Thank you. I think I realise that now however I'm unable to install the HP1000 driver as the instructions on its GitHub page aren't working for me.
Still investigating... On Tue, 15 Oct 2019, 15:56 steeple ian, <steeple...@gmail.com> wrote: > Matt, > You need to use the HP1000 driver or Interceptor driver for this device > not the Fine Offset one. If my memory serves me correctly the FO driver is > for a USB device where as the HP1000 is a wireless device. > Ian > > Sent from my iPhone > > On 15 Oct 2019, at 15:27, Matt <icojo...@gmail.com> wrote: > > > Thank you, that makes perfect sense. I'm sure I followed instructions > which said to select 'Simulator'. I'll change to Fine Offset when I get > home, after I've retrieved the logs. I'll also try to find out more about > how to install the driver for HP1000 but google wasn't too helpful last > night! > > On Tuesday, 15 October 2019 15:13:04 UTC+1, Andrew Milner wrote: >> >> the chances are that your uniform incrementing values are the simulator >> data whic I hthink looks like a sine wave!! >> >> chances are that you are set on simulator and are not reading any data >> from the station. >> >> Only the log will provide the answer. the simulator does exactly what it >> says, it simulates A weather station (Not a specific type) and generates >> data to be put in the database which can then be used to generate reports. >> It is not simulating your specific station!! >> >> when you post the log post from before starting weewx until at keast one >> archive interval has passed - the length of the interval is whatever you >> have specified in weewx.conf >> >> >> >> On Tuesday, 15 October 2019 14:51:24 UTC+3, Matt wrote: >>> >>> Hi All, >>> >>> First post. >>> >>> I got Weewx set up on a brand new Raspberry Pi 3 model B yesterday. I >>> saw that it was posting data but last night most of the data was incorrect >>> (e.g. outside temp 0 degrees C when it was actually 10 degrees). I decided >>> to leave it and went to bed. Today I am seeing better values but all >>> readings appear to be summing/appending to the previous reading. For >>> example, the temperature has risen from 0 to around 21 degrees very >>> uniformly. The actual temperature is around 13 degrees. >>> >>> I have an Aercus station, identical to Fine Offset HP1000. I have set >>> Weewx driver to both 'simulator' and 'Fine Offset' with no change in data. >>> >>> I read somewhere about an HP1000 driver written by aussie susan but >>> editing the daemon file was beyond my capabilities so I couldn't proceed >>> with it. >>> >>> My station can be seen at: https://www.pwsweather.com/obs/ILITTLEW9.html >>> # >>> >>> I appreciate that I will need to provide logs etc, but I am work at the >>> moment and will upload logs later. I just wanted to get the post up to see >>> if anyone had experienced anything similar or has any advice for a newbie. >>> >>> I love the functionality of weewx and look forward to using it. >>> >>> Many thanks in advance. >>> >>> Matt >>> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/a350f353-ffa0-4410-9256-6bbac88444ae%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/a350f353-ffa0-4410-9256-6bbac88444ae%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/18C42336-65BB-409B-BC1B-2C231927FFB3%40gmail.com > <https://groups.google.com/d/msgid/weewx-user/18C42336-65BB-409B-BC1B-2C231927FFB3%40gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAMz6Xq51ZY%2Bcv5Mw6H7U7-VkC74JT8CwNYHQVBJ7%3Dt8mD2sm%2Bg%40mail.gmail.com.