thank you for the answer. Do you have a brand to come out for the cable and for the USB HUB?
Thanks Le vendredi 25 octobre 2019 23:47:14 UTC+2, mwall a écrit : > > what other devices are connected to the rpi? > > it looks like you are having usb connection problems. you should try the > following: > > - connect the weather station to a powered usb hub instead of directly to > the pi > - do not connect any other device to the pi other than the weather station > - be sure to use a quality usb cable to connect the weather station > - try different operating system versions/releases on the rpi > > also, be sure to use PERIODIC mode, not ADAPTIVE mode in your > configuration. see the weewx guide for more details: > > http://weewx.com/docs/hardware.htm#fousb_notes > > finally, i'm not certain that the console that comes with a bresser 6in1 > is a fine-offset 1080 device. the vendor:product code for 1080 and 3080 > devices is 1941:8021, and i see that in the lsusb output that you posted. > but the pictures i've seen for bresser 6in1 have two different consoles, > and neither one looks like a 1080/2080/3080 device. so i am a bit confused. > > could you post a picture of the console of your console? > > > m > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/d2dd26b5-af8e-4022-9f27-9c99c3d93d69%40googlegroups.com.
