properties > > > >> > > > > > >> > > > > > > > file not broker storage format, the use > > case > > > is > > > >> > if i > > > >> > > > > > wanted > > > >> > > > > > >> to > > > >> > > > > > >> > > > > override > > > >> > > > > > >> > > > > > > > some of these properties and i have my > own > > > >> custom > > > >> > > > > > >> tool/script > > > >> > > > > > >> > > that > > > >> > > > > > >> > > > > > goes > > > >> > > > > > >> > > > > > > > through the properties files and replace > > with > > > >> the > > > >> > > > > > override i > > > >> > > > > > >> > > > defined, > > > >> > > > > > >> > > > > > so > > > >> > > > > > >> > > > > > > i > > > >> > > > > > >> > > > > > > > want to use the same tool/script for qpid > > > >> config > > > >> > as > > > >> > > > > well. > > > >> > > > > > My > > > >> > > > > > >> > tool > > > >> > > > > > >> > > > > only > > > >> > > > > > >> > > > > > > > support key:value but if we have json > array > > > it > > > >> > wont > > > >> > > > > work. > > > >> > > > > > So > > > >> > > > > > >> > if i > > > >> > > > > > >> > > > > want > > > >> > > > > > >> > > > > > to > > > >> > > > > > >> > > > > > > > pass overrides as "-prop" command line > > > >> arguments > > > >> > > what > > > >> > > > > are > > > >> > > > > > >> the > > > >> > > > > > >> > > > > > properties > > > >> > > > > > >> > > > > > > > that java qpid support as command line? > > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > Below if my config, is it possible to > pass > > > all > > > >> > these > > > >> > > > as > > > >> > > > > > >> command > > > >> > > > > > >> > > > line > > > >> > > > > > >> > > > > > > > arguments? > > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > { > > > >> > > > > > >> > > > > > > > "authenticationproviders" : [ { > > > >> > > > > > >> > > > > > > > "id" : "7050933f-3485-4866-95d2- > > > >> 1f1b258ea3ac", > > > >> > > > > > >> > > > > > > > "name" : "Anonymous", > > > >> > > > > > >> > > > > > > > "type" : "Anonymous" > > > >> > > > > > >> > > > > > > > } ], > > > >> > > > > > >> > > > > > > > "defaultVirtualHost" : "default", > > > >> > > > > > >> > > > > > > > "id" : "c433a66c-e6dc-4c48-be01- > > > >> 268295f580bc", > > > >> > > > > > >> > > > > > > > "modelVersion" : "1.3", > > > >> > > > > > >> > > > > > > > "name" : "Broker", > > > >> > > > > > >> > > > > > > > "plugins" : [ { > > > >> > > > > > >> > > > > > > > "id" : "58889cb7-9b9b-4866-bab2- > > > >> 4cfd63266dbf", > > > >> > > > > > >> > > > > > > > "name" : "httpManagement", > > > >> > > > > > >> > > > > > > > "pluginType" : "MANAGEMENT-HTTP" > > > >> > > > > > >> > > > > > > > }, { > > > >> > > > > > >> > > > > > > > "id" : "67282f5e-ebab-4341-9ff5- > > > >> 27a58fd2df89", > > > >> > > > > > >> > > > > > > > "name" : "jmxManagement", > > > >> > > > > > >> > > > > > > > "pluginType" : "MANAGEMENT-JMX" > > > >> > > > > > >> > > > > > > > } ], > > > >> > > > > > >> > > > > > > > "ports" : [ { > > > >> > > > > > >> > > > > > > > "authenticationProvider" : > "Anonymous", > > > >> > > > > > >> > > > > > > > "id" : "99e13356-080a-4abe-852e- > > > >> 8c452149cdae", > > > >> > > > > > >> > > > > > > > "name" : "JMX_CONNECTOR", > > > >> > > > > > >> > > > > > > > "port" : "9099", > > > >> > > > > > >> > > > > > > > "protocols" : [ "JMX_RMI" ] > > > >> > > > > > >> > > > > > > > }, { > > > >> > > > > > >> > > > > > > > "authenticationProvider" : > "Anonymous", > > > >> > > > > > >> > > > > > > > "id" : "12813407-62ae-429f-8bee- > > > >> 75802f3b6553", > > > >> > > > > > >> > > > > > > > "name" : "RMI_REGISTRY", > > > >> > > > > > >> > > > > > > > "port" : "8999", > > > >> > > > > > >> > > > > > > > "protocols" : [ "RMI" ] > > > >> > > > > > >> > > > > > > > }, { > > > >> > > > > > >> > > > > > > > "authenticationProvider" : > "Anonymous", > > > >> > > > > > >> > > > > > > > "id" : "3b107675-edd7-40a3-86c2- > > > >> 3113b46157f9", > > > >> > > > > > >> > > > > > > > "name" : "AMQP", > > > >> > > > > > >> > > > > > > > "port" : "5672" > > > >> > > > > > >> > > > > > > > }, { > > > >> > > > > > >> > > > > > > > "authenticationProvider" : > "Anonymous", > > > >> > > > > > >> > > > > > > > "id" : "6dff5ecf-1a4b-46ad-b93d- > > > >> f2606b5e4f6e", > > > >> > > > > > >> > > > > > > > "name" : "HTTP", > > > >> > > > > > >> > > > > > > > "port" : "10001", > > > >> > > > > > >> > > > > > > > "protocols" : [ "HTTP" ] > > > >> > > > > > >> > > > > > > > } ], > > > >> > > > > > >> > > > > > > > "storeVersion" : 1, > > > >> > > > > > >> > > > > > > > "virtualhosts" : [ { > > > >> > > > > > >> > > > > > > > "createdTime" : 1439482250329, > > > >> > > > > > >> > > > > > > > "id" : "eef20ba0-33d3-4b37-93a7- > > > >> fe2b34e54503", > > > >> > > > > > >> > > > > > > > "name" : "default", > > > >> > > > > > >> > > > > > > > "storePath" : > > "/ebs//derbystore/default", > > > >> > > > > > >> > > > > > > > "storeType" : "DERBY", > > > >> > > > > > >> > > > > > > > "type" : "STANDARD" > > > >> > > > > > >> > > > > > > > } ] > > > >> > > > > > >> > > > > > > > } > > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > In 6.0 you can replace any value in the > JSON > > > >> with a > > > >> > > > > > reference > > > >> > > > > > >> to > > > >> > > > > > >> > a > > > >> > > > > > >> > > > > > > property, for example > > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > "name" : "${myPortName}", > > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > this will then interpolate the value from > the > > > >> > > property, > > > >> > > > so > > > >> > > > > > if > > > >> > > > > > >> you > > > >> > > > > > >> > > set > > > >> > > > > > >> > > > > the > > > >> > > > > > >> > > > > > > property myPortName to "RobsPort" that will > > be > > > >> the > > > >> > > value > > > >> > > > > > used. > > > >> > > > > > >> > > Type > > > >> > > > > > >> > > > > > > conversions will be performed, so if the > > > required > > > >> > > value > > > >> > > > is > > > >> > > > > > an > > > >> > > > > > >> > > integer > > > >> > > > > > >> > > > > it > > > >> > > > > > >> > > > > > > will convert to an integer. If the value > > > >> required > > > >> > is > > > >> > > a > > > >> > > > > list > > > >> > > > > > >> then > > > >> > > > > > >> > > you > > > >> > > > > > >> > > > > can > > > >> > > > > > >> > > > > > > use a String representation of a list in > Json > > > >> > format. > > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > You can set the properties individually, or > > you > > > >> can > > > >> > > pass > > > >> > > > > in > > > >> > > > > > a > > > >> > > > > > >> > > > > properties > > > >> > > > > > >> > > > > > > file using -props or > --system-properties-file > > > >> (so if > > > >> > > you > > > >> > > > > > have > > > >> > > > > > >> a > > > >> > > > > > >> > > > > > properties > > > >> > > > > > >> > > > > > > file already maybe you can just pass this > > in). > > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > One more question or may be clarification > > is, > > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > *-sp (--store-path) is the path of config > > > file > > > >> > that > > > >> > > > will > > > >> > > > > > >> > > generated > > > >> > > > > > >> > > > by > > > >> > > > > > >> > > > > > > qpidd > > > >> > > > > > >> > > > > > > > from the initial config right? what is > the > > > use > > > >> of > > > >> > > > > > >> store-path?* > > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > That is correct. Some people just like to > > have > > > >> > config > > > >> > > > > files > > > >> > > > > > >> in a > > > >> > > > > > >> > > > > > > non-default location :-) > > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > Hope this helps, > > > >> > > > > > >> > > > > > > Rob > > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > *Thanks,* > > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > *Ram* > > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > On Thu, Apr 7, 2016 at 3:02 PM, Rob > > Godfrey < > > > >> > > > > > >> > > > rob.j.godf...@gmail.com > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > > wrote: > > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > > Firstly, 0.28 is quite old now - I > would > > > >> > recommend > > > >> > > > > > >> updating > > > >> > > > > > >> > to > > > >> > > > > > >> > > > > v6.0.1 > > > >> > > > > > >> > > > > > > if > > > >> > > > > > >> > > > > > > > > you can. > > > >> > > > > > >> > > > > > > > > > > > >> > > > > > >> > > > > > > > > Secondly I'm not sure I understand your > > > >> > question - > > > >> > > > are > > > >> > > > > > you > > > >> > > > > > >> > > asking > > > >> > > > > > >> > > > > > about > > > >> > > > > > >> > > > > > > > > overriding particular properties, or > the > > > >> storage > > > >> > > > > format > > > >> > > > > > >> for > > > >> > > > > > >> > the > > > >> > > > > > >> > > > > > broker > > > >> > > > > > >> > > > > > > > > configuration - these are two different > > > >> things. > > > >> > > In > > > >> > > > > > terms > > > >> > > > > > >> of > > > >> > > > > > >> > > > > > > properties / > > > >> > > > > > >> > > > > > > > > context overrides this can be specified > > > >> using a > > > >> > > > > > properties > > > >> > > > > > >> > file > > > >> > > > > > >> > > > (at > > > >> > > > > > >> > > > > > > least > > > >> > > > > > >> > > > > > > > > in v6 - I forget exactly how it worked > on > > > >> 0.28). > > > >> > > In > > > >> > > > > > >> terms of > > > >> > > > > > >> > > the > > > >> > > > > > >> > > > > > > > > configuration, JSON is currently the > only > > > >> text > > > >> > > based > > > >> > > > > > >> format > > > >> > > > > > >> > > > > > supported. > > > >> > > > > > >> > > > > > > > You > > > >> > > > > > >> > > > > > > > > can use a database for the broker > config > > > >> > storage, > > > >> > > > > there > > > >> > > > > > >> are > > > >> > > > > > >> > > built > > > >> > > > > > >> > > > > in > > > >> > > > > > >> > > > > > > > > mechanisms to support Derby, BDB, and > > > generic > > > >> > JDBC > > > >> > > > > > config > > > >> > > > > > >> > > stores. > > > >> > > > > > >> > > > > > > > > > > > >> > > > > > >> > > > > > > > > May I ask what advantage you would get > by > > > >> using > > > >> > > YAML > > > >> > > > > or > > > >> > > > > > >> > > > properties > > > >> > > > > > >> > > > > > > files > > > >> > > > > > >> > > > > > > > > instead of JSON? > > > >> > > > > > >> > > > > > > > > > > > >> > > > > > >> > > > > > > > > -- Rob > > > >> > > > > > >> > > > > > > > > > > > >> > > > > > >> > > > > > > > > On 7 April 2016 at 22:43, rammohan > > > >> ganapavarapu > > > >> > < > > > >> > > > > > >> > > > > > > rammohanga...@gmail.com > > > >> > > > > > >> > > > > > > > > > > > >> > > > > > >> > > > > > > > > wrote: > > > >> > > > > > >> > > > > > > > > > > > >> > > > > > >> > > > > > > > > > Hi, > > > >> > > > > > >> > > > > > > > > > > > > >> > > > > > >> > > > > > > > > > Is there any way to start > > qpid-java-0.28 > > > >> > broker > > > >> > > > > using > > > >> > > > > > >> > > > .properties > > > >> > > > > > >> > > > > > > file > > > >> > > > > > >> > > > > > > > or > > > >> > > > > > >> > > > > > > > > > .xml or .yaml file instead of .json > > file? > > > >> or > > > >> > > what > > > >> > > > > are > > > >> > > > > > >> the > > > >> > > > > > >> > > other > > > >> > > > > > >> > > > > > ways > > > >> > > > > > >> > > > > > > to > > > >> > > > > > >> > > > > > > > > > pass override properties instead of > > JSON > > > >> > config > > > >> > > > > file? > > > >> > > > > > >> > > > > > > > > > > > > >> > > > > > >> > > > > > > > > > > > > >> > > > > > >> > > > > > > > > > Thanks, > > > >> > > > > > >> > > > > > > > > > Ram > > > >> > > > > > >> > > > > > > > > > > > > >> > > > > > >> > > > > > > > > > > > >> > > > > > >> > > > > > > > > > > >> > > > > > >> > > > > > > > > > >> > > > > > >> > > > > > > > > >> > > > > > >> > > > > > > > >> > > > > > >> > > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > >> > > > > > >> > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > > > > > > > > > > > > > >
