On Mar 21, 12:13 pm, Cyrus <[email protected]> wrote:
> I recently (today) got a Quadra 630. A very interesting mac...
> Anyways, I plugged it in, and pressed the power button. It chimed, and
> I could hear the fans, and HD spinning up. Then after about 5 seconds,
> it just stopped... Haven't been able to get anything out of it since.
> (no chime, no HD or fan activity whatsoever.) I replaced the Pram
> battery with a known working one, and pressed the red reset button.
> Still nothing. Anything more simple to try, or is it most likely that
> the motherboard or processor is just bad? I think I do have an extra
> 680040 processor around, but it looks like it's quite hard to take
> out. Anyways, any tips or suggestions would be welcome!
>
Also, what is you monitor set up ?
Another thing to consider is bad power supply.
If you replace mobo, there may be a powerpc one that will fit, try and
get the better power supply if you can.
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our
netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/vintage-macs?hl=en
Low End Mac RSS feed at feed://lowendmac.com/feed.xml
-~----------~----~----~----~------~----~------~--~---
