On 13/06/2024 10:14, Anabel Almodovar wrote:
Hi,
I am working with 2 USRP X310 equipped with TwinRx. They are connected
to a PC with Ubuntu 22.04 and UHD 4.1 via dual 10Gb port.
I am using the rx_sample_to_file.cpp example from UHD 4.5 version for
8 channel acquisition in continuous mode. I do acquisitions of 5' of
data continuously with a sample rate of 25MHz. At the beginning it
works correctly, but after a while (between 40'-50') it starts to
fail. First it gives overflows and then it gives the following error:
*[*/*ERROR] [X300] 192.168.40.2 <http://192.168.40.2>: x300 fw
communication failure #2
EnvironmentError: IOError: x300 fw poke32 - reply timed out
[ERROR] [X300] 192.168.60.2 <http://192.168.60.2>: x300 fw
communication failure #2
EnvironmentError: IOError: x300 fw poke32 - reply timed out
[ERROR] [X300] 192.168.40.2 <http://192.168.40.2>: x300 fw
communication failure #3
EnvironmentError: IOError: x300 fw poke32 - reply timed out
[ERROR] [X300] 192.168.60.2 <http://192.168.60.2>: x300 fw
communication failure #3
EnvironmentError: IOError: x300 fw poke32 - reply timed out
[ERROR] [UHD] An unexpected exception was caught in a task loop.The
task loop will now exit, things may not work.EnvironmentError:
IOError: 192.168.40.2 <http://192.168.40.2>: x300 fw communication
failure #3
EnvironmentError: IOError: x300 fw poke32 - reply timed out
[ERROR] [UHD] An unexpected exception was caught in a task loop.The
task loop will now exit, things may not work.EnvironmentError:
IOError: 192.168.60.2 <http://192.168.60.2>: x300 fw communication
failure #3
EnvironmentError: IOError: x300 fw poke32 - reply timed out*
/
Once this happens it is impossible to recover the system, it starts to
give the same error after 30''-40''. I have tried to let the USRP and
the PC rest for a while, even re-flashing the FPGA, but the error
persists. If I let the system rest for days the error disappears, but
I observe the same behavior again after those first 40'-50' minutes.
I don't know why this happens, nor how to solve it. Any indication?
Thank you in advance.
Regards,
Anabel
_______________________________________________
USRP-users mailing list --usrp-users@lists.ettus.com
To unsubscribe send an email tousrp-users-le...@lists.ettus.com
Is this happening on BOTH USRPs?
Have you followed this guide here for performance tuning?
https://kb.ettus.com/USRP_Host_Performance_Tuning_Tips_and_Tricks
I have an X310 with two TwinRX, on Ubuntu 22.04, UHD 4.1, and I can
stream literally for *days* without any issue
at all.
How are you connected to your X310s? If you only run one at a time, do
you see this failure?
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com