Hello Dave,
in the schematic, the polarity of the diodes in series with the neon
bulbs is definitely wrong.
If you compare with the 3420A on page 7-7 (29), but also with the Fluke
845 which is similar, both neons have to be switched at 180°.
Maybe someone else has erroneously reversed one of the diodes in your
unit before?
If both neons are really firing in phase, instead, that could explain
this non-symmetric waveform, which you observe.
Frank
_______________________________________________
volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.