Ok, I've got good/bad news...
In the end, I decided to install CentOS just to test the card, I'll be
back on RHEL5 in a week or two.
After some tweaking (such as creating manually /dev/vgsm and ln -s each
../vgsm_meX inside), the card now installs correctly, lsmod shows
correctly, * modules too, and even the command
[EMAIL PROTECTED] ~]# asterisk -rx "vgsm send sms vodafone 339xxxxxxx ciao"
works too.
I'd like to point out that your online documentation is misleading.
Telephone numbers are to be prefixed by a + or just remove 39. Either
way in ASCII it will work.
I actually can't make it work with UTF-8, though.
Action: VGSMsmstx
To: 339xxxxxxx
X-SMS-Module: vodafone
X-SMS-Class: 3
X-SMS-SMCC-Number: +393492000200
Content-type: text/plain; charset=UTF-8
Content-Transfer-Encoding: base64
Content:
UXVlc3RvIMOoIHVuIFNNUyBjb24gaW52aWF0byBpbiBVQ1MyLCDDoMOow6zDssO5IGZ1bnppb25hbm8sIG1hIGFuY2hlIM6xzrLOs860zrUgOikK
Status: 500
Response: Error
Message: unknown error
I tried even without the SMCC number (after all, in ASCII it worked
without), without much luck...
Action: VGSMsmstx
To: 339xxxxxxx
X-SMS-Module: vodafone
X-SMS-Class: 3
Content-type: text/plain; charset=UTF-8
Content-Transfer-Encoding: base64
Content:
UXVlc3RvIMOoIHVuIFNNUyBjb24gaW52aWF0byBpbiBVQ1MyLCDDoMOow6zDssO5IGZ1bnppb25hbm8sIG1hIGFuY2hlIM6xzrLOs860zrUgOikK
Status: 400
Response: Error
Message: Network out of order
Even the error code has changed....
And I have another matter... I can't use the card for voice calls. This
is my * CLI output:
Verbosity was 3 and is now 25
-- Accepting AUTHENTICATED call from 192.100.100.85:
> requested format = ulaw,
> requested prefs = (),
> actual format = ulaw,
> host prefs = (ulaw|alaw|gsm),
> priority = mine
-- Executing [EMAIL PROTECTED]:1] Dial("IAX2/1914-8",
"VGSM/tim/+39339xxxxxxx") in new stack
-- Called tim
-- VGSM/tim/1 is proceeding passing it to IAX2/1914-8
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [EMAIL PROTECTED]:2] Hangup("IAX2/1914-8", "") in
new stack
== Spawn extension (from-iax, 3398695689, 2) exited non-zero on
'IAX2/1914-8'
-- Hungup 'IAX2/1914-8'
Note that right now IAX peers such as 1914 in my case work flawlessly
bidirectionally. I even set debug on on iax2 protocol, and it showed
nothing wrong on iax2 side, AFAIK.
here's the output from the telnet session while dialling from my iax
peer toward outside passing from the VGSM card:
Event: Newchannel
Privilege: call,all
Timestamp: 1179226186.636441
Channel: IAX2/1914-3
State: Ring
CallerIDNum: <unknown>
CallerIDName: Marcello
Uniqueid: 1179226186.2
Event: Newexten
Privilege: call,all
Timestamp: 1179226186.636751
Channel: IAX2/1914-3
Context: from-iax
Extension: 339xxxxxxx
Priority: 1
Application: Dial
AppData: VGSM/tim/+39339xxxxxxx
Uniqueid: 1179226186.2
Event: Newchannel
Privilege: call,all
Timestamp: 1179226186.636798
Channel: VGSM/tim/1
State: Down
CallerIDNum: <unknown>
CallerIDName: <unknown>
Uniqueid: 1179226186.3
Event: Rename
Privilege: call,all
Timestamp: 1179226186.636837
Oldname: VGSM/tim/1
Newname: VGSM/tim/1
Uniqueid: 1179226186.3
Event: Newstate
Privilege: call,all
Timestamp: 1179226186.636880
Channel: VGSM/tim/1
State: Dialing
CallerID: <unknown>
CallerIDName: Marcello
Uniqueid: 1179226186.3
Event: Dial
Privilege: call,all
Timestamp: 1179226186.636961
Source: IAX2/1914-3
Destination: VGSM/tim/1
CallerID: <unknown>
CallerIDName: Marcello
SrcUniqueID: 1179226186.2
DestUniqueID: 1179226186.3
Event: Newcallerid
Privilege: call,all
Timestamp: 1179226186.637058
Channel: VGSM/tim/1
CallerID: 339xxxxxxx
CallerIDName: <Unknown>
Uniqueid: 1179226186.3
CID-CallingPres: 1 (Presentation Allowed, Passed Screen)
Event: Newstate
Privilege: call,all
Timestamp: 1179226188.848117
Channel: VGSM/tim/1
State: Down
CallerID: 339xxxxxxx
CallerIDName: <unknown>
Uniqueid: 1179226186.3
Event: Hangup
Privilege: call,all
Timestamp: 1179226188.848411
Channel: VGSM/tim/1
Uniqueid: 1179226186.3
Cause: 50
Cause-txt: Facility not subscribed
Event: Newexten
Privilege: call,all
Timestamp: 1179226188.848495
Channel: IAX2/1914-3
Context: from-iax
Extension: 339xxxxxxx
Priority: 2
Application: Hangup
AppData:
Uniqueid: 1179226186.2
Event: Hangup
Privilege: call,all
Timestamp: 1179226188.848623
Channel: IAX2/1914-3
Uniqueid: 1179226186.2
Cause: 50
Cause-txt: Facility not subscribed
Help!
I'm running CentOS 4.4, * 1.4.4, vstuff-0.20.8
Kindest regards,
--
Marcello Golfieri
_______________________________________________
Visdn-hackers mailing list
[email protected]
https://mailman.uli.it/mailman/listinfo/visdn-hackers
