A USB3 port is  SuperSpeed port.

For a quick check, try

  lsusb -v | grep 5Gbps

to confirm you have at least 1 working USB3 port.

And then you can check the port speed where the device is connected
using lsusb -v.

-- Cinaed



On 3/18/20 7:36 AM, Rodolphe Bertolini via USRP-users wrote:
> Marcus,
> USB plug is rotated (from row is at top), but yes I get the exact same
> port as your.
> Thank you
> Regards,
> Rodolphe
>
> Le mer. 18 mars 2020 à 16:20, Marcus Müller via USRP-users
> <usrp-users@lists.ettus.com <mailto:usrp-users@lists.ettus.com>> a écrit :
>
>     Hi Rodolphe,
>
>     considering this is as confusing to me as to you: I took a picture
>     of my
>     USB3 port. When looking at an oblique angle at yours, do you see the
>     five front-row bronze/gold contacts shown in the attached photo?
>
>     Best regards,
>     Marcus
>
>     On 18.03.20 14:33, Rodolphe Bertolini via USRP-users wrote:
>     > Thanks to both of you.
>     >
>     > The port is black, but it has been working for few months until I
>     > shutdown / change session (I can't log back to previous session for
>     > reasons) so I believe that the port by itself isn't the bad guy.
>     >
>     > It keeps appearing as USB 2 ("high-speed") when I plug it and
>     also when
>     > I run uhd_find_devices
>     >
>     > @Cedric I made sure to plug at max both ends
>     >
>     > Thank you again
>     > Regards,
>     > Rodolphe
>     >
>     > Le mer. 18 mars 2020 à 15:02, Cedric Roux via USRP-users
>     > <usrp-users@lists.ettus.com <mailto:usrp-users@lists.ettus.com>
>     <mailto:usrp-users@lists.ettus.com
>     <mailto:usrp-users@lists.ettus.com>>> a écrit :
>     >
>     >     Hi,
>     >
>     >     be also sure to plug the cable firmly on both
>     >     ends. I've seen it more than once with a cable
>     >     "half-plugged" and then it becomes usb2, not usb3.
>     >
>     >     My 2 cents.
>     >
>     >     Regards,
>     >     Cédric.
>     >
>     >     On 3/18/20 2:54 PM, Marcus Müller via USRP-users wrote:
>     >     > Hi Rodolphe,
>     >     >
>     >     > first of all, check whether you're actually dealing with a
>     USB3
>     >     port. I
>     >     > know, sounds strange, but if it's not blue and doesn't
>     have more than
>     >     > four visible contacts, it's not standard-compliant USB3.
>     The fact that
>     >     > it's attached to a xHCI doesn't itself mean it can do USB3.
>     >     >
>     >     > Then, I can't quite remember whether the USB controller on
>     the B200
>     >     > would even register as USB3 before the initial firmware is
>     loaded. Try
>     >     > the following: In one terminal window, run `dmesg -Hwx`.
>     Plug in the
>     >     > USRP, and see how it appears on the bus (it seems, as USB2
>     high-speed
>     >     > device). After that, in another terminal, you'd run
>     >     `uhd_find_devices`,
>     >     > and see whether the device re-enumerates as USB3
>     SuperSpeed device.
>     >     >
>     >     > Best regards,
>     >     > Marcus
>     >     >
>     >     > On 18.03.20 13:43, Rodolphe Bertolini via USRP-users wrote:
>     >     >> Hello Ron, (I resend the email, I forgot to "reply to all")
>     >     >> Thank you for your quick feedback.
>     >     >>
>     >     >> Ok I understand. More information, lspci gives me :
>     >     >> 00:14.0 USB controller: Intel Corporation Cannon Lake PCH
>     USB 3.1
>     >     xHCI
>     >     >> Host Controller (rev 10)
>     >     >> So I don't get why doesn't Ubuntu enables USB 3.0 with
>     the B210.
>     >     >>
>     >     >> My problems looks like this one
>     >     >>
>     >   
>      
> http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2018-July/057323.html
>     >     >>
>     >     >> The output of lsusb -t is similar, with "Driver=(none)"
>     >     >> A message of above mentioned thread suggests to enable
>     3.0 option in
>     >     >> BIOS, however I don't have such option. And even if I had, I
>     >     didn't not
>     >     >> change anything between reboot / session switch so I
>     really don't
>     >     >> understand where this regression is coming from.
>     >     >> Also I did the "solution" mentioned by the author :
>     >     >>
>     >     >> uhd_image_loader --args="type=b200,reset"
>     >     >>
>     >     >>
>     >     >> Which did not improve the situation.
>     >     >>
>     >     >>
>     >     >> Thank you again
>     >     >>
>     >     >> Rodolphe
>     >     >>
>     >     >> Le mer. 18 mars 2020 à 12:02, Ron Economos via USRP-users
>     >     >> <usrp-users@lists.ettus.com
>     <mailto:usrp-users@lists.ettus.com>
>     <mailto:usrp-users@lists.ettus.com
>     <mailto:usrp-users@lists.ettus.com>>
>     >     <mailto:usrp-users@lists.ettus.com
>     <mailto:usrp-users@lists.ettus.com>
>     >     <mailto:usrp-users@lists.ettus.com
>     <mailto:usrp-users@lists.ettus.com>>>> a écrit :
>     >     >>
>     >     >>     dmesg should say "new SuperSpeed USB device number X
>     using
>     >     xhci_hcd"
>     >     >>     or "new SuperSpeed Gen 1 USB device number X using
>     xhci_hcd"
>     >     if you
>     >     >>     have a newer kernel.
>     >     >>
>     >     >>     "high-speed" means USB 2.0.
>     >     >>
>     >     >>     Ron
>     >     >>
>     >     >>     On 3/18/20 03:41, Rodolphe Bertolini via USRP-users
>     wrote:
>     >     >>>     Dear all,
>     >     >>>
>     >     >>>     I have been using a USRP B210 on a laptop for months
>     now. For
>     >     >>>     reasons, I switched to another Linux session, and
>     using this
>     >     >>>     session UHD fails to talk to B210 over USB 3.0
>     >     >>>
>     >     >>>     dmesg tells me it is using the xhci_hcd driver (which I
>     >     believe is
>     >     >>>     the driver for USB 3.0), and is also mentioning 
>     "new high-speed
>     >     >>>     USB", which leads me to think that USB 3.0 link is well
>     >     recognized
>     >     >>>     and active:
>     >     >>>
>     >     >>>     [  306.133028] usb 1-1: new high-speed USB device
>     number 16
>     >     using
>     >     >>>     xhci_hcd
>     >     >>>     [  306.260349] usb 1-1: New USB device found,
>     idVendor=2500,
>     >     >>>     idProduct=0020
>     >     >>>     [  306.260351] usb 1-1: New USB device strings: Mfr=1,
>     >     Product=2,
>     >     >>>     SerialNumber=3
>     >     >>>     [  306.260352] usb 1-1: Product: USRP B200
>     >     >>>     [  306.260354] usb 1-1: Manufacturer: Ettus Research LLC
>     >     >>>     [  306.260355] usb 1-1: SerialNumber: 31B9289
>     >     >>>
>     >     >>>     However, when running any uhd command line, it fails
>     using
>     >     USB 3.0:
>     >     >>>
>     >     >>>     [INFO] [UHD] linux; GNU C++ version 5.4.0 20160609;
>     >     Boost_105800;
>     >     >>>     UHD_3.15.0.0-release
>     >     >>>     [INFO] [B200] Detected Device: B210
>     >     >>>     [INFO] [B200] Operating over USB 2.
>     >     >>>
>     >     >>>     I have also tried with UHD 3.14.1, no improvement.
>     >     >>>
>     >     >>>     I remember having a similar issue (maybe the same?)
>     that had
>     >     been
>     >     >>>     solved with something related to udev, but I sadly
>     didn't
>     >     take any
>     >     >>>     note of this.
>     >     >>>
>     >     >>>     Do you have any hint?
>     >     >>>
>     >     >>>     Thank you.
>     >     >>>     Regards,
>     >     >>>     Rodolphe
>     >     >>>
>     >     >>>     _______________________________________________
>     >     >>>     USRP-users mailing list
>     >     >>>     USRP-users@lists.ettus.com
>     <mailto:USRP-users@lists.ettus.com>
>     >     <mailto:USRP-users@lists.ettus.com
>     <mailto:USRP-users@lists.ettus.com>>
>     >     <mailto:USRP-users@lists.ettus.com
>     <mailto:USRP-users@lists.ettus.com>
>     <mailto:USRP-users@lists.ettus.com
>     <mailto:USRP-users@lists.ettus.com>>>
>     >     >>>   
>     >   
>       http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>     >     >>     _______________________________________________
>     >     >>     USRP-users mailing list
>     >     >>     USRP-users@lists.ettus.com
>     <mailto:USRP-users@lists.ettus.com>
>     >     <mailto:USRP-users@lists.ettus.com
>     <mailto:USRP-users@lists.ettus.com>>
>     >     <mailto:USRP-users@lists.ettus.com
>     <mailto:USRP-users@lists.ettus.com>
>     <mailto:USRP-users@lists.ettus.com
>     <mailto:USRP-users@lists.ettus.com>>>
>     >     >>   
>     >   
>       http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>     >     >>
>     >     >>
>     >     >> _______________________________________________
>     >     >> USRP-users mailing list
>     >     >> USRP-users@lists.ettus.com
>     <mailto:USRP-users@lists.ettus.com>
>     <mailto:USRP-users@lists.ettus.com
>     <mailto:USRP-users@lists.ettus.com>>
>     >     >>
>     http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>     >     >>
>     >     >
>     >     > _______________________________________________
>     >     > USRP-users mailing list
>     >     > USRP-users@lists.ettus.com
>     <mailto:USRP-users@lists.ettus.com>
>     <mailto:USRP-users@lists.ettus.com
>     <mailto:USRP-users@lists.ettus.com>>
>     >     >
>     http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>     >     >
>     >
>     >
>     >     _______________________________________________
>     >     USRP-users mailing list
>     >     USRP-users@lists.ettus.com
>     <mailto:USRP-users@lists.ettus.com>
>     <mailto:USRP-users@lists.ettus.com
>     <mailto:USRP-users@lists.ettus.com>>
>     >   
>      http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>     >
>     >
>     > _______________________________________________
>     > USRP-users mailing list
>     > USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com>
>     > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>     >
>     _______________________________________________
>     USRP-users mailing list
>     USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com>
>     http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users@lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to