I'm using a Mac now to develop Atmel AVR 8 bit MCU 'c' code. This is on a MacMini (OS 10.6.8). Previously I did MC68HC11 assembly code. I don't recall how far back, Mac wise, I went but it was at the latest a G4.
There are assemblers for a number of CPUs available that run under OSX. I like the Atmel as I can write in 'c' which is just a lot easier than assembly. I have recently found an 8080 assembler I can use. This will come in handy as I'm building an 8080 emulator (using an Atmel MCU). I am recreating the first computer I built, 35 years ago. The MCU I'm using has 128 KBytes of flash and 32 KBytes of Ram, quite a bit more than the 1K EEPROM AND 4K of RAM. The RAM card was made from 32 1Kbit chips and I wired all of it by hand. Clark Martin KK6ISP Yet another designated driver on the information super highway. > On Aug 30, 2016, at 4:29 PM, Louis Ciotti <lciot...@gmail.com> wrote: > > So this is a general old school macintosh question. Did anyone actually use > a macintosh to program and develop circuits that involved microcontrollers > (like microchip pics, or 8051s, etc.) -- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to vintage-macs@googlegroups.com To leave this group, send email to vintage-macs+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.