Frank Mehnert wrote:
On Thursday 25 October 2007, Lawrence Nitz wrote:
1. I installed using rpm -i
2. Probing the proc modules directory gives the following:
[EMAIL PROTECTED] Documents]# more /proc/modules |grep vboxdrv
vboxdrv 1646479 1 - Loading 0xffffffff88424000
Ah! That's indeed interesting. Could you post your kernel boot
messages (dmesg)?
And could you do the following: Disable the script in
/etc/rc.d/init.d/vboxdrv
by inserting a
return 0
at the start of that file. Then please reboot your machine
and try to load the vboxdrv.ko module manually by
modprobe vboxdrv
as root. What happens? Does modprobe returns successfully? Or are
there any error messages? dmesg?
Thanks,
Frank
------------------------------------------------------------------------
_______________________________________________
vbox-users mailing list
[email protected]
http://vbox.innotek.de/mailman/listinfo/vbox-users
Frank,
I took the following steps, as suggested:
1 Placed the expression return 0 in the first line of
/etc/rc.d/init.d/vboxdrv
2. rebooted
3 preserved the dmesg text, as attached
4. Attempted to use /sbin/modprobe vboxdrv to install vboxdrv
manually.
5. The program showed no cpu cycles in ps -ef for 5 minutes, so I
terminated it. There was no reponse or output.
Linux version 2.6.20-2936.fc7xen ([EMAIL PROTECTED]) (gcc version 4.1.2
20070502 (Red Hat 4.1.2-12)) #1 SMP Fri Sep 21 11:56:20 EDT 2007
Command line: ro root=/dev/md1 rhgb quiet
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000001f03e9000 (usable)
Entering add_active_range(0, 0, 2032617) 0 entries of 256 used
end_pfn_map = 2032617
DMI 2.4 present.
Entering add_active_range(0, 0, 2032617) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 2032617
DMA32 2032617 -> 2032617
Normal 2032617 -> 2032617
early_node_map[1] active PFN ranges
0: 0 -> 2032617
On node 0 totalpages: 2032617
DMA zone: 27789 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 2004828 pages, LIFO batch:31
DMA32 zone: 0 pages used for memmap
Normal zone: 0 pages used for memmap
ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fbb90
ACPI: RSDT (v001 NEC 0x04000724 MSFT 0x00000097) @
0x00000000cff80000
ACPI: FADT (v002 A_M_I_ OEMFACP 0x04000724 MSFT 0x00000097) @
0x00000000cff80200
ACPI: MADT (v001 A_M_I_ OEMAPIC 0x04000724 MSFT 0x00000097) @
0x00000000cff80390
ACPI: MCFG (v001 A_M_I_ OEMMCFG 0x04000724 MSFT 0x00000097) @
0x00000000cff80400
ACPI: SLIC (v001 NEC 0x04000724 MSFT 0x00000097) @
0x00000000cff80440
ACPI: OEMB (v001 A_M_I_ AMI_OEM 0x04000724 MSFT 0x00000097) @
0x00000000cff8e040
ACPI: HPET (v001 A_M_I_ OEMHPET 0x04000724 MSFT 0x00000097) @
0x00000000cff89200
ACPI: OSFR (v001 A_M_I_ OEMOSFR 0x04000724 MSFT 0x00000097) @
0x00000000cff89240
ACPI: DSDT (v001 A0812 A0812001 0x00000001 INTL 0x20060113) @
0x0000000000000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000)
PERCPU: Allocating 26240 bytes of per cpu data
Built 1 zonelists. Total pages: 2004828
Kernel command line: ro root=/dev/md1 rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 2405.522 MHz processor.
Console: colour VGA+ 80x50
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: ffff88000abc9000 - ffff88000ebc9000
Address size: 27 bits
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 7884792k/8130468k available (2226k kernel code, 236748k reserved, 1355k
data, 196k init)
Calibrating delay using timer specific routine.. 4812.78 BogoMIPS (lpj=9625569)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
SMP alternatives: switching to SMP code
Initializing CPU#1
Initializing CPU#2
Brought up 4 CPUs
sizeof(vma)=168 bytes
sizeof(page)=56 bytes
sizeof(inode)=768 bytes
sizeof(dentry)=224 bytes
sizeof(ext3inode)=1040 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=248 bytes
sizeof(task_struct)=1936 bytes
Initializing CPU#3
migration_cost=12
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 2 of device 0000:03:00.0
PCI: Cannot allocate resource region 3 of device 0000:03:00.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:06: ioport range 0x290-0x297 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: fc000000-fe8fffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: faf00000-faffffff
PCI: Bridge: 0000:00:1c.4
IO window: e000-efff
MEM window: fea00000-feafffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
IO window: d000-dfff
MEM window: fe900000-fe9fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: feb00000-febfffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 10092k freed
IA-32 Microcode Update Driver: v1.14a-xen <[EMAIL PROTECTED]>
audit: initializing netlink socket (disabled)
audit(1193387420.240:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU1PM]
[20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU2PM]
[20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU3PM]
[20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU4PM]
[20060707]
Real Time Clock Driver v1.12ac
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 196k freed
Write protecting the kernel read-only data: 942k
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 2-1: configuration #1 chosen from 1 choice
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbfff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
md: raid1 personality registered for level 1
raid5: automatically using best checksumming function: generic_sse
generic_sse: 5744.000 MB/sec
raid5: using function: generic_sse (5744.000 MB/sec)
raid6: int64x1 1914 MB/s
raid6: int64x2 2586 MB/s
usb 2-1: USB disconnect, address 2
raid6: int64x4 2286 MB/s
raid6: int64x8 1859 MB/s
raid6: sse2x1 3561 MB/s
raid6: sse2x2 3971 MB/s
raid6: sse2x4 6245 MB/s
raid6: using algorithm sse2x4 (6245 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
SCSI subsystem initialized
libata version 2.00 loaded.
ata_piix 0000:00:1f.2: version 2.00ac7
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xB000 ctl 0xAC02 bmdma 0xA480 irq 22
ata2: SATA max UDMA/133 cmd 0xA880 ctl 0xA802 bmdma 0xA488 irq 22
scsi0 : ata_piix
usb 7-3: new high speed USB device using ehci_hcd and address 2
ata1.00: ATA-7, max UDMA/133, 1465149168 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : ata_piix
usb 7-3: configuration #1 chosen from 1 choice
ata2.00: ATA-7, max UDMA/133, 1465149168 sectors: LBA48 NCQ (depth 0/32)
ata2.00: ata2: dev 0 multi count 16
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5
SCSI device sda: 1465149168 512-byte hdwr sectors (750156 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
SCSI device sda: 1465149168 512-byte hdwr sectors (750156 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
scsi 1:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5
SCSI device sdb: 1465149168 512-byte hdwr sectors (750156 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
SCSI device sdb: 1465149168 512-byte hdwr sectors (750156 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: Attached scsi disk sdb
ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ata3: SATA max UDMA/133 cmd 0xC000 ctl 0xBC02 bmdma 0xB480 irq 22
ata4: SATA max UDMA/133 cmd 0xB880 ctl 0xB802 bmdma 0xB488 irq 22
scsi2 : ata_piix
usb 7-6: new high speed USB device using ehci_hcd and address 3
usb 7-6: configuration #1 chosen from 1 choice
libusual: modprobe for usb-storage succeeded, but module is not present
ata3.00: ATAPI, max UDMA/100
usb 8-1: new high speed USB device using ehci_hcd and address 2
ata3.00: configured for UDMA/100
scsi3 : ata_piix
ATA: abnormal status 0x7F on port 0xB887
scsi 2:0:0:0: CD-ROM PHILIPS SPD2513P MP01 PQ: 0 ANSI: 5
usb 8-1: configuration #1 chosen from 1 choice
hiddev96: USB HID v1.10 Device [Western Digital External HDD] on
usb-0000:00:1d.7-1
libusual: modprobe for usb-storage succeeded, but module is not present
usb 6-1: new low speed USB device using uhci_hcd and address 2
usb 6-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input1
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-1
input: Logitech USB Receiver as /class/input/input2
input,hiddev97: USB HID v1.10 Mouse [Logitech USB Receiver] on
usb-0000:00:1d.2-1
PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.1 to 64
ata5: PATA max UDMA/100 cmd 0xEC00 ctl 0xE882 bmdma 0xE400 irq 17
ata6: PATA max UDMA/100 cmd 0xE800 ctl 0xE482 bmdma 0xE408 irq 17
scsi4 : pata_jmicron
ata5.00: ATA-6, max UDMA/100, 312581808 sectors: LBA48
ata5.01: ATAPI, max UDMA/33
ata5.00: configured for UDMA/100
ata5.01: configured for UDMA/33
scsi5 : pata_jmicron
ATA: abnormal status 0x7F on port 0xE807
scsi 4:0:0:0: Direct-Access ATA ST3160023A 8.01 PQ: 0 ANSI: 5
SCSI device sdc: 312581808 512-byte hdwr sectors (160042 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
SCSI device sdc: 312581808 512-byte hdwr sectors (160042 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sdc: sdc1 sdc2 < sdc5 > sdc3
sd 4:0:0:0: Attached scsi disk sdc
scsi 4:0:1:0: CD-ROM CREATIVE DVD-ROM DVD1241E 0.39 PQ: 0 ANSI: 5
ahci 0000:03:00.0: version 2.0
PCI: Device 0000:03:00.0 not available because of resource collisions
ahci: probe of 0000:03:00.0 failed with error -22
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED]
md: md1 stopped.
md: bind<sdb3>
md: bind<sda2>
raid1: raid set md1 active with 2 out of 2 mirrors
md: md2 stopped.
md: bind<sdb2>
md: bind<sda3>
raid1: raid set md2 active with 2 out of 2 mirrors
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1193387435.052:2): selinux=0 auid=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: Attached scsi generic sg2 type 5
sd 4:0:0:0: Attached scsi generic sg3 type 0
scsi 4:0:1:0: Attached scsi generic sg4 type 5
input: PC Speaker as /class/input/input3
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 v1.10 addr 0xfe9fc000 irq 17 Yukon-EC Ultra (0xb4) rev 2
sky2 eth0: addr 00:1b:fc:45:9a:9b
sr1: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray
sr 4:0:1:0: Attached scsi CD-ROM sr1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
8250_pnp: Unknown symbol serial8250_unregister_port
8250_pnp: Unknown symbol serial8250_register_port
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
Unable to handle kernel paging request at ffff83000020d110 RIP:
[<ffffffff88246145>] :kvm:preempt_notifier_sys_init+0x11/0x68
PGD 5555555555555027 BAD
Oops: 0001 [1] SMP
last sysfs file: /kernel/uevent_seqnum
CPU 0
Modules linked in: kvm snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss
snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm
snd_timer snd i2c_i801 soundcore sky2 i2c_core snd_page_alloc sr_mod serio_raw
serial_core cdrom pcspkr joydev sg dm_snapshot dm_zero dm_mirror dm_mod ahci
pata_jmicron ata_generic ata_piix libata sd_mod scsi_mod raid456 xor raid1 ext3
jbd mbcache ehci_hcd ohci_hcd uhci_hcd
Pid: 1443, comm: modprobe Not tainted 2.6.20-2936.fc7xen #1
RIP: e030:[<ffffffff88246145>] [<ffffffff88246145>]
:kvm:preempt_notifier_sys_init+0x11/0x68
RSP: e02b:ffff8801ee76de18 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff83000020d110
RDX: 0000000000000000 RSI: 000000001641305c RDI: ffffffff80538800
RBP: ffffffff88250bc0 R08: ffff8801ee706668 R09: 00000000882513c0
R10: ffffffff88247230 R11: 00000000882513c0 R12: ffffffff88251500
R13: ffff8801ef853ea0 R14: ffffc2000013e9b0 R15: ffffffff88251550
FS: 00002aaaaaad6250(0000) GS:ffffffff80580000(0000) knlGS:0000000000000000
CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 00000001ee8e2000 CR4: 0000000000002620
Process modprobe (pid: 1443, threadinfo ffff8801ee76c000, task ffff88000ecbb7d0)
Stack: 83000020d1000fff ffffffff8824ffff 0000000000000180 ffffffff881590ab
ffff8801ef853800 ffffffff88251500 ffff8801ef853800 ffffffff8029e794
ffff88000ecbb7d0 0000000000000034 ffffffff805d5780 00000000ee76de68
Call Trace:
[<ffffffff881590ab>] :kvm:kvm_init+0xab/0xc2
[<ffffffff8029e794>] sys_init_module+0x1785/0x18f2
[<ffffffff8025b106>] system_call+0x86/0x8b
[<ffffffff8025b080>] system_call+0x0/0x8b
Code: 48 8b 01 48 89 05 a1 d7 00 00 48 8b 41 08 48 89 05 9e d7 00
RIP [<ffffffff88246145>] :kvm:preempt_notifier_sys_init+0x11/0x68
RSP <ffff8801ee76de18>
CR2: ffff83000020d110
<3>BUG: sleeping function called from invalid context at kernel/rwsem.c:20
in_atomic():0, irqs_disabled():1
Call Trace:
[<ffffffff80296c5e>] down_read+0x15/0x23
[<ffffffff8029fbfd>] acct_collect+0x42/0x18e
[<ffffffff802156e3>] do_exit+0x200/0x809
[<ffffffff802630e5>] do_page_fault+0x1213/0x128d
[<ffffffff80236e4b>] __mutex_init+0x2b/0x4a
[<ffffffff80260837>] error_exit+0x0/0x79
[<ffffffff88246145>] :kvm:preempt_notifier_sys_init+0x11/0x68
[<ffffffff881590ab>] :kvm:kvm_init+0xab/0xc2
[<ffffffff8029e794>] sys_init_module+0x1785/0x18f2
[<ffffffff8025b106>] system_call+0x86/0x8b
[<ffffffff8025b080>] system_call+0x0/0x8b
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
floppy0: no floppy controllers found
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [PWRB]
No dock devices found.
ibm_acpi: ec object not found
md: md0 stopped.
md: bind<sdb1>
md: bind<sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on md1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.8)
Adding 32767992k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
across:32767992k
sky2 eth0: enabling interface
sky2 eth0: ram buffer 0K
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 10 Mbps, half duplex, flow control none
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit(1193387460.238:3): audit_pid=2324 old=0 by auid=4294967295
vmmon: module license 'unspecified' taints kernel.
/dev/vmmon[2514]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[2514]: Module vmmon: initialized
/dev/vmnet: open called by PID 2567 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-virbr0: peer interface virbr0 not found, will wait for it to come up
bridge-virbr0: attached
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
vboxdrv: Trying to deactivate the NMI watchdog permanently...
Unable to handle kernel paging request at ffffffffff5fd030 RIP:
[<ffffffff882670ca>] :vboxdrv:VBoxSupDrvInit+0xca/0x32f
PGD 203067 PUD 2f50067 PMD 2f51067 PTE 0
Oops: 0000 [2] SMP
last sysfs file: /class/misc/vmmon/dev
CPU 0
Modules linked in: vboxdrv autofs4 nf_conntrack_netbios_ns ipt_MASQUERADE
iptable_nat nf_nat iptable_mangle nf_conntrack_ipv4 xt_state nf_conntrack
nfnetlink ipt_REJECT iptable_filter ip_tables xt_tcpudp ip6t_REJECT
ip6table_filter ip6_tables x_tables hidp rfcomm l2cap bluetooth vmnet(P)
parport_pc parport vmmon(P) sunrpc fuse dm_multipath video sbs i2c_ec dock
button battery asus_acpi backlight ac ipv6 kvm snd_hda_intel snd_hda_codec
snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss
snd_mixer_oss snd_pcm snd_timer snd i2c_i801 soundcore sky2 i2c_core
snd_page_alloc sr_mod serio_raw serial_core cdrom pcspkr joydev sg dm_snapshot
dm_zero dm_mirror dm_mod ahci pata_jmicron ata_generic ata_piix libata sd_mod
scsi_mod raid456 xor raid1 ext3 jbd mbcache ehci_hcd ohci_hcd uhci_hcd
Pid: 2891, comm: modprobe Tainted: P 2.6.20-2936.fc7xen #1
RIP: e030:[<ffffffff882670ca>] [<ffffffff882670ca>]
:vboxdrv:VBoxSupDrvInit+0xca/0x32f
RSP: e02b:ffff8801e1829e38 EFLAGS: 00010286
RAX: 0000000000000041 RBX: ffffffff885b2100 RCX: ffffffff8052bc58
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff8052bc40
RBP: ffff8801e22b3800 R08: ffffffff8052bc58 R09: 0000000000000000
R10: ffffffff8061dcf0 R11: 0000000000000000 R12: ffffffff885b2100
R13: ffff8801e22b3ce8 R14: ffffc20001260200 R15: ffffffff885b2150
FS: 00002aaaaaad6250(0000) GS:ffffffff80580000(0000) knlGS:0000000000000000
CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 00000001e1866000 CR4: 0000000000002620
Process modprobe (pid: 2891, threadinfo ffff8801e1828000, task ffff8800000df7d0)
Stack: ffffffff885b2100 ffff8801e22b3800 ffffffff885b2100 ffffffff8029e794
ffff8800000df7d0 000000000000002a 0000000000000000 00000000e1829e68
0000000000000000 0000000000000000 0000000000000000 0000000000000000
Call Trace:
[<ffffffff8029e794>] sys_init_module+0x1785/0x18f2
[<ffffffff8025b2ff>] tracesys+0xb2/0xb7
Code: 8b 04 25 30 d0 5f ff a8 f0 74 3c c1 e8 10 3c 03 76 35 8b 14
RIP [<ffffffff882670ca>] :vboxdrv:VBoxSupDrvInit+0xca/0x32f
RSP <ffff8801e1829e38>
CR2: ffffffffff5fd030
<3>BUG: sleeping function called from invalid context at kernel/rwsem.c:20
in_atomic():0, irqs_disabled():1
Call Trace:
[<ffffffff80296c5e>] down_read+0x15/0x23
[<ffffffff8029fbfd>] acct_collect+0x42/0x18e
[<ffffffff802156e3>] do_exit+0x200/0x809
[<ffffffff802630e5>] do_page_fault+0x1213/0x128d
[<ffffffff802601b2>] _spin_unlock_irqrestore+0x9/0x52
[<ffffffff8029482f>] keventd_create_kthread+0x0/0x6a
[<ffffffff80260837>] error_exit+0x0/0x79
[<ffffffff882670ca>] :vboxdrv:VBoxSupDrvInit+0xca/0x32f
[<ffffffff882670ca>] :vboxdrv:VBoxSupDrvInit+0xca/0x32f
[<ffffffff8029e794>] sys_init_module+0x1785/0x18f2
[<ffffffff8025b2ff>] tracesys+0xb2/0xb7
eth0: no IPv6 routers present
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
Bridge firewalling registered
bridge-virbr0: enabling the bridge
bridge-virbr0: up
virbr0: no IPv6 routers present
eth0: no IPv6 routers present
_______________________________________________
vbox-users mailing list
[email protected]
http://vbox.innotek.de/mailman/listinfo/vbox-users
