My HV based systems are normally pulsed in the range of 0.1 to 400 Hz. But even the old electrolysis system would give MHz signals. (bubbles????) D2
To: vortex-l@eskimo.com Subject: Re: [Vo]:Defkalion/MFMP implications for electrolysis? From: dlrober...@aol.com Date: Fri, 26 Jul 2013 15:59:20 -0400 Dennis, do your experiments generally have pulses of currents hitting the active material? It might be that the metal wires are given impulse like kicks that cause them to ring at their resonant frequencies. Dave -----Original Message----- From: DJ Cravens <djcrav...@hotmail.com> To: vortex-l <vortex-l@eskimo.com> Sent: Fri, Jul 26, 2013 1:09 pm Subject: RE: [Vo]:Defkalion/MFMP implications for electrolysis? I did not notice external coils. My "cells" often "sing" at a few hundred hertz (around 400) and at tens of MHz. I was never sure if it was the reaction itself or just ringing of the components. Letts's empirical model has the reaction rates proceeding via the Lamor frequency rates at the vacancies. That frequency depends on the B field of the reactive volumes. It has the reaction rate at roughly linear with B. I personally have Sm2Co17 powder in my system to increase the B field in the reactive volume. Some here may remember the ICCF 4 (Maui) demo in the parking lot where they were using Sm Co materials. Date: Fri, 26 Jul 2013 13:54:29 -0300 Subject: Re: [Vo]:Defkalion/MFMP implications for electrolysis? From: danieldi...@gmail.com To: vortex-l@eskimo.com Because of the above limitations of passive shielding, an alternative used with static or low-frequency fields is active shielding; using a field created by electromagnets to cancel out the ambient field within a volume.[7] Solenoids and Helmholtz coils are types of coils that can be used for this purpose. We saw a solenoid around the reactor, didn't we? https://en.wikipedia.org/wiki/Electromagnetic_shielding 2013/7/26 DJ Cravens <djcrav...@hotmail.com> the magnetic field from a dipole falls of as the inverse cube of the distance. .... it falls off quickly. I am not sure what it would be outside a mu metal shielded device, but I would expect not much would be available for "tools across the room". Date: Fri, 26 Jul 2013 13:45:17 -0300 Subject: Re: [Vo]:Defkalion/MFMP implications for electrolysis? From: danieldi...@gmail.com To: vortex-l@eskimo.com Also, this: https://en.wikipedia.org/wiki/Neodymium_magnet_toys 2013/7/26 Daniel Rocha <danieldi...@gmail.com> It is a strong field. But it falls fast, specially if the magnetized object is tiny: https://en.wikipedia.org/wiki/Neodymium_magnet 2013/7/26 Jones Beene <jone...@pacbell.net> That kind of field at 20 cm from the device (their claim) would be pulling tools from across the room. Jones -- Daniel Rocha - RJ danieldi...@gmail.com -- Daniel Rocha - RJ danieldi...@gmail.com -- Daniel Rocha - RJ danieldi...@gmail.com
