Look for the website from G3YNH, some very excellent stuff about bridges and AC 
theory regarding impedance and admittance.
www,g3ynh.info/zdocs/AC_theory/index.html
I have bought the GR1620 and I love it. Found info about the hatfield LE300, 
that looks just what I was looking for as a generl RF admitance bridge. But i 
do not search for equivalents yet. To late now, i go to bed.

Fred PA4TIM

Op 26 mei 2012 om 22:16 heeft Brooke Clarke <[email protected]> het volgende 
geschreven:

> Hi Fred:
> 
> Here's my page on transmission line Zo and how it's not a constant impedance:
> http://www.prc68.com/I/Zo.shtml
> I've added a list of impedance equipment on the Impedance web page:
> http://www.prc68.com/I/Z.shtml#Rel
> 
> I've used a number of the Keithley DC boxes for automated testing of 
> semiconductors.
> http://www.prc68.com/I/RASS_PP.html#D
> http://www.prc68.com/I/RASS_PP.html#TD
> They are great where you need a current source in the nano or femto amp range 
> or higher.
> 
> Have Fun,
> 
> Brooke Clarke
> http://www.PRC68.com
> http://www.end2partygovernment.com/Clarke4Congress.html
> 
> 
> Fred Schneider wrote:
>> Thanks for the info, the HP impedance measurement handbook is a bit my bible 
>> so I know it.
>> 
>> About analysers, i know a modern impedance analyser, be it a vna, IV, or 
>> just a LCR meter can be more accurate and has more possibilities.
>> I have two digital vna's  ( DG8SAQ VNWA) one that has the RF-IV test head 
>> designed by Paul and an analog one from HP. The latter I yesterday used to 
>> make RF-IV measurements as an experiment. A tek CT currentprobe from 
>> splitter to reference and the other output via a shunt fixture to the test 
>> port. The result was above wat I expected,  a nice impedance curve that has 
>> a resolution of 40 dB under 1 ohm.
>> I am most time busy doing network analysing, component research, most of 
>> them involve capacitors and parasitic behaviour of components. And playing 
>> with calibrators.
>> 
>> But I teached my self everything and i have no math education so I always 
>> avoided that ( i have discalculus too) but I like it a lot and the lat time 
>> I try to get back to the basics for deeper understanding about what I am 
>> meaduring and for most practice and learn some math. The result is new ( 
>> that is for me) ways to measure things. I ( re ?)invented a CF converter, 
>> build snd designed a IV-meter like fF meter, did coulomb and C ( under 10pF) 
>> measurements with a O plugin in an old Tek 547 ( after that i found out it 
>> was, in a different form, described in the manual). Did tek-130 style C 
>> measements like described by Terman. Measured capacitanceusing DC, tryed 
>> about 10 ways to measure ESR, recently tried to measure the parasitics of 10 
>> m bare wire. Things like inductance, resistance, skineffect, Q, capacitance 
>> ect. Very intresting, the meaurements worked, grapical it made sense and 
>> gave an idea, but the math was to complex for me to extract it to numbers, 
>> gave the data ( thoug!
>>  hstone files) and graphs to a friend who is a math , RF engineer and RF 
>> guru but he had to admit it was even to complex for him. He could probably 
>> do it but it would take to much time. I could not anlyse the data my self.  
>> This is pure hobby, I do not even have an electronic education.
>> 
>> I have a marconi TF1313A, 0,1% bridge and a HP ( the same, like the damaged 
>> one you have)
>> I builded a simpke complex measurement bridge based on the arrl antenna 
>> handbook. Also made a poor mans wobbulator based on a noise source, external 
>> signal generator and audio SA software ( involved mixing so it could be used 
>> for the whole HF band)
>> 
>> But it would be great to have an old bridge like the GR ones. With lots of 
>> knobs and after that calculate from there, to the corrections ect. Mostly to 
>> measure capacitove stuff.
>> 
>> I'm offered a GR1620 from a list member that I will buy, i read the manual 
>> and I allready love it.
>> With the info gathered I also would like to have a passive RF type bridge. I 
>> know I can easy use a vna but I like to measure the basics and try to 
>> extract the other parametrs from there as a learning experience. I am now 
>> doing some 3 voltmeter experiments. It is nice to compare results from this 
>> experiments to my vna. Some times I'm way of but it feels good if it worked 
>> out well. Like meauring capacitance and esr on a curvtracer, that was fun. 
>> Or the RI-IV meaurement of a cap. After that I had calculated esr 
>> capacitance and esl from that I did a simulation and that gave the same SRF. 
>> That gives me a kick.
>> 
>> So to be short ( very difficult for me ;-) ) , i do not have a need for a 
>> frequency or so, i adjust/ make up my experiments around an instrument.
>> 
>> Thanks to the answers from you and the others and your link i now know were 
>> to look for and use the right search terms. First wait for answer from the 
>> seller of the GR about transport and hopr we find a way abd then play with 
>> that nice instrument and then look for a RF admitance/impedance bridge.
>> 
>> Short question, keithley makes source meters, They are in the 
>> micromeasurements handbook but I can not really place this. It sounds like a 
>> sort of IV meter, or coulomb meter but for DC. Not planning to buy one, just 
>> curious.
>> 
>> Thanks,
>> 
>> Fred PA4TIM
>> 
>> Op 25 mei 2012 om 22:41 heeft Brooke Clarke<[email protected]>  het 
>> volgende geschreven:
>> 
>>> Hi Fred:
>>> 
>>> In HP speak "meters" have numerical readouts and "analyzers" have graphical 
>>> readouts.
>>> So the 4-terminal pair LCR meters are good, but the 4-terminal pair LCR 
>>> analyzers are better.
>>> You can substitute "Impedance" for LCR in the above.
>>> I say better because the you can get an equivalent circuit from an analyzer 
>>> that has more than two components, which is the limit of the meters.
>>> Some analyzers can fit complex models automatically, for example Impedance 
>>> Analyzers and Crystal Impedance meters (which use swept frequency but only 
>>> have numerical readouts).
>>> 
>>> The bible for impedance measurement is HP's "The Impedance Measurement 
>>> Handbook", see my Related paragraph on the Impedance web page:
>>> http://www.prc68.com/I/Z.shtml#Rel
>>> This is a MUST READ if you're into precision LCR type measurements.
>>> There's also the issue of compensation and correction of fixture 
>>> parasitics.  For more on fixtures see the HP Accessories Selection Guide 
>>> for Impedance Measurements.
>>> 
>>> The key idea is that there's a contour plot of accuracy vs impedance and 
>>> frequency for the different measurement methods, with the 4-terminal pair 
>>> method giving the most accurate results.  
>>> http://www.prc68.com/I/HP4274_4275_LCR.shtml#4TP
>>> A lot of that is because of canceling magnetic coupling between the 4 coax 
>>> cables (note that not all the coax shields are are at ground).
>>> The earlier instruments that used 4 each 5-way binding posts are not 
>>> anywhere as accurate.
>>> 
>>> Have Fun,
>>> 
>>> Brooke Clarke
>>> http://www.PRC68.com
>>> http://www.end2partygovernment.com/Clarke4Congress.html
>>> 
>>> 
>>> Fred Schneider wrote:
>>>> Hi,
>>>> I do not know if it is a topic for here, but it is about precision 
>>>> messurements.
>>>> For my collection and learing through measuring the old , "back to the 
>>>> basics" way,  I am looking for a bridge to measure things like small caps, 
>>>> dielectric constants ad other "weard" parameters. I have several VNA's and 
>>>> RLC bridges but they used to make bridges that you can see as a manual 
>>>> VNA. It gave R and jX, sometimes with build in detector and oscillator, 
>>>> sometimes using these external.
>>>> But there are so many bridges, from general purpose to special measuring 
>>>> things ( like the resistance from a detonator) and from general purpose to 
>>>> high precision that I am lost. I think GR or Wayne Kerr made the best 
>>>> ones. I'm to young to have experience with them and never seen one for 
>>>> real.
>>>> 
>>>> Can someone give me a hint what to search for. For instance the right name 
>>>> of such a bridge ( i think Z/Y or admittance cq impedance bridge) and what 
>>>> is important so I can determ if they are for what I want and not just a 
>>>> allround LCR bridge.
>>>> 
>>>> I want to measure the more extreme things like ESR, fF, delectric 
>>>> proporties/losses ect but for most I love old precision measurement 
>>>> instruments which make you think about what you do and have lots of knobs 
>>>> instead of menus.
>>>> 
>>>> Fred PA4TIM
>>>> _______________________________________________
>>>> volt-nuts mailing list -- [email protected]
>>>> To unsubscribe, go to 
>>>> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
>>>> and follow the instructions there.
>>>> 
>>>> 
>>> _______________________________________________
>>> volt-nuts mailing list -- [email protected]
>>> To unsubscribe, go to 
>>> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
>>> and follow the instructions there.
>> _______________________________________________
>> volt-nuts mailing list -- [email protected]
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
>> and follow the instructions there.
>> 
>> 
> 
> 
> _______________________________________________
> volt-nuts mailing list -- [email protected]
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.

_______________________________________________
volt-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.

Reply via email to