Same problem here. The installer cannot start the service. I've tried 2.0.1 / 2.0.2 and 2.0.3.20456
I saw this error in the event logs: VisualSVNServer.exe: Syntax error on line 111 of C:/Services/VisualSVN Server/conf/httpd.conf: Syntax error on line 1 of C:/Services/ VisualSVN Server/conf/httpd-custom.conf: Cannot load C:/Services/ VisualSVN Server/trac/python/mod_python_so.pyd into server: Access is denied. On Jul 28, 10:31 am, Gerry <[email protected]> wrote: > No go. It has probably hosed my environment again. Fails to start > service at end of install--can retry or cancel. Cancel rolls back but > probably to non-working state. > > have this in event log: > The description for Event ID 1000 from source VisualSVN Server cannot > be found. Either the component that raises this event is not installed > on your local computer or the installation is corrupted. You can > install or repair the component on the local computer. > If the event originated on another computer, the display information > had to be saved with the event. > The following information was included with the event: > Parent: Child process exited successfully. > Also, messages from restart manager (10000 and 10005). > > Gerry > > On Jul 28, 9:23 am, VisualSVN Team <[email protected]> wrote: > > > Right now we are working on the patch for the "Cannot get effective > > rights from ACL" problem. Could you please try to setup the special > > development build and tell us whether the problem is solved or not? > > > You can download the special built > > at:http://www.visualsvn.com/files/beta/VisualSVN-Server-2.0.3.20456.msi > > > Thanks in advance! > > > -- > > With best regards, > > Danil Shopyrin > > VisualSVN Team > >
