Jed,
It is not clear to me what you are complaining about. This is an
interview where Rossi gives rounded numbers off the top of his head. If
the output temperature was 116C this is a good indication that the
steam was superheated and not wet.
On 6/5/2016 11:27 AM, Jed Rothwell wrote:
Jack Cole <[email protected] <mailto:[email protected]>> wrote:
Of course there is evidence of laziness or an utterly poor
understanding of measurement instruments with the presentation of
the apparently fake measurements (3 or 4 trailing zeros according
to Jed).
That's not according to me. That was Rossi himself, in the Lewan
interview:
https://animpossibleinvention.com/2016/05/16/rossi-makes-offer-on-swedish-factory-building-plus-more-updates/
Quotes:
"The average flow of water was 36 cubic meters per day.
A total of about 31 MJ of electric energy was input. At 0,9 g/s, a
total of about 26 kg of water was input during the test from 11 am
until 7 pm. Heating this water from 25 to 116 degrees centigrade
requires about 10 MJ. During the last 5 hours, 16 kg of this water was
also evaporated, which required about 36 MJ."
See also:
http://www.mail-archive.com/vortex-l%40eskimo.com/msg109919.html
Those numbers plus some other surprisingly round numbers were in the
data I saw.
- Jed
