Hi.
I have a Pi3 and an Oregon Scientific WM300 and when I try to start up the
weewx process, I get the following errors:
Dec 31 22:38:41 weather weewx[2163]: engine: Using configuration file
/etc/weewx/weewx.conf
Dec 31 22:38:41 weather weewx[2163]: engine: Loading station type WMR300
(weewx.drivers.wmr300)
Dec 31 22:38:41 weather weewx[2163]: wmr300: driver version is 0.18
Dec 31 22:38:41 weather weewx[2163]: wmr300: usb info: pyusb_version=1.0.0
Dec 31 22:38:41 weather weewx[2163]: wmr300: sensor map is {'outHumidity':
'humidity_1', 'extraDewpoint6': 'dewpoint_7', 'windchill': 'windchill',
'extraDewpoint4': 'dewpoint_5', 'rainRate': 'rain_rate', 'heatindex':
'heatindex_1', 'inTemp': 'temperature_0', 'windGustDir': 'wind_gust_dir',
'extraDewpoint2': 'dewpoint_3', 'extraDewpoint3': 'dewpoint_4',
'extraDewpoint1': 'dewpoint_2', 'barometer': 'barometer', 'extraDewpoint7':
'dewpoint_8', 'dewpoint': 'dewpoint_1', 'extraDewpoint5': 'dewpoint_6',
'extraHumid6': 'humidity_7', 'pressure': 'pressure', 'extraHumid4':
'humidity_5', 'extraHumid5': 'humidity_6', 'extraHumid2': 'humidity_3',
'extraHumid3': 'humidity_4', 'extraHumid1': 'humidity_2', 'extraTemp6':
'temperature_7', 'extraTemp7': 'temperature_8', 'extraTemp4':
'temperature_5', 'extraTemp5': 'temperature_6', 'extraTemp2':
'temperature_3', 'extraTemp3': 'temperature_4', 'extraTemp1':
'temperature_2', 'extraHeatindex3': 'heatindex_4', 'extraHeatindex2':
'heatindex_3', 'extraHeatindex1': 'heatindex_2', 'extraHeatindex7':
'heatindex_8', 'extraHeatindex6': 'heatindex_7', 'extraHeatindex5':
'heatindex_6', 'extraHumid7': 'humidity_8', 'extraHeatindex4':
'heatindex_5', 'windDir': 'wind_dir', 'outTemp': 'temperature_1',
'windSpeed': 'wind_avg', 'inHumidity': 'humidity_0', 'windGust':
'wind_gust'}
Dec 31 22:38:42 weather kernel: [ 1875.571823] usb 1-1.5: reset full-speed
USB device number 4 using dwc_otg
Dec 31 22:38:42 weather weewx[2163]: engine: StdConvert target unit is 0x1
Dec 31 22:38:42 weather weewx[2163]: wxcalculate: The following values will
be calculated: barometer=prefer_hardware, windchill=hardware,
dewpoint=hardware, appTemp=prefer_hardware, rainRate=hardware,
windrun=prefer_hardware, heatindex=hardware, maxSolarRad=prefer_hardware,
humidex=prefer_hardware, pressure=prefer_hardware,
inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware,
cloudbase=prefer_hardware
Dec 31 22:38:42 weather weewx[2163]: wxcalculate: The following algorithms
will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS
Dec 31 22:38:42 weather weewx[2163]: engine: Archive will use data binding
wx_binding
Dec 31 22:38:42 weather weewx[2163]: engine: Record generation will be
attempted in 'hardware'
Dec 31 22:38:42 weather weewx[2163]: engine: Using archive interval of 300
seconds (specified in weewx configuration)
Dec 31 22:38:42 weather weewx[2163]: engine: Using binding 'wx_binding' to
database 'weewx.sdb'
Dec 31 22:38:42 weather weewx[2163]: manager: Starting backfill of daily
summaries
Dec 31 22:38:42 weather weewx[2163]: restx: StationRegistry: Registration
not requested.
Dec 31 22:38:42 weather weewx[2163]: restx: Wunderground: Posting not
enabled.
Dec 31 22:38:42 weather weewx[2163]: restx: PWSweather: Posting not enabled.
Dec 31 22:38:42 weather weewx[2163]: restx: CWOP: Posting not enabled.
Dec 31 22:38:42 weather weewx[2163]: restx: WOW: Posting not enabled.
Dec 31 22:38:42 weather weewx[2163]: restx: AWEKAS: Posting not enabled.
Dec 31 22:38:42 weather weewx[2163]: engine: Starting up weewx version 3.8.0
Dec 31 22:38:42 weather weewx[2163]: wmr300: reading records since *******
N/A ******* ( N/A )
Dec 31 22:38:42 weather weewx[2163]: wmr300: usb failure: [Errno 110]
Operation timed out
Dec 31 22:38:42 weather weewx[2163]: engine: Caught WeeWxIOError: [Errno
110] Operation timed out
Dec 31 22:38:42 weather weewx[2163]: **** Waiting 60 seconds then
retrying...
I've spent a while googling and came across a thread advising us to
download wmr300x.py and place it into /usr/share/weewx/user. This I did.
No change. Should that file be placed somewhere else? Should it be
renamed to remove the 'x'?
My config file is below.
*****
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2015 Tom Keffer <tkef...@gmail.com>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 0
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 3.8.0
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = "London UK"
# Latitude and longitude in decimal degrees
latitude = XXXXXXXXXX
longitude = XXXXXXXXX
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 0, meter
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be
used.
station_type = WMR300
# If you have a website, you may specify an URL
#station_url = http://www.example.com
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 6
##############################################################################
[WMR300]
# This section is for WMR300 weather stations.
# The station model, e.g., WMR300A
model = WMR300
# The driver to use:
driver = weewx.drivers.wmr300
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = false
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
enable = false
username = replace_me
# To guard against parsing errors, put your password in quotes:
password = replace_me
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = false
station = replace_me
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
enable = false
station = replace_me
# To guard against parsing errors, put your password in quotes:
password = replace_me
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
enable = false
station = replace_me
# To guard against parsing errors, put your password in quotes:
password = replace_me
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
enable = false
station = replace_me
# To guard against parsing errors, put your password in quotes:
password = replace_me
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html/weewx
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Each of the following subsections defines a report that will be run.
[[StandardReport]]
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and
other
# customizations. Many of those changes can be made here by
overriding
# parameters, or by modifying templates within the skin itself.
# The StandardReport uses the 'Standard' skin, which contains the
# images, templates and plots for the report.
skin = Standard
[[[Units]]]
[[[[Groups]]]]
group_altitude = foot
group_speed2 = mile_per_hour2
group_pressure = inHg
group_rain = inch
group_rainrate = inch_per_hour
group_temperature = degree_F
group_degree_day = degree_F_day
group_speed = mile_per_hour
[[FTP]]
# FTP'ing the results to a webserver is treated as just another
report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, uncomment and fill out the next four
lines.
#user = replace with the ftp username
#password = replace with the ftp password; put in quotes to guard
against parsing errors.
#server = replace with the ftp server name, e.g, www.threefools.org
#path = replace with the ftp destination directory (e.g., /weather)
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh
using
# public/private key authentication from the user account that weewx
# runs as to the user account on the remote machine where the files
# will be copied.
#
# The following three lines determine where files will be sent.
#server = replace with the rsync server name, e.g,
www.threefools.org
#path = replace with the rsync destination directory (e.g.,
/weather)
#user = replace with the rsync username
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote
file
# deletion, zero to allow files to accumulate remotely.
delete = 0
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of
units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
pressure = 24, 34.5, inHg
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# Derived quantities are calculated by this service. Possible
values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
barometer = prefer_hardware
altimeter = prefer_hardware
windchill = hardware
heatindex = hardware
dewpoint = hardware
inDewpoint = prefer_hardware
rainRate = hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive
interval
# will be downloaded from the station. Otherwise, specify it (in
seconds).
archive_interval = 300
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# The data binding used to save archive records
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.wxmanager.WXDaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_type = SQLite
database_name = weewx.sdb
# MySQL
[[archive_mysql]]
database_type = MySQL
database_name = weewx
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = weewx
# The password for the user name. Put in quotes to guard against
parsing errors.
password = weewx
##############################################################################
# This section configures the internal weewx engine.
[Engine]
[[Services]]
# This section specifies the services that should be run. They are
# grouped by type, and the order of services within each group
# determines the order in which the services will be run.
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert,
weewx.engine.StdCalibrate, weewx.engine.StdQC,
weewx.wxservices.StdWXCalculate
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather,
weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
