Daniele orlandi wrote:
I'm following that thread... I have been having problems in some
installation. The system freezes (and comes back within 15 mins or so).
The problem was that I was using the IO-APIC. Some motherboards don't
have IO-APIC implemented as they should have. Thus I switched to
LOCAL-APIC and the problem gone away.
But please note, that the # of interrupts with LOCAL-APIC is limited
(not so much with the IO-APIC), perhaps one should fight with interrupt
sharing when using LOCAL-APIC.
Btw, HFC cards are *very* demanding irq wise. They are clocking
interrupts more heavily than the system timer.
How one can know, what kind of APIC has been used?
more /proc/interrupts
Take a peek at LOCAL-APIC or IO-APIC outputs.
Daniele, how is the echo cancellation progressing?
=b
On Wednesday 15 February 2006 12:02, you wrote:
Correct. That's the way it should be. But The card seems to get a TEI
assigned ONLY when the PBX is connected as well to the telco NT S0. Card
alone? System hang.
Ok, connect the serial port and get that OOPS, there is nothing else left to
try.
Bye,
_______________________________________________
Visdn-hackers mailing list
[email protected]
https://mailman.uli.it/mailman/listinfo/visdn-hackers
_______________________________________________
Visdn-hackers mailing list
[email protected]
https://mailman.uli.it/mailman/listinfo/visdn-hackers
