Hi Punky, I tried but the result is the same by me too.
regards, Szabolcs On Thu, 22 Sep 2005, Giorgio Ducci wrote: > Hi Punky, > > thanks for your prompt answer but unfortunately does not work. The result > is the same. > No luck > cheers > Giorgio > >May be this thread show you some hints? > > > >http://sourceforge.net/mailarchive/message.php?msg_id=12954540 > > > >Looks like you need to bring down the interface first? > > > >Giorgio Ducci wrote: > > > >>Hi Toth, > >> > >>yes, I have kernel 2.6.8-486-voyage and madwifi-tools-20050726 and I have > >>the same problem with the same card..WIth the previous madwifi-tools as > >>you mention was fine for me, too. Who knows? > >>Cheers > >> > >>>Dear Tse, > >>> > >>>The working version is the madwifi 20050105-1 which was included in the > >>>voyage0.1sarge version. > >>> > >>>The voyage-0.2pre1 use the kernel-image-2.6.8-486-voyage_2.0-2 and > >>>madwifi_20050712. This combination is useless for my card. > >>> > >>>I used the downloadable version from both dists and I changed nothing on > >>>them. > >>> > >>>Toth > >>> > >>>On Wed, 21 Sep 2005, Punky Tse wrote: > >>> > >>> > Toth, > >>> > > >>> > How old is your madwifi, or which kernel or voyage version you > >>> used? Please be more specific. > >>> > > >>> > Toth Szabolcs wrote: > >>> > > Hi ! > >>> > > > >>> > > I have an Ubiquiti Networks SuperRange2 802.11b/g 400mW High Power > >>> Atheros > >>> > > Wireless mini-pci card. I was able to set the Tx Power to 400wW > >>> width the > >>> > > old madwifi but with the new madwifi-tools I was unable to set the > >>> tx power above 15-20dbm. > >>> > > I tired the following but nothing changed: > >>> > > You can see that the Tx-Power hasn't gone above 15dBm however my > >>> card can give 27dBm. > >>> > > > >>> > > wrap2c:~# iwconfig ath0 txpower auto > >>> > > wrap2c:~# iwconfig ath0 > >>> > > ath0 IEEE 802.11b ESSID:"ajka-air" > >>> > > Mode:Master Frequency:2.412 GHz Access Point: > >>> 00:15:6D:10:00:43 > >>> > > Bit Rate:0 kb/s Tx-Power:12 dBm Sensitivity=0/3 > >>> > > Retry:off RTS thr:off Fragment thr:off > >>> > > Encryption key:off > >>> > > Power Management:off > >>> > > Link Quality=0/94 Signal level=-95 dBm Noise level=-95 dBm > >>> > > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > >>> > > Tx excessive retries:0 Invalid misc:0 Missed beacon:0 > >>> > > > >>> > > wrap2c:~# iwconfig ath0 txpower fixed > >>> > > wrap2c:~# iwconfig ath0 > >>> > > ath0 IEEE 802.11b ESSID:"ajka-air" > >>> > > Mode:Master Frequency:2.412 GHz Access Point: > >>> 00:15:6D:10:00:43 > >>> > > Bit Rate:0 kb/s Tx-Power=12 dBm Sensitivity=0/3 > >>> > > Retry:off RTS thr:off Fragment thr:off > >>> > > Encryption key:off > >>> > > Power Management:off > >>> > > Link Quality=0/94 Signal level=-95 dBm Noise level=-95 dBm > >>> > > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > >>> > > Tx excessive retries:0 Invalid misc:0 Missed beacon:0 > >>> > > > >>> > > wrap2c:~# iwconfig ath0 txpower 400mW > >>> > > wrap2c:~# iwconfig ath0 > >>> > > ath0 IEEE 802.11b ESSID:"ajka-air" > >>> > > Mode:Master Frequency:2.412 GHz Access Point: > >>> 00:15:6D:10:00:43 > >>> > > Bit Rate:0 kb/s Tx-Power=15 dBm Sensitivity=0/3 > >>> > > Retry:off RTS thr:off Fragment thr:off > >>> > > Encryption key:off > >>> > > Power Management:off > >>> > > Link Quality=0/94 Signal level=-95 dBm Noise level=-95 dBm > >>> > > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > >>> > > Tx excessive retries:0 Invalid misc:0 Missed beacon:0 > >>> > > > >>> > > I use the following modules: > >>> > > ------------------------------------------------------------------ > >>> > > ath_hal: module license 'Proprietary' taints kernel. > >>> > > ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413) > >>> > > wlan: 0.8.6.0 (EXPERIMENTAL) > >>> > > ath_rate_onoe: 1.0 > >>> > > ath_pci: 0.9.6.0 (EXPERIMENTAL) > >>> > > Build date: Aug 23 2005 > >>> > > Debugging version (IEEE80211 > >>> > > ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > >>> > > ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps > >>> 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > >>> > > ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps > >>> 54Mbps > >>> > > ath0: H/W encryption support: WEP AES AES_CCM TKIP > >>> > > ath0: mac 5.9 phy 4.3 radio 4.6 > >>> > > ath0: Use hw queue 1 for WME_AC_BE traffic > >>> > > ath0: Use hw queue 0 for WME_AC_BK traffic > >>> > > ath0: Use hw queue 2 for WME_AC_VI traffic > >>> > > ath0: Use hw queue 3 for WME_AC_VO traffic > >>> > > ath0: Use hw queue 8 for CAB traffic > >>> > > ath0: Use hw queue 9 for beacons > >>> > > Debugging version (ATH) > >>> > > ath0: Atheros 5212: mem=0x80040000, irq=9 > >>> > > ath_pci: loaded successfully > >>> > > > >>> ================================================================================ > >>> > >>> > >>> > > > >>> > > Please help ?? > >>> > > Szabolcs Toth > >>> > > > >>> > > > >>> > > > >>> > > > >>> > > _______________________________________________ > >>> > > Voyage-linux mailing list > >>> > > [email protected] > >>> > > http://list.voyage.hk/mailman/listinfo/voyage-linux > >>> > > >>> > > >>> > -- > >>> > Regards, > >>> > Punky > >>> > P U N K N ! X . c o m > >>> > Technology + Lifestyle > >>> > (http://www.punknix.com) > >>> > > >>> > Voyage Linux > >>> > (http://www.voyage.hk/software/voyage.html) > >>> > > >>> > >>> > >>>_______________________________________________ > >>>Voyage-linux mailing list > >>>[email protected] > >>>http://list.voyage.hk/mailman/listinfo/voyage-linux > >> > >> > >> > >> > >>_______________________________________________ > >>Voyage-linux mailing list > >>[email protected] > >>http://list.voyage.hk/mailman/listinfo/voyage-linux > > > > > > > >-- > >Regards, > >Punky > >P U N K N ! X . c o m > >Technology + Lifestyle > >(http://www.punknix.com) > > > >Voyage Linux > >(http://www.voyage.hk/software/voyage.html) > > > > > > > > _______________________________________________ > Voyage-linux mailing list > [email protected] > http://list.voyage.hk/mailman/listinfo/voyage-linux > _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
