Hi, I am trying to get the Peet Brothers Ultimeter 2100 working *reliably*. The issues appears to be the serial-USB converter. The system can run flawless for hours or at other times no more than 10 minutes and then weewx stops updating. I have previously used an Accurite weather station with no issues, so I am only changing the driver by using wee_config.
Looking at the syslog file I get the following messages: ultimeter: driver version is 0.18 ultimeter: using serial port /dev/tty/USB0 import of driver failed: [Errorno2] could not open port /dev/ttyUSB0: [Errorno2] no such file or directory: '/dev/ttyUSB0' engine: unable to load driver: [Errorno2] could not open port /dev/ttryUSB0: no such file or directory: '/dev/ttyUSB0' **** Exiting. . . The USB-serial converter is an FTDI , which in the past I have found to very reliable. weewx version: 3.7.1 Raspberry Pi 2 Any help is greatly appreciated! Terry -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.