Any one have any idea why my jconsole is still asking for credentials even
though i have configured to use ANONYMOUS auth provider for jmx port?
On Fri, Aug 26, 2016 at 3:22 PM, rammohan ganapavarapu <
rammohanga...@gmail.com> wrote:
> Thank you Rob, i am also trying to configure JMX, i have added JMX ports
> in config and server listening on them but when i try to connect using
> connect string "service:jmx:rmi:///jndi/rmi://localhost:8999/jmxrmi" its
> asking me credentials but i configured to use Anonymous for that port
>
> Any idea?
>
>
> }, {
> "id" : "196b5a76-d552-4a38-9560-63a010bb40a0",
> "name" : "JMX_CONNECTOR",
> "type" : "JMX",
> "authenticationProvider" : "ANONYMOUS",
> "port" : "9099",
> "lastUpdatedBy" : "admin",
> "lastUpdatedTime" : 1472242532264,
> "createdBy" : "admin",
> "createdTime" : 1472242532264
> }, {
> "id" : "881b3b25-463d-4efe-8b27-0335525ea920",
> "name" : "RMI_REGISTRY",
> "type" : "RMI",
> "port" : "8999",
> "lastUpdatedBy" : "admin",
> "lastUpdatedTime" : 1472242484471,
> "createdBy" : "admin",
> "createdTime" : 1472242484471
> } ],
>
> On Fri, Aug 26, 2016 at 1:10 PM, Rob Godfrey <rob.j.godf...@gmail.com>
> wrote:
>
>> Hi Ram,
>>
>> This page from the broker docs covers most aspects of memory
>> configuration:
>>
>> https://qpid.apache.org/releases/qpid-java-6.0.4/java-broker
>> /book/Java-Broker-Runtime-Memory.html
>>
>> Hope this helps,
>> Rob
>>
>> On 26 August 2016 at 20:49, rammohan ganapavarapu <
>> rammohanga...@gmail.com>
>> wrote:
>>
>> > Yes, i changed it to use Anonymous and its working now. Now i need some
>> > documents or suggestions on how to configure Mem settings and flow to
>> disk
>> > settings in config.json
>> >
>> > Thanks,
>> > Ram
>> >
>> > On Fri, Aug 26, 2016 at 12:16 PM, Rob Godfrey <rob.j.godf...@gmail.com>
>> > wrote:
>> >
>> > > Hi Ram,
>> > >
>> > > I assume that you have configured port 5672 to use the Plain auth
>> > provider
>> > > (each port can only be associated with a single auth provider - you
>> can
>> > add
>> > > other ports which use the a different auth provider). The issue here
>> is
>> > > that by default the Java Broker will not allow PLAIN SASL over a
>> non-TLS
>> > > connection. You can override this by changing the
>> "secureOnlyMechanisms"
>> > > attribute of the (password) auth provider. Setting this value to the
>> > empty
>> > > list within the password auth provider section
>> > >
>> > > "secureOnlyMechanisms" : [ ],
>> > >
>> > > in your json config file, will mean than PLAIN will be offered as a
>> > > mechanism.
>> > >
>> > > Alternatively you can change your port configuration to use you
>> anonymous
>> > > authentication provider, rather than the password provider.
>> > >
>> > > Hope this helps,
>> > > Rob
>> > >
>> > >
>> > > On 26 August 2016 at 19:27, rammohan ganapavarapu <
>> > rammohanga...@gmail.com
>> > > >
>> > > wrote:
>> > >
>> > > > Rob,
>> > > >
>> > > > I have followed as you said and created a clean slate v6 broker and
>> > from
>> > > UI
>> > > > created two auth provides palin and anonimous but when i make this
>> api
>> > > call
>> > > > i am getting different sasl list
>> > > >
>> > > > curl -s http://localhost:10001/service/sasl
>> > > > {
>> > > > "mechanisms" : [ "CRAM-MD5", "SCRAM-SHA-1", "SCRAM-SHA-256" ]
>> > > >
>> > > > and as you told you before my client is throwing this error, so
>> client
>> > > has
>> > > > a logic to try Plain with user guest first if it doesn't work then
>> try
>> > > > anonymous. Since broker doesn't have any of those in its sasl list
>> may
>> > be
>> > > > its not able to connect?
>> > > >
>> > > >
>> > > > url=amqp://guest:********@/?brokerlist='tcp://host:5672?
>> > > > connecttimeout='5000'&sasl_mechs='PLAIN''
>> > > > Not Connected. error Client and broker have no SASL mechanisms in
>> > common.
>> > > > Broker allows : CRAM-MD5 SCRAM-SHA-1 SCRAM-SHA-256 Client has :
>> > > [EXTERNAL,
>> > > > GSSAPI, SCRAM-SHA-256, SCRAM-SHA-1, CRAM-MD5-HASHED, CRAM-MD5,
>> PLAIN,
>> > > > AMQPLAIN, ANONYMOUS, XOAUTH2] Client restricted itself to : PLAIN
>> > > > username=guest
>> > > >
>> > > >
>> > > > and
>> > > >
>> > > > url=amqp://guest:********@/?brokerlist='tcp://host:5672?
>> > > > connecttimeout='5000'&sasl_mechs='ANONYMOUS''
>> > > > Not Connected. error Client and broker have no SASL mechanisms in
>> > common.
>> > > > Broker allows : CRAM-MD5 SCRAM-SHA-1 SCRAM-SHA-256 Client has :
>> > > [EXTERNAL,
>> > > > GSSAPI, SCRAM-SHA-256, SCRAM-SHA-1, CRAM-MD5-HASHED, CRAM-MD5,
>> PLAIN,
>> > > > AMQPLAIN, ANONYMOUS, XOAUTH2] Client restricted itself to :
>> ANONYMOUS
>> > > > username=null
>> > > >
>> > > > Thanks,
>> > > > Ram
>> > > >
>> > > > On Tue, Apr 19, 2016 at 10:10 AM, rammohan ganapavarapu <
>> > > > rammohanga...@gmail.com> wrote:
>> > > >
>> > > > > Hi Rob,
>> > > > >
>> > > > > I did not get chance to try v6, i will try and let you know.
>> > > > >
>> > > > > Ram
>> > > > >
>> > > > > On Tue, Apr 19, 2016 at 12:56 AM, Rob Godfrey <
>> > rob.j.godf...@gmail.com
>> > > >
>> > > > > wrote:
>> > > > >
>> > > > >> Hi Ram,
>> > > > >>
>> > > > >> have you got v6 working now? The memory settings for the broker
>> > > depend
>> > > > >> upon which version you are using. For version 6 there is a
>> > > > comprehensive
>> > > > >> discussion on memory allocation settings in the manual:
>> > > > >> https://qpid.apache.org/releases/qpid-java-6.0.1/java-
>> > > > >> broker/book/Java-Broker-Runtime-Memory.html
>> > > > >>
>> > > > >> Versions prior to v6 use memory (and threads) very differently.
>> > > > >>
>> > > > >> Hope this helps,
>> > > > >> Rob
>> > > > >>
>> > > > >> On 18 April 2016 at 22:09, rammohan ganapavarapu <
>> > > > rammohanga...@gmail.com
>> > > > >> >
>> > > > >> wrote:
>> > > > >>
>> > > > >> > Rob,
>> > > > >> >
>> > > > >> > One more question in the same context, what are the recommended
>> > JVM
>> > > > >> > settings for java broker? i am using default "-Xmx1024m" its
>> > working
>> > > > >> fine
>> > > > >> > but i wanted to follow the best practices. Please advice.
>> > > > >> >
>> > > > >> >
>> > > > >> > Thanks,
>> > > > >> > Ram
>> > > > >> >
>> > > > >> > On Wed, Apr 13, 2016 at 6:46 AM, Rob Godfrey <
>> > > rob.j.godf...@gmail.com
>> > > > >
>> > > > >> > wrote:
>> > > > >> >
>> > > > >> > > Hi Ram,
>> > > > >> > >
>> > > > >> > > Apologies, I've been having a few issues with my internet
>> > > provider.
>> > > > >> > >
>> > > > >> > > Can you try setting up an entirely clean install of Qpid
>> 6.0.1
>> > and
>> > > > >> > > configuring (through the UI) that to use ANONYMOUS, and then
>> > check
>> > > > >> your
>> > > > >> > > client can connect.
>> > > > >> > >
>> > > > >> > > This is what I did, and it works fine for me.
>> > > > >> > >
>> > > > >> > > For the rest of your requirements (like setting the log file
>> > > > location,
>> > > > >> > > etc.) you really want to be using version 6 or later.
>> > > > >> > >
>> > > > >> > > Cheers,
>> > > > >> > > Rob
>> > > > >> > >
>> > > > >> > > On 11 April 2016 at 22:44, rammohan ganapavarapu <
>> > > > >> > rammohanga...@gmail.com>
>> > > > >> > > wrote:
>> > > > >> > >
>> > > > >> > > > Rob,
>> > > > >> > > >
>> > > > >> > > > I have tried with virtualhost config that you have provided
>> > but
>> > > i
>> > > > am
>> > > > >> > > still
>> > > > >> > > > getting connection error. I would like to make it work with
>> > 6.0*
>> > > > >> > version
>> > > > >> > > > but at this point i need 0.28 version to make working, so
>> if
>> > you
>> > > > can
>> > > > >> > help
>> > > > >> > > > me to configure log location in 0.28 that would unblock me
>> for
>> > > > now.
>> > > > >> > > >
>> > > > >> > > > Thanks,
>> > > > >> > > > Ram
>> > > > >> > > >
>> > > > >> > > > 2016-04-11 21:40:01,845 DelayedTaskExecutor-1 ERROR
>> > > > >> > > S.QUEUECLIENTSERVICE -
>> > > > >> > > > ConnectionImpl.openConnection() : Error connecting to
>> > > Connection
>> > > > :
>> > > > >> 0
>> > > > >> > > Host =
>> > > > >> > > > localhost
>> > > > >> > > >
>> > > > >> > > >
>> > > > >> > >
>> > > > >> > url=amqp://guest:********@/?brokerlist='tcp://localhost:
>> > > > >> 5672?connecttimeout='5000'&sasl_mechs='PLAIN''
>> > > > >> > > > Not Connected. error Client and broker have no SASL
>> mechanisms
>> > > in
>> > > > >> > common.
>> > > > >> > > > Broker allows : ANONYMOUS Client has : [EXTERNAL, GSSAPI,
>> > > > >> > > CRAM-MD5-HASHED,
>> > > > >> > > > CRAM-MD5, AMQPLAIN, PLAIN, ANONYMOUS] Client restricted
>> itself
>> > > to
>> > > > :
>> > > > >> > PLAIN
>> > > > >> > > > username=guest
>> > > > >> > > >
>> > > > >> > > > 2016-04-11 21:40:01,846 DelayedTaskExecutor-1 ERROR
>> > > > >> > > S.QUEUECLIENTSERVICE -
>> > > > >> > > > ConnectionImpl.verifyQueueAndExchange() : Error binding
>> queue
>> > > > null
>> > > > >> > > > 2016-04-11 21:40:01,846 DelayedTaskExecutor-1 ERROR
>> > > > >> > > c.a.a.q.QueueBuilder -
>> > > > >> > > > QueueBuilder$1.execute() : Attempt to create exchange/queue
>> > > > >> > > > ax-ex-mxgroup001/ax-q-mxgroup001 failed.
>> > > > >> > > >
>> > > > >> > > > 2016-04-11 21:40:01,861 DelayedTaskExecutor-1 INFO
>> > > > >> > > c.a.a.q.QueueBuilder -
>> > > > >> > > > QueueBuilder$1.execute() : Creating exchange/queue
>> > > > >> > > > ax-ex-mxgroup001-dl/ax-q-mxgroup001-dl
>> > > > >> > > >
>> > > > >> > > > 2016-04-11 21:40:01,867 DelayedTaskExecutor-1 ERROR
>> > > > >> > > S.QUEUECLIENTSERVICE -
>> > > > >> > > > ConnectionImpl.openConnection() : Error connecting to
>> > > Connection
>> > > > :
>> > > > >> 0
>> > > > >> > > Host =
>> > > > >> > > > localhost
>> > > > >> > > >
>> > > > >> > > >
>> > > > >> > >
>> > > > >> > url=amqp://guest:********@/?brokerlist='tcp://localhost:
>> > > > >> 5672?connecttimeout='5000'&sasl_mechs='ANONYMOUS''
>> > > > >> > > > Not Connected. error Unknown virtualhost '' username=null
>> > > > >> > > >
>> > > > >> > > > 2016-04-11 21:40:01,870 DelayedTaskExecutor-1 ERROR
>> > > > >> > > S.QUEUECLIENTSERVICE -
>> > > > >> > > > ConnectionImpl.openConnection() : Error connecting to
>> > > Connection
>> > > > :
>> > > > >> 0
>> > > > >> > > Host =
>> > > > >> > > > localhost
>> > > > >> > > >
>> > > > >> > > >
>> > > > >> > >
>> > > > >> > url=amqp://guest:********@/?brokerlist='tcp://localhost:
>> > > > >> 5672?connecttimeout='5000'&sasl_mechs='PLAIN''
>> > > > >> > > > Not Connected. error Client and broker have no SASL
>> mechanisms
>> > > in
>> > > > >> > common.
>> > > > >> > > > Broker allows : ANONYMOUS Client has : [EXTERNAL, GSSAPI,
>> > > > >> > > CRAM-MD5-HASHED,
>> > > > >> > > > CRAM-MD5, AMQPLAIN, PLAIN, ANONYMOUS] Client restricted
>> itself
>> > > to
>> > > > :
>> > > > >> > PLAIN
>> > > > >> > > > username=guest
>> > > > >> > > >
>> > > > >> > > > 2016-04-11 21:40:01,870 DelayedTaskExecutor-1 ERROR
>> > > > >> > > S.QUEUECLIENTSERVICE -
>> > > > >> > > > ConnectionImpl.verifyQueueAndExchange() : Error binding
>> queue
>> > > > null
>> > > > >> > > >
>> > > > >> > > > On Sun, Apr 10, 2016 at 3:11 PM, Rob Godfrey <
>> > > > >> rob.j.godf...@gmail.com>
>> > > > >> > > > wrote:
>> > > > >> > > >
>> > > > >> > > > > Hi Ram,
>> > > > >> > > > >
>> > > > >> > > > > in 6.0.x the log file location can be changed directly
>> > through
>> > > > the
>> > > > >> > > config
>> > > > >> > > > > json - I really think we should first concentrate on
>> getting
>> > > > that
>> > > > >> > > working
>> > > > >> > > > > for you.
>> > > > >> > > > >
>> > > > >> > > > > I've verified that using the 6.0.x client and broker
>> with a
>> > > URL
>> > > > >> > similar
>> > > > >> > > > to
>> > > > >> > > > > the one in your log file works for ANONYMOUS.
>> > > > >> > > > >
>> > > > >> > > > > Looking at your error output again I notice that there
>> seem
>> > > > >> actually
>> > > > >> > to
>> > > > >> > > > be
>> > > > >> > > > > two connection attempts, the first ends with:
>> > > > >> > > > >
>> > > > >> > > > > error Unknown virtualhost '' username=null
>> > > > >> > > > >
>> > > > >> > > > > Then we see the second failure with the "PLAIN" error.
>> That
>> > > > first
>> > > > >> > > error
>> > > > >> > > > > indicate that ANONYMOUS log in was actually successful,
>> > > however
>> > > > >> you
>> > > > >> > > were
>> > > > >> > > > > the running into the fact that no virtualhost is mapped
>> to
>> > the
>> > > > >> empty
>> > > > >> > > > > string. That suggests to me that you don't have any
>> > > > >> > virtualhostaliases
>> > > > >> > > > > defined in your (AMQP) port config. I'd suggest that it
>> > would
>> > > > make
>> > > > >> > > sense
>> > > > >> > > > to
>> > > > >> > > > > craft an initial config based on the default initial
>> config
>> > > for
>> > > > >> 6.0.x
>> > > > >> > > > which
>> > > > >> > > > > will include a virtualhostaliases section in the AMQP
>> port
>> > > which
>> > > > >> > looks
>> > > > >> > > > > like:
>> > > > >> > > > >
>> > > > >> > > > > "virtualhostaliases" : [ {
>> > > > >> > > > > "name" : "nameAlias",
>> > > > >> > > > > "type" : "nameAlias"
>> > > > >> > > > > }, {
>> > > > >> > > > > "name" : "defaultAlias",
>> > > > >> > > > > "type" : "defaultAlias"
>> > > > >> > > > > }, {
>> > > > >> > > > > "name" : "hostnameAlias",
>> > > > >> > > > > "type" : "hostnameAlias"
>> > > > >> > > > > } ]
>> > > > >> > > > >
>> > > > >> > > > >
>> > > > >> > > > > Let me know if this works for you, then we can look at
>> some
>> > of
>> > > > >> your
>> > > > >> > > other
>> > > > >> > > > > questions.
>> > > > >> > > > >
>> > > > >> > > > > -- Rob
>> > > > >> > > > >
>> > > > >> > > > >
>> > > > >> > > > > On 9 April 2016 at 00:31, rammohan ganapavarapu <
>> > > > >> > > rammohanga...@gmail.com
>> > > > >> > > > >
>> > > > >> > > > > wrote:
>> > > > >> > > > >
>> > > > >> > > > > > Rob,
>> > > > >> > > > > >
>> > > > >> > > > > > Also how do i pass logfile location as -prop as
>> > commandline
>> > > > >> > argument?
>> > > > >> > > > or
>> > > > >> > > > > > how do i change default log file location i know we can
>> > > update
>> > > > >> > > > log4j.xml
>> > > > >> > > > > > but is there any other way?
>> > > > >> > > > > >
>> > > > >> > > > > > Ram
>> > > > >> > > > > >
>> > > > >> > > > > > On Fri, Apr 8, 2016 at 11:48 AM, rammohan ganapavarapu
>> <
>> > > > >> > > > > > rammohanga...@gmail.com> wrote:
>> > > > >> > > > > >
>> > > > >> > > > > > > Rob,
>> > > > >> > > > > > >
>> > > > >> > > > > > > I tried passing properties file as argument but it
>> didnt
>> > > > like
>> > > > >> it.
>> > > > >> > > > Does
>> > > > >> > > > > it
>> > > > >> > > > > > > support in 0.28v?
>> > > > >> > > > > > >
>> > > > >> > > > > > >
>> > > > >> > > > > > > ./qpid-server -icp ../etc/initial_config.json -prop
>> > > > >> > > > > > ../etc/qpidd.properties
>> > > > >> > > > > > >
>> > > > >> > > > > > > System Properties set to -Damqj.logging.level=info
>> > > > >> > > > > > > -DQPID_HOME=/opt/qpid-java-broker -DQPID_WORK=/ebs/
>> > > > >> > > > > > > QPID_OPTS set to -Damqj.read_write_pool_size=32
>> > > > >> > -DQPID_LOG_APPEND=
>> > > > >> > > > > > > Using QPID_CLASSPATH
>> > > > >> > > > > > >
>> > > > >> > > > > >
>> > > > >> > > > >
>> > > > >> > > >
>> > > > >> > >
>> > > > >> > /opt/qpid-java-broker/lib/*:/opt/qpid-java-broker/lib/
>> > > > >> plugins/*:/opt/qpid-java-broker/lib/opt/*
>> > > > >> > > > > > > Info: QPID_JAVA_GC not set. Defaulting to JAVA_GC
>> > > > >> > > > > -XX:+UseConcMarkSweepGC
>> > > > >> > > > > > > -XX:+HeapDumpOnOutOfMemoryError
>> > > > >> > > > > > > Info: QPID_JAVA_MEM not set. Defaulting to JAVA_MEM
>> > > > -Xmx1024m
>> > > > >> > > > > > > Exception during startup: java.lang.
>> > > > IllegalArgumentException:
>> > > > >> > > > > > > Configuration property argument is not of the format
>> > > > >> name=value:
>> > > > >> > > > > > > ../etc/qpidd.properties
>> > > > >> > > > > > > java.lang.IllegalArgumentException: Configuration
>> > > property
>> > > > >> > argument
>> > > > >> > > > is
>> > > > >> > > > > > not
>> > > > >> > > > > > > of the format name=value: ../etc/qpidd.properties
>> > > > >> > > > > > > at org.apache.qpid.server.Main.
>> > execute(Main.java:226)
>> > > > >> > > > > > > at org.apache.qpid.server.Main.<
>> > init>(Main.java:134)
>> > > > >> > > > > > > at org.apache.qpid.server.Main.ma
>> in(Main.java:125)
>> > > > >> > > > > > >
>> > > > >> > > > > > >
>> > > > >> > > > > > > ./qpid-server -icp ../etc/initial_config.json -props
>> > > > >> > > > > > > ../etc/qpidd.properties
>> > > > >> > > > > > >
>> > > > >> > > > > > > System Properties set to -Damqj.logging.level=info
>> > > > >> > > > > > > -DQPID_HOME=/opt/qpid-java-broker -DQPID_WORK=/ebs/
>> > > > >> > > > > > > QPID_OPTS set to -Damqj.read_write_pool_size=32
>> > > > >> > -DQPID_LOG_APPEND=
>> > > > >> > > > > > > Using QPID_CLASSPATH
>> > > > >> > > > > > >
>> > > > >> > > > > >
>> > > > >> > > > >
>> > > > >> > > >
>> > > > >> > >
>> > > > >> > /opt/qpid-java-broker/lib/*:/opt/qpid-java-broker/lib/
>> > > > >> plugins/*:/opt/qpid-java-broker/lib/opt/*
>> > > > >> > > > > > > Info: QPID_JAVA_GC not set. Defaulting to JAVA_GC
>> > > > >> > > > > -XX:+UseConcMarkSweepGC
>> > > > >> > > > > > > -XX:+HeapDumpOnOutOfMemoryError
>> > > > >> > > > > > > Info: QPID_JAVA_MEM not set. Defaulting to JAVA_MEM
>> > > > -Xmx1024m
>> > > > >> > > > > > >
>> > > > >> > > > > > >
>> > > > >> > > > > > >
>> > > > >> > > > > > >
>> > > > >> > > > > > > *Error: Unrecognized option: -props*
>> > > > >> > > > > > > How do i change this block from initial
>> configuration to
>> > > use
>> > > > >> > > > Anonymous?
>> > > > >> > > > > > >
>> > > > >> > > > > > > {
>> > > > >> > > > > > > "name": "Broker",
>> > > > >> > > > > > > "storeVersion": 1,
>> > > > >> > > > > > > "modelVersion": "1.2",
>> > > > >> > > > > > > "defaultVirtualHost" : "default",
>> > > > >> > > > > > > "authenticationproviders" : [ {
>> > > > >> > > > > > > "name" : "passwordFile",
>> > > > >> > > > > > > "type" : "PlainPasswordFile",
>> > > > >> > > > > > > "path" : "${qpid.home_dir}/etc/passwd",
>> > > > >> > > > > > > "preferencesproviders" : [{
>> > > > >> > > > > > > "name": "fileSystemPreferences",
>> > > > >> > > > > > > "type": "FileSystemPreferences",
>> > > > >> > > > > > > "path" : "${qpid.work_dir}/user.
>> > preferences.json"
>> > > > >> > > > > > > }]
>> > > > >> > > > > > > } ],
>> > > > >> > > > > > >
>> > > > >> > > > > > > On Fri, Apr 8, 2016 at 10:26 AM, Rob Godfrey <
>> > > > >> > > > rob.j.godf...@gmail.com>
>> > > > >> > > > > > > wrote:
>> > > > >> > > > > > >
>> > > > >> > > > > > >> Hi Ram,
>> > > > >> > > > > > >>
>> > > > >> > > > > > >> so one approach to this would be to define you
>> > > > authentication
>> > > > >> > > > > providers
>> > > > >> > > > > > up
>> > > > >> > > > > > >> from in your config file, so you have an an
>> Anonymous
>> > > > >> provider
>> > > > >> > > named
>> > > > >> > > > > > >> "anonymous" and a password file provider named
>> > > > >> "passwordFile" or
>> > > > >> > > > > > >> something. Then in the port sections (AMQP, HTTP,
>> JMX,
>> > > > etc)
>> > > > >> you
>> > > > >> > > can
>> > > > >> > > > > > >> parameterise the value they have for the name of the
>> > auth
>> > > > >> > provider
>> > > > >> > > > > they
>> > > > >> > > > > > >> are
>> > > > >> > > > > > >> using. So your initial JSON config file could
>> contain
>> > > > >> something
>> > > > >> > > > like:
>> > > > >> > > > > > >>
>> > > > >> > > > > > >> "ports" : [ {
>> > > > >> > > > > > >> "name" : "AMQP",
>> > > > >> > > > > > >> "port" : "${qpid.amqp_port}",
>> > > > >> > > > > > >> "authenticationProvider" :
>> > > > >> > > > > "${qpid.amqp_port_authenticationProvider}",
>> > > > >> > > > > > >>
>> > > > >> > > > > > >>
>> > > > >> > > > > > >> and then you could override which provider to use at
>> > > > runtime
>> > > > >> by
>> > > > >> > > > > setting
>> > > > >> > > > > > >> the
>> > > > >> > > > > > >> property qpid.amqp_port_authenticationProvider to
>> > > > anonymous
>> > > > >> or
>> > > > >> > > > > > >> passwordFile
>> > > > >> > > > > > >> (or the name of any other authentication provider
>> that
>> > is
>> > > > >> > defined
>> > > > >> > > in
>> > > > >> > > > > > your
>> > > > >> > > > > > >> JSON config.
>> > > > >> > > > > > >>
>> > > > >> > > > > > >> The only thing you can't do with properties is to
>> add
>> > new
>> > > > >> > entities
>> > > > >> > > > > into
>> > > > >> > > > > > >> the
>> > > > >> > > > > > >> config - that you have to do either by editing the
>> > file,
>> > > or
>> > > > >> by
>> > > > >> > > using
>> > > > >> > > > > the
>> > > > >> > > > > > >> REST api to modify the broker configuration while
>> it is
>> > > > >> running.
>> > > > >> > > > > > >>
>> > > > >> > > > > > >> Hope this helps,
>> > > > >> > > > > > >> Rob
>> > > > >> > > > > > >>
>> > > > >> > > > > > >> On 8 April 2016 at 18:04, rammohan ganapavarapu <
>> > > > >> > > > > > rammohanga...@gmail.com>
>> > > > >> > > > > > >> wrote:
>> > > > >> > > > > > >>
>> > > > >> > > > > > >> > Rob,
>> > > > >> > > > > > >> >
>> > > > >> > > > > > >> > Thanks for detailed explanation, i wanted to
>> restart
>> > > with
>> > > > >> the
>> > > > >> > > > > changed
>> > > > >> > > > > > >> > properties if any for example today i have
>> Anonymous
>> > > SASL
>> > > > >> and
>> > > > >> > > > later
>> > > > >> > > > > i
>> > > > >> > > > > > >> may
>> > > > >> > > > > > >> > want to use password file. How do i pass SASL
>> > mechanism
>> > > > as
>> > > > >> > > -prop?
>> > > > >> > > > > > >> >
>> > > > >> > > > > > >> > Thanks,
>> > > > >> > > > > > >> > Ram
>> > > > >> > > > > > >> >
>> > > > >> > > > > > >> > On Fri, Apr 8, 2016 at 2:10 AM, Rob Godfrey <
>> > > > >> > > > > rob.j.godf...@gmail.com>
>> > > > >> > > > > > >> > wrote:
>> > > > >> > > > > > >> >
>> > > > >> > > > > > >> > > Hi Ram,
>> > > > >> > > > > > >> > >
>> > > > >> > > > > > >> > > The initial config file is only used when there
>> is
>> > no
>> > > > >> broker
>> > > > >> > > > > config
>> > > > >> > > > > > -
>> > > > >> > > > > > >> the
>> > > > >> > > > > > >> > > idea is that it is used to populate the broker
>> > config
>> > > > on
>> > > > >> > first
>> > > > >> > > > > > >> startup.
>> > > > >> > > > > > >> > > Once there is a broker config file then this is
>> > used
>> > > > >> (since
>> > > > >> > it
>> > > > >> > > > may
>> > > > >> > > > > > >> have
>> > > > >> > > > > > >> > > been updated by creating or modifying entities
>> > > through
>> > > > >> the
>> > > > >> > > > > > management
>> > > > >> > > > > > >> > > functions). The broker ships with a default
>> > initial
>> > > > >> config
>> > > > >> > > > which
>> > > > >> > > > > is
>> > > > >> > > > > > >> > > contained within its jar files, however we allow
>> > > people
>> > > > >> to
>> > > > >> > > > provide
>> > > > >> > > > > > >> there
>> > > > >> > > > > > >> > > own. Records in the config file a copied
>> verbatim
>> > > into
>> > > > >> the
>> > > > >> > > > config
>> > > > >> > > > > > >> store
>> > > > >> > > > > > >> > -
>> > > > >> > > > > > >> > > the only difference being that ids are generated
>> > for
>> > > > each
>> > > > >> > > > entity.
>> > > > >> > > > > > The
>> > > > >> > > > > > >> > > interpolation from property names to values is
>> done
>> > > > each
>> > > > >> > time
>> > > > >> > > > the
>> > > > >> > > > > > >> broker
>> > > > >> > > > > > >> > > reads the config. If the broker finds there is
>> > > config
>> > > > in
>> > > > >> > the
>> > > > >> > > > > store
>> > > > >> > > > > > >> path
>> > > > >> > > > > > >> > > then it completely ignores the initial config -
>> it
>> > > does
>> > > > >> not
>> > > > >> > > > > examine
>> > > > >> > > > > > >> any
>> > > > >> > > > > > >> > > differences.
>> > > > >> > > > > > >> > >
>> > > > >> > > > > > >> > > Are you looking to start a completely fresh
>> broker
>> > > each
>> > > > >> > time,
>> > > > >> > > or
>> > > > >> > > > > > >> merely
>> > > > >> > > > > > >> > to
>> > > > >> > > > > > >> > > be able to change certain properties (such as
>> port
>> > > > >> numbers)
>> > > > >> > on
>> > > > >> > > > > each
>> > > > >> > > > > > >> > > restart? If you do not want to retain any
>> changes
>> > to
>> > > > the
>> > > > >> > > broker
>> > > > >> > > > > > >> > > configuration made while the broker is actually
>> > > > running,
>> > > > >> > then
>> > > > >> > > > you
>> > > > >> > > > > > >> could
>> > > > >> > > > > > >> > use
>> > > > >> > > > > > >> > > a "memory" config store rather than a Json
>> one. If
>> > > you
>> > > > >> want
>> > > > >> > > to
>> > > > >> > > > > > retain
>> > > > >> > > > > > >> > any
>> > > > >> > > > > > >> > > changes made through management, but desire the
>> > > ability
>> > > > >> to
>> > > > >> > > > change
>> > > > >> > > > > > >> certain
>> > > > >> > > > > > >> > > properties (like ports) on each startup, then
>> you
>> > > don't
>> > > > >> need
>> > > > >> > > to
>> > > > >> > > > > > worry
>> > > > >> > > > > > >> > about
>> > > > >> > > > > > >> > > the fact that the initial configuration is only
>> > > loaded
>> > > > >> the
>> > > > >> > > first
>> > > > >> > > > > > time
>> > > > >> > > > > > >> -
>> > > > >> > > > > > >> > you
>> > > > >> > > > > > >> > > just need to pass in the property values you
>> want
>> > on
>> > > > >> > startup.
>> > > > >> > > > > > >> > >
>> > > > >> > > > > > >> > > In terms of an example system properties file...
>> > The
>> > > > >> > default
>> > > > >> > > > > > >> > > initial-config.json defines the amqp port to be
>> > > > >> > > > ${qpid.amqp_port}
>> > > > >> > > > > > and
>> > > > >> > > > > > >> the
>> > > > >> > > > > > >> > > http port to run on ${qpid.http_port}, so if I
>> > > create a
>> > > > >> > > > properties
>> > > > >> > > > > > >> file
>> > > > >> > > > > > >> > > called rob.properties which contains
>> > > > >> > > > > > >> > >
>> > > > >> > > > > > >> > > qpid.http_port=8888
>> > > > >> > > > > > >> > > qpid.amqp_port=5555
>> > > > >> > > > > > >> > >
>> > > > >> > > > > > >> > > and then run qpid with the argument -props
>> > > > rob.properties
>> > > > >> > > then I
>> > > > >> > > > > > >> get...
>> > > > >> > > > > > >> > >
>> > > > >> > > > > > >> > > [Broker] BRK-1002 : Starting : Listening on TCP
>> > port
>> > > > 5555
>> > > > >> > > > > > >> > > [Broker] MNG-1001 : Web Management Startup
>> > > > >> > > > > > >> > > [Broker] MNG-1002 : Starting : HTTP : Listening
>> on
>> > > TCP
>> > > > >> port
>> > > > >> > > 8888
>> > > > >> > > > > > >> > >
>> > > > >> > > > > > >> > >
>> > > > >> > > > > > >> > > So, when you use your initial or stored config
>> you
>> > > just
>> > > > >> need
>> > > > >> > > to
>> > > > >> > > > > > ensure
>> > > > >> > > > > > >> > all
>> > > > >> > > > > > >> > > the variables you use in your config are set in
>> > your
>> > > > >> > > properties
>> > > > >> > > > > file
>> > > > >> > > > > > >> > (some
>> > > > >> > > > > > >> > > properties have defaults within the code if they
>> > are
>> > > > not
>> > > > >> > > > otherwise
>> > > > >> > > > > > >> set -
>> > > > >> > > > > > >> > > e.g. qpid.amqp_port will default to 5672 if it
>> is
>> > not
>> > > > set
>> > > > >> > > > > > elsewhere).
>> > > > >> > > > > > >> > >
>> > > > >> > > > > > >> > > Hope this helps,
>> > > > >> > > > > > >> > > Rob
>> > > > >> > > > > > >> > >
>> > > > >> > > > > > >> > > On 8 April 2016 at 00:41, rammohan ganapavarapu
>> <
>> > > > >> > > > > > >> rammohanga...@gmail.com
>> > > > >> > > > > > >> > >
>> > > > >> > > > > > >> > > wrote:
>> > > > >> > > > > > >> > >
>> > > > >> > > > > > >> > > > Rob,
>> > > > >> > > > > > >> > > >
>> > > > >> > > > > > >> > > > Thank you, one more question on -icp and -sp,
>> so
>> > > what
>> > > > >> if i
>> > > > >> > > > have
>> > > > >> > > > > > >> updated
>> > > > >> > > > > > >> > > icp
>> > > > >> > > > > > >> > > > with some property change and restarted
>> broker
>> > > with
>> > > > >> icp
>> > > > >> > > > (every
>> > > > >> > > > > > >> time i
>> > > > >> > > > > > >> > > > restart broker i am using initial config
>> > > > >> > > > > > >> > > > "/opt/qpid-java-broker/bin/qpid-server -icp
>> > > > >> > > > > > >> > > > /opt/qpid-java-broker/etc/config.json" not
>> sure
>> > if
>> > > > >> its is
>> > > > >> > > > right
>> > > > >> > > > > > way
>> > > > >> > > > > > >> or
>> > > > >> > > > > > >> > > > not), does it automatically update config
>> file in
>> > > > -sp?
>> > > > >> i
>> > > > >> > my
>> > > > >> > > > case
>> > > > >> > > > > > it
>> > > > >> > > > > > >> did
>> > > > >> > > > > > >> > > not
>> > > > >> > > > > > >> > > > updated the config file in store-path upon
>> > restart.
>> > > > >> What
>> > > > >> > > will
>> > > > >> > > > > > >> happened
>> > > > >> > > > > > >> > > if i
>> > > > >> > > > > > >> > > > have differences in initial config file that i
>> > use
>> > > to
>> > > > >> > start
>> > > > >> > > > > broker
>> > > > >> > > > > > >> and
>> > > > >> > > > > > >> > > the
>> > > > >> > > > > > >> > > > config file under store-path?
>> > > > >> > > > > > >> > > >
>> > > > >> > > > > > >> > > > Thanks,
>> > > > >> > > > > > >> > > > Ram
>> > > > >> > > > > > >> > > >
>> > > > >> > > > > > >> > > > On Thu, Apr 7, 2016 at 3:59 PM, Rob Godfrey <
>> > > > >> > > > > > >> rob.j.godf...@gmail.com>
>> > > > >> > > > > > >> > > > wrote:
>> > > > >> > > > > > >> > > >
>> > > > >> > > > > > >> > > > > This looks like a client error to me... the
>> > line
>> > > > >> which
>> > > > >> > > says:
>> > > > >> > > > > > >> > > > >
>> > > > >> > > > > > >> > > > > Client restricted itself to : PLAIN
>> > > > >> > > > > > >> > > > >
>> > > > >> > > > > > >> > > > > Out of interest what happens if you remove
>> the
>> > > > >> > > > > > >> > &sasl_mechs='ANONYMOUS'
>> > > > >> > > > > > >> > > > from
>> > > > >> > > > > > >> > > > > your connection URL? Without any sort of
>> > > > restriction
>> > > > >> > I'd
>> > > > >> > > > > expect
>> > > > >> > > > > > >> the
>> > > > >> > > > > > >> > > > client
>> > > > >> > > > > > >> > > > > to do the right thing.
>> > > > >> > > > > > >> > > > >
>> > > > >> > > > > > >> > > > > I need to get to sleep now (1am here :-)
>> )...
>> > > I'll
>> > > > >> have
>> > > > >> > > > deeper
>> > > > >> > > > > > >> look
>> > > > >> > > > > > >> > in
>> > > > >> > > > > > >> > > > the
>> > > > >> > > > > > >> > > > > morning.
>> > > > >> > > > > > >> > > > >
>> > > > >> > > > > > >> > > > > -- Rob
>> > > > >> > > > > > >> > > > >
>> > > > >> > > > > > >> > > > > On 7 April 2016 at 23:51, rammohan
>> > ganapavarapu <
>> > > > >> > > > > > >> > > rammohanga...@gmail.com
>> > > > >> > > > > > >> > > > >
>> > > > >> > > > > > >> > > > > wrote:
>> > > > >> > > > > > >> > > > >
>> > > > >> > > > > > >> > > > > > Rob,
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > > > > >> > > > > > thanks for the explanation, do you have a
>> > > sample
>> > > > >> > > > > > >> > > > > --system-properties-file?
>> > > > >> > > > > > >> > > > > > that i can take a look?
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > > > > >> > > > > > Also i just tried 6.0.1 but my client/app
>> is
>> > > > >> throwing
>> > > > >> > > this
>> > > > >> > > > > > >> error, i
>> > > > >> > > > > > >> > > am
>> > > > >> > > > > > >> > > > > not
>> > > > >> > > > > > >> > > > > > a developer, i am ops guy and i dont want
>> to
>> > > > change
>> > > > >> > the
>> > > > >> > > > > > existing
>> > > > >> > > > > > >> > code
>> > > > >> > > > > > >> > > > but
>> > > > >> > > > > > >> > > > > > wanted to make java qpid work. This is the
>> > > error
>> > > > i
>> > > > >> am
>> > > > >> > > > > getting
>> > > > >> > > > > > >> with
>> > > > >> > > > > > >> > > > > 6.0.1v..
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > > > > >> > > > > > 2016-04-07 22:32:36,726
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > QPIDConnectionManager-80478ba7-b31e-483a-823e-f726104ac1db
>> > > > >> > > > > > ERROR
>> > > > >> > > > > > >> > > > > > S.QUEUECLIENTSERVICE -
>> > > > >> > ConnectionImpl.openConnection() :
>> > > > >> > > > > Error
>> > > > >> > > > > > >> > > > connecting
>> > > > >> > > > > > >> > > > > > to Connection : 0 Host = qphost01
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > > > > >> > > > >
>> > > > >> > > > > > >> > > >
>> > > > >> > > > > > >> > >
>> > > > >> > > > > > >> >
>> > > > >> > > > > > >>
>> > > > >> > > > > >
>> > > > >> > > > >
>> > > > >> > > >
>> > > > >> > >
>> > > > >> > url=amqp://null:********@qphost011460067563391/?
>> > > > >> brokerlist='tcp://localhost:5672?connecttimeout='5000'&
>> > > > >> sasl_mechs='ANONYMOUS''
>> > > > >> > > > > > >> > > > > > error Unknown virtualhost '' username=null
>> > > > >> > > > > > >> > > > > > 2016-04-07 22:32:36,731
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > QPIDConnectionManager-80478ba7-b31e-483a-823e-f726104ac1db
>> > > > >> > > > > > ERROR
>> > > > >> > > > > > >> > > > > > S.QUEUECLIENTSERVICE -
>> > > > >> > ConnectionImpl.openConnection() :
>> > > > >> > > > > Error
>> > > > >> > > > > > >> > > > connecting
>> > > > >> > > > > > >> > > > > > to Connection : 0 Host = qphost01
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > > > > >> > > > >
>> > > > >> > > > > > >> > > >
>> > > > >> > > > > > >> > >
>> > > > >> > > > > > >> >
>> > > > >> > > > > > >>
>> > > > >> > > > > >
>> > > > >> > > > >
>> > > > >> > > >
>> > > > >> > >
>> > > > >> > url=amqp://null:********@qphost011460067563391/?
>> > > > >> brokerlist='tcp://localhost:5672?connecttimeout='5000'&
>> > > > >> sasl_mechs='ANONYMOUS''
>> > > > >> > > > > > >> > > > > > error Client and broker have no SASL
>> > mechanisms
>> > > > in
>> > > > >> > > common.
>> > > > >> > > > > > >> Broker
>> > > > >> > > > > > >> > > > allows
>> > > > >> > > > > > >> > > > > :
>> > > > >> > > > > > >> > > > > > ANONYMOUS Client has : [EXTERNAL, GSSAPI,
>> > > > >> > > CRAM-MD5-HASHED,
>> > > > >> > > > > > >> > CRAM-MD5,
>> > > > >> > > > > > >> > > > > > AMQPLAIN, PLAIN, ANONYMOUS] Client
>> restricted
>> > > > >> itself
>> > > > >> > to
>> > > > >> > > :
>> > > > >> > > > > > PLAIN
>> > > > >> > > > > > >> > > > > > username=guest
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > > > > >> > > > > > And here is my sasl mechanism.
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > > > > >> > > > > > curl -s 0:10001/service/sasl
>> > > > >> > > > > > >> > > > > > {
>> > > > >> > > > > > >> > > > > > "user" : "ANONYMOUS",
>> > > > >> > > > > > >> > > > > > "mechanisms" : [ "ANONYMOUS" ]
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > > > > >> > > > > > Same SASL with 0.28 works fine with my app
>> > but
>> > > > >> 6.0.1
>> > > > >> > is
>> > > > >> > > > not
>> > > > >> > > > > > >> > working.
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > > > > >> > > > > > Thanks,
>> > > > >> > > > > > >> > > > > > Ram
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > > > > >> > > > > > On Thu, Apr 7, 2016 at 3:39 PM, Rob
>> Godfrey <
>> > > > >> > > > > > >> > rob.j.godf...@gmail.com
>> > > > >> > > > > > >> > > >
>> > > > >> > > > > > >> > > > > > wrote:
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > > > > >> > > > > > > On 7 April 2016 at 23:16, rammohan
>> > > > ganapavarapu <
>> > > > >> > > > > > >> > > > > rammohanga...@gmail.com
>> > > > >> > > > > > >> > > > > > >
>> > > > >> > > > > > >> > > > > > > wrote:
>> > > > >> > > > > > >> > > > > > >
>> > > > >> > > > > > >> > > > > > > > Rob,
>> > > > >> > > > > > >> > > > > > > >
>> > > > >> > > > > > >> > > > > > > > Does v6.0.1 support Anonymous or no
>> > > > >> > authentication?
>> > > > >> > > > last
>> > > > >> > > > > > >> time
>> > > > >> > > > > > >> > > when
>> > > > >> > > > > > >> > > > i
>> > > > >> > > > > > >> > > > > > try
>> > > > >> > > > > > >> > > > > > > to
>> > > > >> > > > > > >> > > > > > > > use .32 it was not working with
>> > Anonymous.
>> > > > >> > > > > > >> > > > > > > >
>> > > > >> > > > > > >> > > > > > >
>> > > > >> > > > > > >> > > > > > > Yes, Anonymous is supported. Which AMQP
>> > > > protocol
>> > > > >> > are
>> > > > >> > > > you
>> > > > >> > > > > > >> using
>> > > > >> > > > > > >> > > > (0-9-1,
>> > > > >> > > > > > >> > > > > > > 0-10, or 1.0)... I would expect that
>> > > Anonymous
>> > > > >> > should
>> > > > >> > > > work
>> > > > >> > > > > > on
>> > > > >> > > > > > >> > 0.32
>> > > > >> > > > > > >> > > > > > however
>> > > > >> > > > > > >> > > > > > > I think in 0.32 the "no authentication
>> > layer
>> > > at
>> > > > >> all"
>> > > > >> > > > > option
>> > > > >> > > > > > >> for
>> > > > >> > > > > > >> > > AMQP
>> > > > >> > > > > > >> > > > > 1.0
>> > > > >> > > > > > >> > > > > > > probably didn't work (this is different
>> to
>> > an
>> > > > >> > > > > authentication
>> > > > >> > > > > > >> > layer
>> > > > >> > > > > > >> > > > > which
>> > > > >> > > > > > >> > > > > > > allows anonymous).
>> > > > >> > > > > > >> > > > > > >
>> > > > >> > > > > > >> > > > > > >
>> > > > >> > > > > > >> > > > > > > >
>> > > > >> > > > > > >> > > > > > > > Sorry i was not clear in my previous
>> > > email, i
>> > > > >> was
>> > > > >> > > > taking
>> > > > >> > > > > > >> about
>> > > > >> > > > > > >> > > > > > properties
>> > > > >> > > > > > >> > > > > > > > file not broker storage format, the
>> use
>> > > case
>> > > > is
>> > > > >> > if i
>> > > > >> > > > > > wanted
>> > > > >> > > > > > >> to
>> > > > >> > > > > > >> > > > > override
>> > > > >> > > > > > >> > > > > > > > some of these properties and i have my
>> > own
>> > > > >> custom
>> > > > >> > > > > > >> tool/script
>> > > > >> > > > > > >> > > that
>> > > > >> > > > > > >> > > > > > goes
>> > > > >> > > > > > >> > > > > > > > through the properties files and
>> replace
>> > > with
>> > > > >> the
>> > > > >> > > > > > override i
>> > > > >> > > > > > >> > > > defined,
>> > > > >> > > > > > >> > > > > > so
>> > > > >> > > > > > >> > > > > > > i
>> > > > >> > > > > > >> > > > > > > > want to use the same tool/script for
>> qpid
>> > > > >> config
>> > > > >> > as
>> > > > >> > > > > well.
>> > > > >> > > > > > My
>> > > > >> > > > > > >> > tool
>> > > > >> > > > > > >> > > > > only
>> > > > >> > > > > > >> > > > > > > > support key:value but if we have json
>> > array
>> > > > it
>> > > > >> > wont
>> > > > >> > > > > work.
>> > > > >> > > > > > So
>> > > > >> > > > > > >> > if i
>> > > > >> > > > > > >> > > > > want
>> > > > >> > > > > > >> > > > > > to
>> > > > >> > > > > > >> > > > > > > > pass overrides as "-prop" command
>> line
>> > > > >> arguments
>> > > > >> > > what
>> > > > >> > > > > are
>> > > > >> > > > > > >> the
>> > > > >> > > > > > >> > > > > > properties
>> > > > >> > > > > > >> > > > > > > > that java qpid support as command
>> line?
>> > > > >> > > > > > >> > > > > > > >
>> > > > >> > > > > > >> > > > > > > > Below if my config, is it possible to
>> > pass
>> > > > all
>> > > > >> > these
>> > > > >> > > > as
>> > > > >> > > > > > >> command
>> > > > >> > > > > > >> > > > line
>> > > > >> > > > > > >> > > > > > > > arguments?
>> > > > >> > > > > > >> > > > > > > >
>> > > > >> > > > > > >> > > > > > > > {
>> > > > >> > > > > > >> > > > > > > > "authenticationproviders" : [ {
>> > > > >> > > > > > >> > > > > > > > "id" : "7050933f-3485-4866-95d2-
>> > > > >> 1f1b258ea3ac",
>> > > > >> > > > > > >> > > > > > > > "name" : "Anonymous",
>> > > > >> > > > > > >> > > > > > > > "type" : "Anonymous"
>> > > > >> > > > > > >> > > > > > > > } ],
>> > > > >> > > > > > >> > > > > > > > "defaultVirtualHost" : "default",
>> > > > >> > > > > > >> > > > > > > > "id" : "c433a66c-e6dc-4c48-be01-
>> > > > >> 268295f580bc",
>> > > > >> > > > > > >> > > > > > > > "modelVersion" : "1.3",
>> > > > >> > > > > > >> > > > > > > > "name" : "Broker",
>> > > > >> > > > > > >> > > > > > > > "plugins" : [ {
>> > > > >> > > > > > >> > > > > > > > "id" : "58889cb7-9b9b-4866-bab2-
>> > > > >> 4cfd63266dbf",
>> > > > >> > > > > > >> > > > > > > > "name" : "httpManagement",
>> > > > >> > > > > > >> > > > > > > > "pluginType" : "MANAGEMENT-HTTP"
>> > > > >> > > > > > >> > > > > > > > }, {
>> > > > >> > > > > > >> > > > > > > > "id" : "67282f5e-ebab-4341-9ff5-
>> > > > >> 27a58fd2df89",
>> > > > >> > > > > > >> > > > > > > > "name" : "jmxManagement",
>> > > > >> > > > > > >> > > > > > > > "pluginType" : "MANAGEMENT-JMX"
>> > > > >> > > > > > >> > > > > > > > } ],
>> > > > >> > > > > > >> > > > > > > > "ports" : [ {
>> > > > >> > > > > > >> > > > > > > > "authenticationProvider" :
>> > "Anonymous",
>> > > > >> > > > > > >> > > > > > > > "id" : "99e13356-080a-4abe-852e-
>> > > > >> 8c452149cdae",
>> > > > >> > > > > > >> > > > > > > > "name" : "JMX_CONNECTOR",
>> > > > >> > > > > > >> > > > > > > > "port" : "9099",
>> > > > >> > > > > > >> > > > > > > > "protocols" : [ "JMX_RMI" ]
>> > > > >> > > > > > >> > > > > > > > }, {
>> > > > >> > > > > > >> > > > > > > > "authenticationProvider" :
>> > "Anonymous",
>> > > > >> > > > > > >> > > > > > > > "id" : "12813407-62ae-429f-8bee-
>> > > > >> 75802f3b6553",
>> > > > >> > > > > > >> > > > > > > > "name" : "RMI_REGISTRY",
>> > > > >> > > > > > >> > > > > > > > "port" : "8999",
>> > > > >> > > > > > >> > > > > > > > "protocols" : [ "RMI" ]
>> > > > >> > > > > > >> > > > > > > > }, {
>> > > > >> > > > > > >> > > > > > > > "authenticationProvider" :
>> > "Anonymous",
>> > > > >> > > > > > >> > > > > > > > "id" : "3b107675-edd7-40a3-86c2-
>> > > > >> 3113b46157f9",
>> > > > >> > > > > > >> > > > > > > > "name" : "AMQP",
>> > > > >> > > > > > >> > > > > > > > "port" : "5672"
>> > > > >> > > > > > >> > > > > > > > }, {
>> > > > >> > > > > > >> > > > > > > > "authenticationProvider" :
>> > "Anonymous",
>> > > > >> > > > > > >> > > > > > > > "id" : "6dff5ecf-1a4b-46ad-b93d-
>> > > > >> f2606b5e4f6e",
>> > > > >> > > > > > >> > > > > > > > "name" : "HTTP",
>> > > > >> > > > > > >> > > > > > > > "port" : "10001",
>> > > > >> > > > > > >> > > > > > > > "protocols" : [ "HTTP" ]
>> > > > >> > > > > > >> > > > > > > > } ],
>> > > > >> > > > > > >> > > > > > > > "storeVersion" : 1,
>> > > > >> > > > > > >> > > > > > > > "virtualhosts" : [ {
>> > > > >> > > > > > >> > > > > > > > "createdTime" : 1439482250329,
>> > > > >> > > > > > >> > > > > > > > "id" : "eef20ba0-33d3-4b37-93a7-
>> > > > >> fe2b34e54503",
>> > > > >> > > > > > >> > > > > > > > "name" : "default",
>> > > > >> > > > > > >> > > > > > > > "storePath" :
>> > > "/ebs//derbystore/default",
>> > > > >> > > > > > >> > > > > > > > "storeType" : "DERBY",
>> > > > >> > > > > > >> > > > > > > > "type" : "STANDARD"
>> > > > >> > > > > > >> > > > > > > > } ]
>> > > > >> > > > > > >> > > > > > > > }
>> > > > >> > > > > > >> > > > > > > >
>> > > > >> > > > > > >> > > > > > > >
>> > > > >> > > > > > >> > > > > > > >
>> > > > >> > > > > > >> > > > > > > In 6.0 you can replace any value in the
>> > JSON
>> > > > >> with a
>> > > > >> > > > > > reference
>> > > > >> > > > > > >> to
>> > > > >> > > > > > >> > a
>> > > > >> > > > > > >> > > > > > > property, for example
>> > > > >> > > > > > >> > > > > > >
>> > > > >> > > > > > >> > > > > > > "name" : "${myPortName}",
>> > > > >> > > > > > >> > > > > > >
>> > > > >> > > > > > >> > > > > > > this will then interpolate the value
>> from
>> > the
>> > > > >> > > property,
>> > > > >> > > > so
>> > > > >> > > > > > if
>> > > > >> > > > > > >> you
>> > > > >> > > > > > >> > > set
>> > > > >> > > > > > >> > > > > the
>> > > > >> > > > > > >> > > > > > > property myPortName to "RobsPort" that
>> will
>> > > be
>> > > > >> the
>> > > > >> > > value
>> > > > >> > > > > > used.
>> > > > >> > > > > > >> > > Type
>> > > > >> > > > > > >> > > > > > > conversions will be performed, so if the
>> > > > required
>> > > > >> > > value
>> > > > >> > > > is
>> > > > >> > > > > > an
>> > > > >> > > > > > >> > > integer
>> > > > >> > > > > > >> > > > > it
>> > > > >> > > > > > >> > > > > > > will convert to an integer. If the
>> value
>> > > > >> required
>> > > > >> > is
>> > > > >> > > a
>> > > > >> > > > > list
>> > > > >> > > > > > >> then
>> > > > >> > > > > > >> > > you
>> > > > >> > > > > > >> > > > > can
>> > > > >> > > > > > >> > > > > > > use a String representation of a list in
>> > Json
>> > > > >> > format.
>> > > > >> > > > > > >> > > > > > >
>> > > > >> > > > > > >> > > > > > > You can set the properties
>> individually, or
>> > > you
>> > > > >> can
>> > > > >> > > pass
>> > > > >> > > > > in
>> > > > >> > > > > > a
>> > > > >> > > > > > >> > > > > properties
>> > > > >> > > > > > >> > > > > > > file using -props or
>> > --system-properties-file
>> > > > >> (so if
>> > > > >> > > you
>> > > > >> > > > > > have
>> > > > >> > > > > > >> a
>> > > > >> > > > > > >> > > > > > properties
>> > > > >> > > > > > >> > > > > > > file already maybe you can just pass
>> this
>> > > in).
>> > > > >> > > > > > >> > > > > > >
>> > > > >> > > > > > >> > > > > > >
>> > > > >> > > > > > >> > > > > > > > One more question or may be
>> clarification
>> > > is,
>> > > > >> > > > > > >> > > > > > > >
>> > > > >> > > > > > >> > > > > > > >
>> > > > >> > > > > > >> > > > > > > > *-sp (--store-path) is the path of
>> config
>> > > > file
>> > > > >> > that
>> > > > >> > > > will
>> > > > >> > > > > > >> > > generated
>> > > > >> > > > > > >> > > > by
>> > > > >> > > > > > >> > > > > > > qpidd
>> > > > >> > > > > > >> > > > > > > > from the initial config right? what is
>> > the
>> > > > use
>> > > > >> of
>> > > > >> > > > > > >> store-path?*
>> > > > >> > > > > > >> > > > > > > >
>> > > > >> > > > > > >> > > > > > > >
>> > > > >> > > > > > >> > > > > > > That is correct. Some people just like
>> to
>> > > have
>> > > > >> > config
>> > > > >> > > > > files
>> > > > >> > > > > > >> in a
>> > > > >> > > > > > >> > > > > > > non-default location :-)
>> > > > >> > > > > > >> > > > > > >
>> > > > >> > > > > > >> > > > > > > Hope this helps,
>> > > > >> > > > > > >> > > > > > > Rob
>> > > > >> > > > > > >> > > > > > >
>> > > > >> > > > > > >> > > > > > >
>> > > > >> > > > > > >> > > > > > > > *Thanks,*
>> > > > >> > > > > > >> > > > > > > >
>> > > > >> > > > > > >> > > > > > > > *Ram*
>> > > > >> > > > > > >> > > > > > > >
>> > > > >> > > > > > >> > > > > > > > On Thu, Apr 7, 2016 at 3:02 PM, Rob
>> > > Godfrey <
>> > > > >> > > > > > >> > > > rob.j.godf...@gmail.com
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > > > > >> > > > > > > > wrote:
>> > > > >> > > > > > >> > > > > > > >
>> > > > >> > > > > > >> > > > > > > > > Firstly, 0.28 is quite old now - I
>> > would
>> > > > >> > recommend
>> > > > >> > > > > > >> updating
>> > > > >> > > > > > >> > to
>> > > > >> > > > > > >> > > > > v6.0.1
>> > > > >> > > > > > >> > > > > > > if
>> > > > >> > > > > > >> > > > > > > > > you can.
>> > > > >> > > > > > >> > > > > > > > >
>> > > > >> > > > > > >> > > > > > > > > Secondly I'm not sure I understand
>> your
>> > > > >> > question -
>> > > > >> > > > are
>> > > > >> > > > > > you
>> > > > >> > > > > > >> > > asking
>> > > > >> > > > > > >> > > > > > about
>> > > > >> > > > > > >> > > > > > > > > overriding particular properties, or
>> > the
>> > > > >> storage
>> > > > >> > > > > format
>> > > > >> > > > > > >> for
>> > > > >> > > > > > >> > the
>> > > > >> > > > > > >> > > > > > broker
>> > > > >> > > > > > >> > > > > > > > > configuration - these are two
>> different
>> > > > >> things.
>> > > > >> > > In
>> > > > >> > > > > > terms
>> > > > >> > > > > > >> of
>> > > > >> > > > > > >> > > > > > > properties /
>> > > > >> > > > > > >> > > > > > > > > context overrides this can be
>> specified
>> > > > >> using a
>> > > > >> > > > > > properties
>> > > > >> > > > > > >> > file
>> > > > >> > > > > > >> > > > (at
>> > > > >> > > > > > >> > > > > > > least
>> > > > >> > > > > > >> > > > > > > > > in v6 - I forget exactly how it
>> worked
>> > on
>> > > > >> 0.28).
>> > > > >> > > In
>> > > > >> > > > > > >> terms of
>> > > > >> > > > > > >> > > the
>> > > > >> > > > > > >> > > > > > > > > configuration, JSON is currently the
>> > only
>> > > > >> text
>> > > > >> > > based
>> > > > >> > > > > > >> format
>> > > > >> > > > > > >> > > > > > supported.
>> > > > >> > > > > > >> > > > > > > > You
>> > > > >> > > > > > >> > > > > > > > > can use a database for the broker
>> > config
>> > > > >> > storage,
>> > > > >> > > > > there
>> > > > >> > > > > > >> are
>> > > > >> > > > > > >> > > built
>> > > > >> > > > > > >> > > > > in
>> > > > >> > > > > > >> > > > > > > > > mechanisms to support Derby, BDB,
>> and
>> > > > generic
>> > > > >> > JDBC
>> > > > >> > > > > > config
>> > > > >> > > > > > >> > > stores.
>> > > > >> > > > > > >> > > > > > > > >
>> > > > >> > > > > > >> > > > > > > > > May I ask what advantage you would
>> get
>> > by
>> > > > >> using
>> > > > >> > > YAML
>> > > > >> > > > > or
>> > > > >> > > > > > >> > > > properties
>> > > > >> > > > > > >> > > > > > > files
>> > > > >> > > > > > >> > > > > > > > > instead of JSON?
>> > > > >> > > > > > >> > > > > > > > >
>> > > > >> > > > > > >> > > > > > > > > -- Rob
>> > > > >> > > > > > >> > > > > > > > >
>> > > > >> > > > > > >> > > > > > > > > On 7 April 2016 at 22:43, rammohan
>> > > > >> ganapavarapu
>> > > > >> > <
>> > > > >> > > > > > >> > > > > > > rammohanga...@gmail.com
>> > > > >> > > > > > >> > > > > > > > >
>> > > > >> > > > > > >> > > > > > > > > wrote:
>> > > > >> > > > > > >> > > > > > > > >
>> > > > >> > > > > > >> > > > > > > > > > Hi,
>> > > > >> > > > > > >> > > > > > > > > >
>> > > > >> > > > > > >> > > > > > > > > > Is there any way to start
>> > > qpid-java-0.28
>> > > > >> > broker
>> > > > >> > > > > using
>> > > > >> > > > > > >> > > > .properties
>> > > > >> > > > > > >> > > > > > > file
>> > > > >> > > > > > >> > > > > > > > or
>> > > > >> > > > > > >> > > > > > > > > > .xml or .yaml file instead of
>> .json
>> > > file?
>> > > > >> or
>> > > > >> > > what
>> > > > >> > > > > are
>> > > > >> > > > > > >> the
>> > > > >> > > > > > >> > > other
>> > > > >> > > > > > >> > > > > > ways
>> > > > >> > > > > > >> > > > > > > to
>> > > > >> > > > > > >> > > > > > > > > > pass override properties instead
>> of
>> > > JSON
>> > > > >> > config
>> > > > >> > > > > file?
>> > > > >> > > > > > >> > > > > > > > > >
>> > > > >> > > > > > >> > > > > > > > > >
>> > > > >> > > > > > >> > > > > > > > > > Thanks,
>> > > > >> > > > > > >> > > > > > > > > > Ram
>> > > > >> > > > > > >> > > > > > > > > >
>> > > > >> > > > > > >> > > > > > > > >
>> > > > >> > > > > > >> > > > > > > >
>> > > > >> > > > > > >> > > > > > >
>> > > > >> > > > > > >> > > > > >
>> > > > >> > > > > > >> > > > >
>> > > > >> > > > > > >> > > >
>> > > > >> > > > > > >> > >
>> > > > >> > > > > > >> >
>> > > > >> > > > > > >>
>> > > > >> > > > > > >
>> > > > >> > > > > > >
>> > > > >> > > > > >
>> > > > >> > > > >
>> > > > >> > > >
>> > > > >> > >
>> > > > >> >
>> > > > >>
>> > > > >
>> > > > >
>> > > >
>> > >
>> >
>>
>
>
