* This is the VOP Radius mailing list * Here is what I have: #GlobalPOPs Slipstream ATTRIBUTE Slipstream-Auth 1 string VENDOR_CODE SLIPSTREAM 7000 VSA SLIPSTREAM Slipstream-Auth 1 string
But I still cannot get the slipstream to work....all spaces are TAB chars. Lanham > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Yves > Sent: Friday, January 16, 2004 9:04 AM > To: [EMAIL PROTECTED] > Subject: [VOPRadius] How-to get vopradius working with slipstream > > > * This is the VOP Radius mailing list * > FYI... > > If you need to get VOPRadius running with a SLIPSTREAM box (bandwidth > optimizer) > > (Note that the <tab> is a real tab character. Hit your tab key) > > 1) Go to program files\vircom\radius and open up the vprdict.txt file with > notepad [vopradius dictionary] > > 2) Where the Vendor Codes are, add: > > VENDOR_CODE<tab>SLIPSTREAM<tab>7000 > > 3) Where the VSA codes are, add: > > VSA<tab>SLIPSTREAM<tab>Slipstream-Auth<tab>1<tab>String > > 4) Save and close > > 5) You will then need to create a profile that will be used by people who > will have access to slipstream, > go to program files\vircom\radius and open up the profiles.txt file with > notepad > > Profile="Slipstream" > <tab>Service-Type = Framed-User > <tab>Framed-Protocol = PPP > <tab>-- all your other attributes -- > <tab>Slipstream-Auth = true > > Note that the true MUST be in lower case, the slipstream > bandwidth optimizer > is case-sensitive. > > 6) You might also need to set "Default to PPP" on in Radius Console -> > Radius Server tab. > > -- > Yves Lacombe > Vircom Technical Support > > > ** > To leave this list, send an email to [EMAIL PROTECTED] > and put the word "LEAVE" in the BODY of the email. ** To leave this list, send an email to [EMAIL PROTECTED] and put the word "LEAVE" in the BODY of the email.
