Michael Drons wrote: > > > > ----- Original Message ---- > From: Victor Julien <[EMAIL PROTECTED]> > To: [email protected] > Sent: Tuesday, October 7, 2008 12:35:54 PM > Subject: Re: [Vuurmuur-users] stats on the traffic shaper > > >> As I thought, something is not right. The script gives me nothing back. If >> I issue "tc -s -d class show dev eth0" on the command line, I also get >> nothing back. >> >> So can I assume that something is wrong with vuurmuur? >> >> Where can I look to see whats going on? > > A few pointers: > > - look at the output of 'vuurmuur -b' > - check the vuurmuur.log for warnings > - Have a look at this howto: > http://www.vuurmuur.org/trac/wiki/TrafficShaping > - Make sure you enabled the traffic shaping for the interfaces you want > to shape on. In the interface config screen press F6 to get to the > shaping settings. > - make sure the 'tc' command location is set in Vuurmuur. > > Last but not least, add some shaping rules. > > Hope this helps, > Victor > > > I missed the interface config. > > Thanks, Mike
I've added a warning to Vuurmuur_conf for this situation that will be in the next release (http://www.vuurmuur.org/trac/ticket/58). Thanks for your report Mike! Cheers, Victor ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Vuurmuur-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/vuurmuur-users
