> As I thought, something is not right. The script gives me nothing back. If > I issue "tc -s -d class show dev eth0" on the command line, I also get > nothing back. > > So can I assume that something is wrong with vuurmuur? > > Where can I look to see whats going on?
A few pointers: - look at the output of 'vuurmuur -b' - check the vuurmuur.log for warnings - Have a look at this howto: http://www.vuurmuur.org/trac/wiki/TrafficShaping - Make sure you enabled the traffic shaping for the interfaces you want to shape on. In the interface config screen press F6 to get to the shaping settings. - make sure the 'tc' command location is set in Vuurmuur. Last but not least, add some shaping rules. Hope this helps, Victor ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Vuurmuur-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/vuurmuur-users
