|
Profile=""
Slipstream-Auth =
true
Framed-Protocol = PPP
What does your profile look like?
Do you have the other options enable as per Yves
directions?
Paul
Lanham Rattan wrote:
* This is the VOP Radius mailing list *
Here is what I have:
#GlobalPOPs Slipstream
ATTRIBUTE Slipstream-Auth 1 string
VENDOR_CODE SLIPSTREAM 7000
VSA SLIPSTREAM Slipstream-Auth 1 string
But I still cannot get the slipstream to work....all spaces are TAB chars.
Lanham
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Yves
Sent: Friday, January 16, 2004 9:04 AM
To: [EMAIL PROTECTED]
Subject: [VOPRadius] How-to get vopradius working with slipstream
* This is the VOP Radius mailing list *
FYI...
If you need to get VOPRadius running with a SLIPSTREAM box (bandwidth
optimizer)
(Note that the <tab> is a real tab character. Hit your tab key)
1) Go to program files\vircom\radius and open up the vprdict.txt file with
notepad [vopradius dictionary]
2) Where the Vendor Codes are, add:
VENDOR_CODE<tab>SLIPSTREAM<tab>7000
3) Where the VSA codes are, add:
VSA<tab>SLIPSTREAM<tab>Slipstream-Auth<tab>1<tab>String
4) Save and close
5) You will then need to create a profile that will be used by people who
will have access to slipstream,
go to program files\vircom\radius and open up the profiles.txt file with
notepad
Profile=""
<tab>Service-Type = Framed-User
<tab>Framed-Protocol = PPP
<tab>-- all your other attributes --
<tab>Slipstream-Auth = true
Note that the true MUST be in lower case, the slipstream
bandwidth optimizer
is case-sensitive.
6) You might also need to set "Default to PPP" on in Radius Console ->
Radius Server tab.
--
Yves Lacombe
Vircom Technical Support
**
To leave this list, send an email to [EMAIL PROTECTED]
and put the word "LEAVE" in the BODY of the email.
**
To leave this list, send an email to [EMAIL PROTECTED]
and put the word "LEAVE" in the BODY of the email.
|
