Jojo, I'll see if I can accomplish that. In the meantime, here are the results of testing.
http://www.lenr-coldfusion.com/2014/08/26/sun-cell-lite-testing/ We do get sparks without dipping in water. The last two are after dipping in water. What do you think--more intense? Jack On Tue, Aug 26, 2014 at 6:09 AM, Jojo Iznart <jojoiznar...@gmail.com> wrote: > consider grinding a titanium bar into powder and then forming a small > pellet with water. This should be the quintessential Mill's fuel pellet. > See if the spark is as intense as Mill's suncell. > > > Jojo > > > > ----- Original Message ----- > *From:* Jack Cole <jcol...@gmail.com> > *To:* vortex-l@eskimo.com > *Sent:* Tuesday, August 26, 2014 7:06 PM > *Subject:* Re: [Vo]:SunCell - Initial Replication Attempt > > Yes, I was planning to do that. I'll make a video of each test case. > I'll try with just the electrodes, with the copper wire only, and then dip > it in water. > > I'm also planning to try with titanium. It will take a little work to get > a small enough piece of that cut. > > I'm also going to try a small piece of metal with a little impression > drilled into it so I can place water into the impression. Then I'll set > the electrode into the impression where the water is. > > > On Tue, Aug 26, 2014 at 5:51 AM, Jojo Iznart <jojoiznar...@gmail.com> > wrote: > >> could you try copper wire without dipping in water and also with >> nothing at all. - no copper wire, just the electrodes. These would be your >> controls. to compare it with samples with water. >> >> >> Jojo >> >> >> >> ----- Original Message ----- >> *From:* Jack Cole <jcol...@gmail.com> >> *To:* vortex-l@eskimo.com >> *Sent:* Tuesday, August 26, 2014 6:39 PM >> *Subject:* Re: [Vo]:SunCell - Initial Replication Attempt >> >> It was with a tiny piece of copper wire that I dipped in water and put >> between the electrodes. The amount of water is minuscule (the amount that >> managed to adhere to the metal). You don't get that without the water. >> >> >> On Tue, Aug 26, 2014 at 5:13 AM, Jojo Iznart <jojoiznar...@gmail.com> >> wrote: >> >>> was that the spark with or without fuel (water pellets)? >>> >>> >>> Jojo >>> >>> >>> >>> ----- Original Message ----- >>> *From:* Jack Cole <jcol...@gmail.com> >>> *To:* vortex-l@eskimo.com >>> *Sent:* Tuesday, August 26, 2014 9:15 AM >>> *Subject:* [Vo]:SunCell - Initial Replication Attempt >>> >>> Hi Folks, >>> >>> I was excited to receive my spot welder today. After ensuring it was in >>> working order, I decided to get right to it and see if I could get anything >>> like what BLP showed. Lo and behold I got something on the first try. >>> >>> I remembered Mills talking about all the different possibilities for >>> types of conductors that they might use in the commercial device, and >>> copper was one of them. I cut a very small piece of copper wire, dipped it >>> in water, placed it on the electrodes, hit the switch, and pop with some >>> bright light! >>> >>> Here's a link to the vid. Sorry for the bad camera work. >>> >>> Let me know what you think. I'll do another vid soon in complete >>> darkness. >>> >>> http://youtu.be/d6XYqEhwZgA >>> >>> Jack >>> >>> >> >