Instead of aligning the VASSAL grid to match your
scanned/drawn map, match the map's grid to one outputted
by VASSAL. I found that trying to get the hexgrid in
VASSAL to match the original map a nightmare. Using tools
in your graphics program, I found it's much easier to
skew/stretch/rotate/stretch the original map to match a
hexgrid that was produced in VASSAL first.
GJK
On Fri, 04 Aug 2006 22:21:54 -0000
"wolfwolf4242" <[EMAIL PROTECTED]> wrote:
> I have ben trying to put down a VASSAL hexgrid on to a
>map...lining
> it up and all that..with no luck :) No reasonable amount
>of map
> transformation will make it work. The upper left corner
>hex matches
> pretty well, but the rest is quite a ways off, and gets
>much worse
> going right across the map.
>
> Could this be a hex size issue? Or something with the
>'X' and 'Y'
> offsets?
>
> Thanks
>
> Jeff
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/vassalengine/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
