----- Original Message ----
From: Victor Julien <[EMAIL PROTECTED]>
To: [email protected]
Sent: Tuesday, October 7, 2008 12:35:54 PM
Subject: Re: [Vuurmuur-users] stats on the traffic shaper
> As I thought, something is not right. The script gives me nothing back. If
> I issue "tc -s -d class show dev eth0" on the command line, I also get
> nothing back.
>
> So can I assume that something is wrong with vuurmuur?
>
> Where can I look to see whats going on?
A few pointers:
- look at the output of 'vuurmuur -b'
- check the vuurmuur.log for warnings
- Have a look at this howto:
http://www.vuurmuur.org/trac/wiki/TrafficShaping
- Make sure you enabled the traffic shaping for the interfaces you want
to shape on. In the interface config screen press F6 to get to the
shaping settings.
- make sure the 'tc' command location is set in Vuurmuur.
Last but not least, add some shaping rules.
Hope this helps,
Victor
I missed the interface config.
Thanks, Mike
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Vuurmuur-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/vuurmuur-users
