the other thing to note is that not all NIC drivers support setting interrupt and/or adaptive mode.
You should also ensure that you have I2e502306e27bd98f8037d1a0a396201e099b50b5 On Wed, Jul 20, 2022 at 2:06 PM Pim van Pelt <[email protected]> wrote: > > Hoi Xiaodong, > > One thing to note, is that the interface must be state 'up' before changes > are affected. If I set to 'adaptive' (best of both worlds, interrupts in low > load, polling in higher load': > > DBGvpp# set interface rx-mode GigabitEthernet3/0/0 adaptive > > > > DBGvpp# set interface state GigabitEthernet3/0/1 down > > DBGvpp# set interface rx-mode GigabitEthernet3/0/1 adaptive > > (no change) > > > DBGvpp# show logging > > 2022/07/20 20:03:34:656 error interface/rx-q setting rx mode on the > interface GigabitEthernet3/0/1 queue-id 0 failed. > > dpdk_interface_rx_mode_change: unsupported op (is the interface up?) > > > DBGvpp# set interface state GigabitEthernet3/0/1 up > > DBGvpp# set interface rx-mode GigabitEthernet3/0/1 adaptive > > DBGvpp# show hardware-interfaces GigabitEthernet3/0/1 > > Name Idx Link Hardware > > GigabitEthernet3/0/1 2 up GigabitEthernet3/0/1 > > Link speed: 1 Gbps > > RX Queues: > > queue thread mode > > 0 vpp_wk_0 (1) padaptive > > ... > > > > > One side note: > - before setting rx-mode, "show hardware-interfaces" without arguments will > list them all. > - after setting the rx-mode, "show hardware-interfaces" returns empty and > requires a specific interface to be named. > > However, CPU load goes down and polling clearly stops. Maybe that helps :) > > groet, > Pim > > On Wed, Jul 20, 2022 at 9:44 PM Xiaodong Xu <[email protected]> wrote: >> >> Hi, >> >> When I start vpp, the CPU usage will be close to 100% on the core that vpp >> is running on. I know this is normal because dpdk is running in poll mode. >> However when I set the rx-mode to 'interrupt', it doesn't make any >> difference. The command line I use looks like: >> >> # set interface rx-mode [ifname] interrupt >> >> Did I miss anything? Thanks for your attention and any suggestions are >> welcome. >> >> Regards, >> Xiaodong >> >> >> >> > > > -- > Pim van Pelt <[email protected]> > PBVP1-RIPE - http://www.ipng.nl/ > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#21695): https://lists.fd.io/g/vpp-dev/message/21695 Mute This Topic: https://lists.fd.io/mt/92512559/21656 Group Owner: [email protected] Unsubscribe: https://lists.fd.io/g/vpp-dev/leave/1480452/21656/631435203/xyzzy [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
