Hello, Did you check the routing? i mean the DHCP server must be able to reach the client at the IP layer.
I remember i forgot this when i wrote the DHCP openmaniak tutorial. (See the case study, i forgot "set protocols static route 0.0.0.0/0 next-hop 10.0.2.2") Bonne chance Troopy ---------- Original Message ---------------------------------- From: Dams <[EMAIL PROTECTED]> Date: Thu, 6 Dec 2007 18:01:08 +0700 >Hello, > > >I have a problem with the DHCP-relay > >Config: > dhcp-relay { > interface eth0 > interface eth2 > server 192.168.2.2 > relay-options { > } > > >Eth0 conect to my DHCP server (win 2k3 Server) : 192.168.2.2 >and Eth1 to a subnet : 192.168.10.X > >But the dhcp relay doesn't work >XXXXX:~# tcpdump -n port 67 >tcpdump: verbose output suppressed, use -v or -vv for full protocol decode >listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes >17:50:29.636059 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from >XXXXX, length 300 >17:50:33.376048 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from >XXXXX, length 300 >17:50:38.370026 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from >XXXXX, length 300 >17:50:47.370767 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from >XXXXX, length 300 >17:51:03.369141 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from >XXXXX, length 300 > > >But If I add the MAC on static in my DHCP Server, it work fine. > >XXX:~# tcpdump -n port 67 >tcpdump: verbose output suppressed, use -v or -vv for full protocol decode >listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes >17:11:28.052775 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from >XXXXX, length 300 >17:11:28.053871 IP 192.168.10.1.67 > 255.255.255.255.68: BOOTP/DHCP, Reply, >length 318 >17:11:28.055461 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from >XXXXX, length 302 >17:11:28.056391 IP 192.168.10.1.67 > 255.255.255.255.68: BOOTP/DHCP, Reply, >length 318 > > >What did I miss ? > > >I follow the HowTo >http://www.openmaniak.com/vyatta_case_dhcp.php#dhcp-process which is >brilliant, thanks. >The only differents is that my DHCP is not on the router, but on another PC. > >Do I need to add a route to define the DHCP Server? >Do i need to add a data on the server to ask him to take the request form >the Vyatta Router ? > > >Thanks for your help >-- >Cordialement / Sincerely >Damien >MEP Volunteer Indonesia / Volontaire MEP Indonesia >http://www.mepasie.org > > > ______________________________________________________ Désirez vous une adresse éléctronique @suisse.com? Visitez la Suisse virtuelle sur http://www.suisse.com _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users