BTW do you have a null modem adapter ? I had similar problems and got it working once I got the null modem adapter.
On Sun, Jul 8, 2012 at 9:32 AM, Jon Meek <[email protected]> wrote: > Note that the ALIX default baud rate is 38400, that is likely your problem. > > Jon > > On Sun, Jul 8, 2012 at 6:33 AM, <[email protected]> wrote: >> It is a no-name cable based on the CH340 chipset. I am also using a serial >> female-to-female extension to connect it with the board. I 'll try your >> cable. >> >> >> Rainer Stratmann wrote: >> >> Am Sunday 08 July 2012 10:55:53 schrieb Konstantinos Birkos: >>> Hello all, >>> >>> I have an ALIX 3D3 board with Voyage MPD 0.8.5 installed and serial >>> terminal chosen during the installation process. I am trying to connect >>> to the device via a USB-to-Serial cable >> which one? >> I do it very successfull with USB-serial devices with FTDI chipset. >> http://www.reichelt.de/USB-Konverter/DIGITUS-DA-70156/3/index.html?;ACTION=3;LA=446;ARTICLE=99617 >>> unsuccessfully. I have tried >>> Putty through Windows and Putty, GTKTerm and minicom through Ubuntu >>> 12.04. When I power up my device, I see no messages in the terminal. >>> Sometimes under minicom, if I hit the keyboard of my host computer I >>> receive some input/output errors. >>> >>> Any suggestions? >> >> >> >> _______________________________________________ >> Voyage-linux mailing list >> [email protected] >> http://list.voyage.hk/mailman/listinfo/voyage-linux >> >> >> _______________________________________________ >> Voyage-linux mailing list >> [email protected] >> http://list.voyage.hk/mailman/listinfo/voyage-linux >> > > _______________________________________________ > Voyage-linux mailing list > [email protected] > http://list.voyage.hk/mailman/listinfo/voyage-linux _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
