Note that the ALIX default baud rate is 38400, that is likely your problem.
Jon On Sun, Jul 8, 2012 at 6:33 AM, <[email protected]> wrote: > It is a no-name cable based on the CH340 chipset. I am also using a serial > female-to-female extension to connect it with the board. I 'll try your > cable. > > > Rainer Stratmann wrote: > > Am Sunday 08 July 2012 10:55:53 schrieb Konstantinos Birkos: >> Hello all, >> >> I have an ALIX 3D3 board with Voyage MPD 0.8.5 installed and serial >> terminal chosen during the installation process. I am trying to connect >> to the device via a USB-to-Serial cable > which one? > I do it very successfull with USB-serial devices with FTDI chipset. > http://www.reichelt.de/USB-Konverter/DIGITUS-DA-70156/3/index.html?;ACTION=3;LA=446;ARTICLE=99617 >> unsuccessfully. I have tried >> Putty through Windows and Putty, GTKTerm and minicom through Ubuntu >> 12.04. When I power up my device, I see no messages in the terminal. >> Sometimes under minicom, if I hit the keyboard of my host computer I >> receive some input/output errors. >> >> Any suggestions? > > > > _______________________________________________ > Voyage-linux mailing list > [email protected] > http://list.voyage.hk/mailman/listinfo/voyage-linux > > > _______________________________________________ > Voyage-linux mailing list > [email protected] > http://list.voyage.hk/mailman/listinfo/voyage-linux > _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
