Toth, How old is your madwifi, or which kernel or voyage version you used? Please be more specific.
Toth Szabolcs wrote:
Hi ! I have an Ubiquiti Networks SuperRange2 802.11b/g 400mW High Power Atheros Wireless mini-pci card. I was able to set the Tx Power to 400wW width the old madwifi but with the new madwifi-tools I was unable to set the tx power above 15-20dbm. I tired the following but nothing changed: You can see that the Tx-Power hasn't gone above 15dBm however my card can give 27dBm. wrap2c:~# iwconfig ath0 txpower auto wrap2c:~# iwconfig ath0 ath0 IEEE 802.11b ESSID:"ajka-air" Mode:Master Frequency:2.412 GHz Access Point: 00:15:6D:10:00:43 Bit Rate:0 kb/s Tx-Power:12 dBm Sensitivity=0/3 Retry:off RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/94 Signal level=-95 dBm Noise level=-95 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 wrap2c:~# iwconfig ath0 txpower fixed wrap2c:~# iwconfig ath0 ath0 IEEE 802.11b ESSID:"ajka-air" Mode:Master Frequency:2.412 GHz Access Point: 00:15:6D:10:00:43 Bit Rate:0 kb/s Tx-Power=12 dBm Sensitivity=0/3 Retry:off RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/94 Signal level=-95 dBm Noise level=-95 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 wrap2c:~# iwconfig ath0 txpower 400mWwrap2c:~# iwconfig ath0 ath0 IEEE 802.11b ESSID:"ajka-air"Mode:Master Frequency:2.412 GHz Access Point: 00:15:6D:10:00:43 Bit Rate:0 kb/s Tx-Power=15 dBm Sensitivity=0/3 Retry:off RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/94 Signal level=-95 dBm Noise level=-95 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I use the following modules: ------------------------------------------------------------------ ath_hal: module license 'Proprietary' taints kernel. ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413) wlan: 0.8.6.0 (EXPERIMENTAL) ath_rate_onoe: 1.0 ath_pci: 0.9.6.0 (EXPERIMENTAL) Build date: Aug 23 2005 Debugging version (IEEE80211 ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: H/W encryption support: WEP AES AES_CCM TKIP ath0: mac 5.9 phy 4.3 radio 4.6 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons Debugging version (ATH) ath0: Atheros 5212: mem=0x80040000, irq=9 ath_pci: loaded successfully ================================================================================ Please help ?? Szabolcs Toth _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
-- Regards, Punky P U N K N ! X . c o m Technology + Lifestyle (http://www.punknix.com) Voyage Linux (http://www.voyage.hk/software/voyage.html) _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
