Even before we go that far, has he checked through the 'obvious'?
Keep you cable length as short as you can, but keep the VCR away from the
computer's fan and hard drives. (Spinning motors, especially with long
and/or poor quality cable are a nono)
Go for a good quality shielded cable. When I'm dubbing, I generally use
Monster Cable's Monster Subwoofer. Six to eight feet and _VERY_ well
shielded.
Plug a decent reference into the VCR, any kind of composite monitor or
later-model TV should give you an idea if it's the tape quality, head
cleaning, head alignment, capstan, etc. I'd use the same cable and same
placement across the board so that you can see what's happening in real time
with the computer removed from the equation. Then you can relocate cables
and swap tapes, that kind of thing, in relative immunity.
Your thoughts?
--- Jodie Reynolds
Chief Technology Officer
Interact Devices, Inc.
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Eric Jorgensen
> Sent: Monday, May 14, 2001 2:51 PM
> To: [EMAIL PROTECTED]
> Subject: Re: [V4L] BT878 Digitizing from Videotape
>
>
> PCastro wrote:
>
> <Excellent explanation deleted to conserve sanity>
>
>
> I've heard from some that, above all this, VCRs are notorious for
> producing weak composite video signals.
>
> It may be worth your time to try one of the video signal
> amplifiers or
> "clarifiers" marketed to aid in the duplication of VHS tapes, but get it
> from some place that will let you return it if it doesn't make a
> difference.
>
> - Eric
>
>
>
> _______________________________________________
> Video4linux-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/video4linux-list
>
_______________________________________________
Video4linux-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/video4linux-list
