You can just buy 'em on amazon.com and mess of other places. http://www.amazon.com/GearWrench-80086-18-Inch-Long-Screwdriver/dp/B001M0O17A
Doug wrote: > The Torx is probably too short. What I did today was to buy about a 14 inch > long tool with a screw in the end. I took my no. 15 Torx and pounded the > handle off leaving a six inch piece. I then filed off the two tangs that > held it into the plastic handle an Voila, it fit perfectly into the end with > screws on. I tightened the screws and I had a Torx screwdriver about 20 > inches long and the screws came out with no problems. The tool I bought at > home Hardware cost me $9.99... > > Doug > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
