Finally, it's working. Thanks all for your help.
On Tuesday, 15 October 2019 12:51:24 UTC+1, Matt wrote: > > Hi All, > > First post. > > I got Weewx set up on a brand new Raspberry Pi 3 model B yesterday. I saw > that it was posting data but last night most of the data was incorrect > (e.g. outside temp 0 degrees C when it was actually 10 degrees). I decided > to leave it and went to bed. Today I am seeing better values but all > readings appear to be summing/appending to the previous reading. For > example, the temperature has risen from 0 to around 21 degrees very > uniformly. The actual temperature is around 13 degrees. > > I have an Aercus station, identical to Fine Offset HP1000. I have set > Weewx driver to both 'simulator' and 'Fine Offset' with no change in data. > > I read somewhere about an HP1000 driver written by aussie susan but > editing the daemon file was beyond my capabilities so I couldn't proceed > with it. > > My station can be seen at: https://www.pwsweather.com/obs/ILITTLEW9.html# > > I appreciate that I will need to provide logs etc, but I am work at the > moment and will upload logs later. I just wanted to get the post up to see > if anyone had experienced anything similar or has any advice for a newbie. > > I love the functionality of weewx and look forward to using it. > > Many thanks in advance. > > Matt > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/b9fd7665-fec9-493d-913d-b189a3c8f54f%40googlegroups.com.