Ed, You are making the experiment to hard. All that is need is a @ 5 inch palladium wire. The wire would be run through a divider. On one side of the wall would be low pressure hydrogen. On the other side would be water though which you could see the hydrogen bubbling. Connect a signal generator at each end of the wire. Turn it on vary the frequency and watch the bubbles. Easy enough. I would like to see this done. Frank In a message dated 6/19/2009 4:17:36 P.M. Eastern Daylight Time, stor...@ix.netcom.com writes:
This might be something KivaLabs could try, Frank. We are using radio frequency for other purposes, which would make this use relatively simple. However, since PdD is a conductor, the RF would induce a current of that frequency in the metal surface. The interior where diffusion occurs would see no effect. This might be a problem. I expect a lower frequency would probably be necessary to influence the interior of the diffusion barrier. Ed **************Dell Inspiron 15: Now starting at $349 (http://pr.atwola.com/promoclk/100126575x1222435718x1201460505/aol?redir=http:%2F%2Fad.doubleclick. net%2Fclk%3B215748553%3B38126199%3Bs)
