I don't think ICS does port forwarding, at least not well. Option 1 is a good one even for dial up as some SOHO stuff e.g. dlink 704 can support external Serial modems (like us robotics, etc).
The only other option would be to VNC to the main machine and then vnc again to an inside client. Again with ICS this may even be difficult. --Angelo On Wed, 19 Jan 2005 12:07:27 -0700, Steven Clark <[EMAIL PROTECTED]> wrote: > You have a couple of options that both involve port forwarding. > > 1) Get a SOHO router to interface with your ISP (good option for DSL & > cable). Many DSL "modems" are also routers with this capability built in. > > 2) Configure port forwarding with Windows ICS (probably your only option if > you have a dialup connection). > > You then connect to your one external IP address and the router can forward > requests to your different computers on the LAN. You then choose which > computer to connect to by which port you choose from your VNC client. > > Hope this helps. > > Steven > > ----- Original Message ----- > From: "David Williams" <[EMAIL PROTECTED]> > To: "VNC" <[email protected]> > Sent: Wednesday, January 19, 2005 11:48 AM > Subject: Connect to a specific computer on a home network > > > how can i specify which computer i wish to connect to on the network as > they > > all share the same connection to the internet using Internet connection > > sharing on windows ME and 98? > > _______________________________________________ > > VNC-List mailing list > > [email protected] > > To remove yourself from the list visit: > > http://www.realvnc.com/mailman/listinfo/vnc-list > _______________________________________________ > VNC-List mailing list > [email protected] > To remove yourself from the list visit: > http://www.realvnc.com/mailman/listinfo/vnc-list _______________________________________________ VNC-List mailing list [email protected] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
