Hi there is only the weatherstation running on the rpi usb. The other system you are referring are running on other rpi. this one is dedicated to weewx only. there is no other usb device connected on it. , no keyboard, no screen, simple headless rpi without any other software installed on it except for the one installed by default by raspbian plus screen and vncserver. the power supply is a branded 3A USB power supply and i did try with other power supply. i did change the file /home/weewx/user/forrecat.py nd the /etc/ i did change the /etc/rsyslog.conf as suggested
On Tuesday, January 17, 2017 at 4:57:14 PM UTC+7, Andrew Milner wrote: > > Are you certain you applied the changes? > > The log still shows the error Matthew corrected occurred just around the > time it stopped reporting > and > The log started to give the error that should have been cleared by my > change. > > However - the I/O error you got from the USB does imply a USB error > situation is lurking somewhere > > Since you appear to be running with network, USB radio and other possible > USB devices - are you using the official WHITE 5.1V 2.5A RPi3 power > supply?? The RPi is very finicky when it comes to power supplies and power > spikes etc - especially where network and USB power is concerned. I always > use a powered USB hub for usb devices. As you are running off a generator > could this be a cause of issues? The other Pis you have running do not > appear to be working as hard as your weather station one will be. > > Matthew did suggest disabling the foprecasting whilst trying to resolve > your problems - but I see you still have forecasting enabled. > > Running wioth the simulator would not be exercising the RPi in the same > way as running with the station, and like Matthew I would be more > suspicious of the RPi and the environment than weewx and the driver. Keep > all usb cables well away from the RPi, power supplies, screens etc. > > > > On Tuesday, 17 January 2017 10:18:08 UTC+2, Marc Aubry wrote: > >> Hi, >> Just stop reporting 12:15 local time >> please find attached syslog. >> there is a new interesting message in the syslog >> >> weatherstation weewx[1508]: wh23xx: get_current: could not detach kernel >> driver from interface 0: No data available >> >> >> i was running weewx directly on the console with weewxd >> the console was showing: >> >> 4630124, dewpoint: 18.1644912704, heatindex: 31.7465325172, humidex: >> 36.9270806694, inDewpoint: 61.3511118401, inHumidity: 44, inTemp: 29.9, >> luminosity: 163463.4, maxSolarRad: 1049.29595861, outHumidity: 47, outTemp: >> 30.8, pressure: 1010.7, radiation: 1291.36086, rain: 0.0, rainRate: 0.0, >> usUnits: 16, UV: 11, uv_raw: 4707, windchill: 30.8, windDir: 180, windGust: >> 2.52000626344, windSpeed: 1.08000268433 >> REC: 2017-01-17 12:15:00 WIB (1484630100) altimeter: 1011.05970952, >> appTemp: 32.2804131054, barometer: 1011.32893478, cloudbase: 1566.52849627, >> dateTime: 1484630100.0, dewpoint: 17.9667744592, ET: 0.00931318400731, >> heatindex: 31.3295548186, humidex: 36.4708326323, inDewpoint: >> 62.1629006698, inHumidity: 45.1, inTemp: 29.97, interval: 5, luminosity: >> 157830.85, maxSolarRad: 1048.23640656, outHumidity: 47.25, outTemp: 30.49, >> pressure: 1010.76, radiation: 1246.863715, rain: 0.0, rainRate: 0.0, >> usUnits: 16, UV: 11.0, uv_raw: 4707.0, windchill: 30.49, windDir: >> 185.798196225, windGust: 12.960064424, windGustDir: None, windrun: >> 15.3518033795, windSpeed: 5.09402532221 >> LOOP: 2017-01-17 12:15:24 WIB (1484630124) altimeter: 1010.99968069, >> appTemp: 33.4553572395, barometer: 1011.26832054, cloudbase: 1580.52915436, >> dateTime: 1484630124, dewpoint: 18.1644912704, heatindex: 31.7465325172, >> humidex: 36.9270806694, inDewpoint: 61.3511118401, inHumidity: 44, inTemp: >> 29.9, luminosity: 163463.4, maxSolarRad: 1049.29595861, outHumidity: 47, >> outTemp: 30.8, pressure: 1010.7, radiation: 1291.36086, rain: 0.0, >> rainRate: 0.0, usUnits: 16, UV: 11, uv_raw: 4707, windchill: 30.8, windDir: >> 180, windGust: 2.52000626344, windSpeed: 1.08000268433 >> >> >> I hope it will help.... >> >> >> On Tuesday, January 17, 2017 at 12:04:46 PM UTC+7, Andrew Milner wrote: >>> >>> Marc - if it freezes again you should post a new log - especially since >>> you have now made changes to both the forecast module (which should >>> eliminate forecast related error messages) and also to syslog.conf (which >>> hopefully removes even more logged messages). We don't want to be looking >>> at the wrong log for the current situation!! >>> >>> >>> >>> On Tuesday, 17 January 2017 06:33:46 UTC+2, Marc Aubry wrote: >>> >>>> Yes i did. >>>> Wait and see >>>> So far so good >>>> thanks >>>> >>>> >>>> On Tuesday, January 17, 2017 at 10:38:36 AM UTC+7, Andrew Milner wrote: >>>>> >>>>> Yes, that's what I was referring to ..... >>>>> >>>>> Have you tried amending the syslog.conf as I suggested in previous >>>>> posting to see if that is causing your weewx to freeze? >>>>> >>>>> >>>>> >>>>> On Tuesday, 17 January 2017 05:26:20 UTC+2, Marc Aubry wrote: >>>>> >>>>>> Hi andrew >>>>>> are your referring to this forecast error? >>>>>> >>>>>> Jan 16 22:40:27 weatherstation weewx[645]: forecast: OWMThread: OWM: >>>>>> forecast failure: global name 'periods' is not defined >>>>>> Jan 16 22:40:27 weatherstation weewx[645]: File >>>>>> "/home/weewx/bin/user/forecas .py", line 1173, in do_forecast >>>>>> >>>>>> I do not know where it' is coming from... >>>>>> My forecast install is standard as described in the forecast >>>>>> instrucrion. >>>>>> >>>>>> >>>>>> >>>>>> On Monday, January 16, 2017 at 6:37:29 PM UTC+7, Andrew Milner wrote: >>>>>>> >>>>>>> PS - in case you are unaware there are errors in the log connected >>>>>>> to the forecast module and forecast page ..... don't think they are a >>>>>>> direct cause of your problem though. >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Monday, 16 January 2017 13:08:37 UTC+2, Marc Aubry wrote: >>>>>>> >>>>>>>> Hi >>>>>>>> The weewx has just stop reporting and i did a lsusb command and it >>>>>>>> look the same then before it stop reporting. >>>>>>>> so it is not a problem of usb port changing name or order. >>>>>>>> >>>>>>>> Bus 001 Device 004: ID 10c4:8468 Cygnal Integrated Products, Inc. >>>>>>>> Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. >>>>>>>> SMSC9512/9514 Fast Ethernet Adapter >>>>>>>> Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. >>>>>>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Monday, January 16, 2017 at 9:48:58 AM UTC+7, Marc Aubry wrote: >>>>>>>>> >>>>>>>>> Hi, >>>>>>>>> Thanks for this info >>>>>>>>> i have listed the usb devices with lsusb >>>>>>>>> >>>>>>>>> Bus 001 Device 004: ID 10c4:8468 Cygnal Integrated Products, Inc. >>>>>>>>> Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. >>>>>>>>> SMSC9512/9514 Fast Ethernet Adapter >>>>>>>>> Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. >>>>>>>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>>>>>>>> >>>>>>>>> I guess that my weather station is Device 004: ID 10c4:8468 >>>>>>>>> I will wait the next time the weewx stop reporting to check if the >>>>>>>>> device number has changed. >>>>>>>>> I check in my weewx.conf file and i have no such thing as "device >>>>>>>>> link" i just have the following lines referring to the driver i'm >>>>>>>>> using: >>>>>>>>> [WH23xx] >>>>>>>>> # This section is for Fine Offset WH23xx stations >>>>>>>>> # The model name such as Tycon, or TP2700 >>>>>>>>> model = WH2310 >>>>>>>>> # The driver to use >>>>>>>>> driver = user.wh23xx >>>>>>>>> >>>>>>>>> Do i have to add the following "port = /dev/mydevice" in the >>>>>>>>> weewx.conf file? >>>>>>>>> >>>>>>>>> thanks for your help >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On Sunday, January 15, 2017 at 8:58:57 PM UTC+7, Per Edström wrote: >>>>>>>>>> >>>>>>>>>> Apparently my USB-to-COM-port converter is not stable hence >>>>>>>>>> causing weewx to stop (when the device changes). SO I made a link >>>>>>>>>> to the >>>>>>>>>> current device for use in weewx.conf (details in a new thread here >>>>>>>>>> in the >>>>>>>>>> forum). >>>>>>>>>> It seems to work for now.. >>>>>>>>>> >>>>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
