Ok I just had an idea after doing a bit searching. I found a ISA SCSI 
controller for use in a old PC on eBay for only $10. It even has a floppy 
drive connector. (Trying to get a mac floppy drive working on a PC would 
certainly be interesting. :P )

But I've read that HFVExplorer can access physical Macintosh disks if they 
are connected via said SCSI controller. Any thing I should know before I 
think about going this route? I have an old 200Mhz Compaq Presario 4508 
which has 3 ISA slots and one PCI slot. The PCI slot is currently occupied 
by a Eithernet adapter. This PC was collecting dust in my closet, so I 
pulled it out, threw a hard-drive into it and installed Windows 98. Since 
my router is right next to my main computer, I just ran an Eithernet cord 
to it and succesfully got it showing up on the network. I enabled file 
sharing in Windows 98 and can access the shared folders I set from my 
Windows 7 machine (amazing that old stuff still gets along with Win 7. : P 
) I can't seem to access any shared resources on my Win7 from the Win98 
machine. But that doesn't really matter. My Win7 machine can access it just 
fine so that works for me.

So my idea is to toss in a SCSI controller into this old PC. Once I get a 
hard-drive for my Macintosh SE, I can first plug that drive into this 
controller on the PC (after I had hunted down the drivers for it. This is 
the only part I'm worried about. I'll probably contact the seller about 
this before I buy it) and HFVExplorer should see it right?

I can then transfer all the stuff I have in my emulator directly to the 
drive from that program, then simply put the drive back into the Mac.

This method looks to be the cheapest method and simplest method (getting 
the drivers for the SCSI card would be the only hard-part) so I could go 
this route instead of trying to network a mac to my PC which sounds like I 
could run into issues like getting the correct cables and AppleTalk setup 
and what not.

Sorta off topic, but since the card I found has what appears to be a 
compatible floppy drive connector, It could be possible to format 800K Mac 
floppies with this thing on a PC? The MacSE I have is a SuperDrive, so it's 
not important I have this ability, but it would be interesting as this 
could be the only legit way one could write such floppies from a PC. Since 
before everyone has always said you had to use another classic Mac because 
the FDD based PC floppy drives can't handle the variable rotation speed 
formatted disks those 400K/800K Mac floppies used.

This is a photo of the card I'm thinking of getting:

http://www.battlefieldsingleplayer.com/apachethunder/Images/scsicard.jpg

Would someone happen to know where to find drivers for this? It would be 
great if I get that sorted out before I commit to buying it. :D

-- 
-- 
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our 
netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to vintage-macs@googlegroups.com
To leave this group, send email to vintage-macs+unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/vintage-macs

Support for older Macs: http://lowendmac.com/services/
--- 
You received this message because you are subscribed to the Google Groups 
"Vintage Macs" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to vintage-macs+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to